[PATCH v1 4/7] ARM: dts: stm32: stm32mp15x-mecio1-io: Fix GPIO names typo

[Oleksij Rempel <o.rempel@pengutronix.de>]

From: David Jander <david@protonic.nl>

The reset pins for the LPOUT lines were incorrectly prefixed with "GPOUT"
instead of "LPOUT" in the gpio-line-names array. Fix these typos so the
pin names consistently match the LPOUT0-4 signals they belong to.

Fixes: 8267753c891c ("ARM: dts: stm32: Add MECIO1 and MECT1S board variants")
Cc: <stable@vger.kernel.org>
Signed-off-by: David Jander <david@protonic.nl>
Co-developed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi b/arch/arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi
index f91b3d1f037b..e50e9ae085e8 100644
--- a/arch/arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi
@@ -185,14 +185,14 @@ &gpiod {
 &gpioe {
 	gpio-line-names = "HPOUT0_RESETN", "HPOUT1", "HPOUT1_ALERTN", "",
 			  "", "", "HPOUT1_RESETN",
-			  "LPOUT0", "LPOUT0_ALERTN", "GPOUT0_RESETN",
-			  "LPOUT1", "LPOUT1_ALERTN", "GPOUT1_RESETN",
-			  "LPOUT2", "LPOUT2_ALERTN", "GPOUT2_RESETN";
+			  "LPOUT0", "LPOUT0_ALERTN", "LPOUT0_RESETN",
+			  "LPOUT1", "LPOUT1_ALERTN", "LPOUT1_RESETN",
+			  "LPOUT2", "LPOUT2_ALERTN", "LPOUT2_RESETN";
 };
 
 &gpiof {
-	gpio-line-names = "LPOUT3", "LPOUT3_ALERTN", "GPOUT3_RESETN",
-			  "LPOUT4", "LPOUT4_ALERTN", "GPOUT4_RESETN",
+	gpio-line-names = "LPOUT3", "LPOUT3_ALERTN", "LPOUT3_RESETN",
+			  "LPOUT4", "LPOUT4_ALERTN", "LPOUT4_RESETN",
 			  "", "",
 			  "", "", "", "",
 			  "", "", "", "";
-- 
2.47.3