* [PATCH] net: mvpp2: guard flow control update with global_tx_fc in buffer switching
@ 2026-03-16 19:31 Muhammad Hammad Ijaz
2026-03-19 9:50 ` patchwork-bot+netdevbpf
0 siblings, 1 reply; 2+ messages in thread
From: Muhammad Hammad Ijaz @ 2026-03-16 19:31 UTC (permalink / raw)
To: marcin.s.wojtas, linux, andrew+netdev, davem, edumazet, kuba,
pabeni, netdev, linux-kernel
Cc: stefanc, gunnarku, mhijaz
mvpp2_bm_switch_buffers() unconditionally calls
mvpp2_bm_pool_update_priv_fc() when switching between per-cpu and
shared buffer pool modes. This function programs CM3 flow control
registers via mvpp2_cm3_read()/mvpp2_cm3_write(), which dereference
priv->cm3_base without any NULL check.
When the CM3 SRAM resource is not present in the device tree (the
third reg entry added by commit 60523583b07c ("dts: marvell: add CM3
SRAM memory to cp11x ethernet device tree")), priv->cm3_base remains
NULL and priv->global_tx_fc is false. Any operation that triggers
mvpp2_bm_switch_buffers(), for example an MTU change that crosses
the jumbo frame threshold, will crash:
Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000000
Mem abort info:
ESR = 0x0000000096000006
EC = 0x25: DABT (current EL), IL = 32 bits
pc : readl+0x0/0x18
lr : mvpp2_cm3_read.isra.0+0x14/0x20
Call trace:
readl+0x0/0x18
mvpp2_bm_pool_update_fc+0x40/0x12c
mvpp2_bm_pool_update_priv_fc+0x94/0xd8
mvpp2_bm_switch_buffers.isra.0+0x80/0x1c0
mvpp2_change_mtu+0x140/0x380
__dev_set_mtu+0x1c/0x38
dev_set_mtu_ext+0x78/0x118
dev_set_mtu+0x48/0xa8
dev_ifsioc+0x21c/0x43c
dev_ioctl+0x2d8/0x42c
sock_ioctl+0x314/0x378
Every other flow control call site in the driver already guards
hardware access with either priv->global_tx_fc or port->tx_fc.
mvpp2_bm_switch_buffers() is the only place that omits this check.
Add the missing priv->global_tx_fc guard to both the disable and
re-enable calls in mvpp2_bm_switch_buffers(), consistent with the
rest of the driver.
Fixes: 3a616b92a9d1 ("net: mvpp2: Add TX flow control support for jumbo frames")
Signed-off-by: Muhammad Hammad Ijaz <mhijaz@amazon.com>
Reviewed-by: Gunnar Kudrjavets <gunnarku@amazon.com>
---
Testing:
- Tested on Marvell Armada 7040 board without CM3 SRAM in device tree
- Without the fix, MTU change triggers a NULL pointer dereference
in mvpp2_cm3_read()
- With the fix, MTU change completes successfully
---
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index d1b8650cb4b4..f442b874bb59 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -5016,7 +5016,7 @@ static int mvpp2_bm_switch_buffers(struct mvpp2 *priv, bool percpu)
if (priv->percpu_pools)
numbufs = port->nrxqs * 2;
- if (change_percpu)
+ if (change_percpu && priv->global_tx_fc)
mvpp2_bm_pool_update_priv_fc(priv, false);
for (i = 0; i < numbufs; i++)
@@ -5041,7 +5041,7 @@ static int mvpp2_bm_switch_buffers(struct mvpp2 *priv, bool percpu)
mvpp2_open(port->dev);
}
- if (change_percpu)
+ if (change_percpu && priv->global_tx_fc)
mvpp2_bm_pool_update_priv_fc(priv, true);
return 0;
--
2.53.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] net: mvpp2: guard flow control update with global_tx_fc in buffer switching
2026-03-16 19:31 [PATCH] net: mvpp2: guard flow control update with global_tx_fc in buffer switching Muhammad Hammad Ijaz
@ 2026-03-19 9:50 ` patchwork-bot+netdevbpf
0 siblings, 0 replies; 2+ messages in thread
From: patchwork-bot+netdevbpf @ 2026-03-19 9:50 UTC (permalink / raw)
To: Muhammad Hammad Ijaz
Cc: marcin.s.wojtas, linux, andrew+netdev, davem, edumazet, kuba,
pabeni, netdev, linux-kernel, stefanc, gunnarku
Hello:
This patch was applied to netdev/net.git (main)
by Paolo Abeni <pabeni@redhat.com>:
On Mon, 16 Mar 2026 12:31:01 -0700 you wrote:
> mvpp2_bm_switch_buffers() unconditionally calls
> mvpp2_bm_pool_update_priv_fc() when switching between per-cpu and
> shared buffer pool modes. This function programs CM3 flow control
> registers via mvpp2_cm3_read()/mvpp2_cm3_write(), which dereference
> priv->cm3_base without any NULL check.
>
> When the CM3 SRAM resource is not present in the device tree (the
> third reg entry added by commit 60523583b07c ("dts: marvell: add CM3
> SRAM memory to cp11x ethernet device tree")), priv->cm3_base remains
> NULL and priv->global_tx_fc is false. Any operation that triggers
> mvpp2_bm_switch_buffers(), for example an MTU change that crosses
> the jumbo frame threshold, will crash:
>
> [...]
Here is the summary with links:
- net: mvpp2: guard flow control update with global_tx_fc in buffer switching
https://git.kernel.org/netdev/net/c/8a63baadf084
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-03-19 9:50 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-03-16 19:31 [PATCH] net: mvpp2: guard flow control update with global_tx_fc in buffer switching Muhammad Hammad Ijaz
2026-03-19 9:50 ` patchwork-bot+netdevbpf
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox