[PATCH iwl-next v2 0/2] igc: enable build_skb path

[Kohei Enju <kohei@enjuk.jp>]

This series enables the build_skb RX path in igc, which is currently not
enabled in any configuration.

Patch 1/2 adds missing RX hardware timestamp handling in the build_skb
path.
Patch 2/2 enables the build_skb path when XDP is inactive and other
conditions are met.

Tested on Intel Corporation Ethernet Controller I226-V (rev 04).

Changes:
  v2:
    - don't insist on reverse christmas tree, reducing net diff in the
      patch 1/2 (Dima)
  v1: https://lore.kernel.org/intel-wired-lan/20260307182808.155027-1-kohei@enjuk.jp/

Kohei Enju (2):
  igc: set RX hardware timestamps in igc_build_skb()
  igc: enable build_skb on the non-XDP small-frame RX path

 drivers/net/ethernet/intel/igc/igc.h      |  4 ++++
 drivers/net/ethernet/intel/igc/igc_main.c | 14 ++++++++++++--
 2 files changed, 16 insertions(+), 2 deletions(-)

-- 
2.51.0