From: Vladimir Oltean <vladimir.oltean@nxp.com>
To: linux-phy@lists.infradead.org
Cc: Vinod Koul <vkoul@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
dri-devel@lists.freedesktop.org, freedreno@lists.freedesktop.org,
linux-arm-kernel@lists.infradead.org,
linux-arm-msm@vger.kernel.org, linux-can@vger.kernel.org,
linux-gpio@vger.kernel.org, linux-ide@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
linux-pci@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
linux-riscv@lists.infradead.org,
linux-rockchip@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-scsi@vger.kernel.org,
linux-sunxi@lists.linux.dev, linux-tegra@vger.kernel.org,
linux-usb@vger.kernel.org, netdev@vger.kernel.org,
spacemit@lists.linux.dev, UNGLinuxDriver@microchip.com,
Markus Schneider-Pargmann <msp@baylibre.com>,
Andrzej Hajda <andrzej.hajda@intel.com>,
Robert Foss <rfoss@kernel.org>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
Jonas Karlman <jonas@kwiboo.se>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
Andy Yan <andy.yan@rock-chips.com>,
Marc Kleine-Budde <mkl@pengutronix.de>,
Vincent Mailhol <mailhol@kernel.org>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Claudiu Beznea <claudiu.beznea@tuxon.dev>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>
Subject: [PATCH v5 phy-next 17/27] phy: introduce phy_get_max_link_rate() helper for consumers
Date: Fri, 20 Mar 2026 00:32:31 +0200 [thread overview]
Message-ID: <20260319223241.1351137-18-vladimir.oltean@nxp.com> (raw)
In-Reply-To: <20260319223241.1351137-1-vladimir.oltean@nxp.com>
Consumer drivers shouldn't dereference struct phy, not even to get to
its attributes.
We have phy_get_bus_width() as a precedent for getting the bus_width
attribute, so let's add phy_get_max_link_rate() and use it in DRM and
CAN drivers.
In CAN drivers, the transceiver is acquired through devm_phy_optional_get()
and NULL is given by the API as a non-error case, so the PHY API should
also tolerate NULL coming back to it. This means we can further simplify
the call sites that test for the NULL quality of the transceiver.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Markus Schneider-Pargmann <msp@baylibre.com> # m_can
---
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Andy Yan <andy.yan@rock-chips.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Vincent Mailhol <mailhol@kernel.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Cc: Markus Schneider-Pargmann <msp@baylibre.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Magnus Damm <magnus.damm@gmail.com>
v3->v5: none
v2->v3: collect tag
v1->v2: make phy_get_bus_width() NULL-tolerant to simplify CAN callers
---
drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c | 4 ++--
drivers/gpu/drm/bridge/synopsys/dw-dp.c | 2 +-
drivers/net/can/at91_can.c | 3 +--
drivers/net/can/flexcan/flexcan-core.c | 3 +--
drivers/net/can/m_can/m_can_platform.c | 3 +--
drivers/net/can/rcar/rcar_canfd.c | 3 +--
drivers/phy/phy-core.c | 9 +++++++++
include/linux/phy/phy.h | 6 ++++++
8 files changed, 22 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
index a8b6ae58cb0a..ed7ed82ddb64 100644
--- a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
@@ -1300,7 +1300,7 @@ static u32 cdns_mhdp_get_training_interval_us(struct cdns_mhdp_device *mhdp,
static void cdns_mhdp_fill_host_caps(struct cdns_mhdp_device *mhdp)
{
- unsigned int link_rate;
+ u32 link_rate;
/* Get source capabilities based on PHY attributes */
@@ -1308,7 +1308,7 @@ static void cdns_mhdp_fill_host_caps(struct cdns_mhdp_device *mhdp)
if (!mhdp->host.lanes_cnt)
mhdp->host.lanes_cnt = 4;
- link_rate = mhdp->phy->attrs.max_link_rate;
+ link_rate = phy_get_max_link_rate(mhdp->phy);
if (!link_rate)
link_rate = drm_dp_bw_code_to_link_rate(DP_LINK_BW_8_1);
else
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-dp.c b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
index 4ab6922dd79c..79c72ee8e263 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-dp.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
@@ -536,7 +536,7 @@ static int dw_dp_link_parse(struct dw_dp *dp, struct drm_connector *connector)
link->revision = link->dpcd[DP_DPCD_REV];
link->rate = min_t(u32, min(dp->plat_data.max_link_rate,
- dp->phy->attrs.max_link_rate * 100),
+ phy_get_max_link_rate(dp->phy) * 100),
drm_dp_max_link_rate(link->dpcd));
link->lanes = min_t(u8, phy_get_bus_width(dp->phy),
drm_dp_max_lane_count(link->dpcd));
diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index 58da323f14d7..7749da0a58f6 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -1125,8 +1125,7 @@ static int at91_can_probe(struct platform_device *pdev)
can_rx_offload_add_timestamp(dev, &priv->offload);
- if (transceiver)
- priv->can.bitrate_max = transceiver->attrs.max_link_rate;
+ priv->can.bitrate_max = phy_get_max_link_rate(transceiver);
if (at91_is_sam9263(priv))
dev->sysfs_groups[0] = &at91_sysfs_attr_group;
diff --git a/drivers/net/can/flexcan/flexcan-core.c b/drivers/net/can/flexcan/flexcan-core.c
index f5d22c61503f..093e48b8da58 100644
--- a/drivers/net/can/flexcan/flexcan-core.c
+++ b/drivers/net/can/flexcan/flexcan-core.c
@@ -2210,8 +2210,7 @@ static int flexcan_probe(struct platform_device *pdev)
priv->reg_xceiver = reg_xceiver;
priv->transceiver = transceiver;
- if (transceiver)
- priv->can.bitrate_max = transceiver->attrs.max_link_rate;
+ priv->can.bitrate_max = phy_get_max_link_rate(transceiver);
if (priv->devtype_data.quirks & FLEXCAN_QUIRK_NR_IRQ_3) {
priv->irq_boff = platform_get_irq(pdev, 1);
diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c
index 56da411878af..2a0f163a683a 100644
--- a/drivers/net/can/m_can/m_can_platform.c
+++ b/drivers/net/can/m_can/m_can_platform.c
@@ -131,8 +131,7 @@ static int m_can_plat_probe(struct platform_device *pdev)
goto probe_fail;
}
- if (transceiver)
- mcan_class->can.bitrate_max = transceiver->attrs.max_link_rate;
+ mcan_class->can.bitrate_max = phy_get_max_link_rate(transceiver);
priv->base = addr;
priv->mram_base = mram_addr;
diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c
index eaf8cac78038..9062db48d477 100644
--- a/drivers/net/can/rcar/rcar_canfd.c
+++ b/drivers/net/can/rcar/rcar_canfd.c
@@ -1884,8 +1884,7 @@ static int rcar_canfd_channel_probe(struct rcar_canfd_global *gpriv, u32 ch,
priv->transceiver = transceiver;
priv->channel = ch;
priv->gpriv = gpriv;
- if (transceiver)
- priv->can.bitrate_max = transceiver->attrs.max_link_rate;
+ priv->can.bitrate_max = phy_get_max_link_rate(transceiver);
priv->can.clock.freq = fcan_freq;
dev_info(dev, "can_clk rate is %u\n", priv->can.clock.freq);
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index 0d0be494cfd7..737a760d97d1 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -647,6 +647,15 @@ void phy_set_bus_width(struct phy *phy, int bus_width)
}
EXPORT_SYMBOL_GPL(phy_set_bus_width);
+u32 phy_get_max_link_rate(struct phy *phy)
+{
+ if (!phy)
+ return 0;
+
+ return phy->attrs.max_link_rate;
+}
+EXPORT_SYMBOL_GPL(phy_get_max_link_rate);
+
/**
* _of_phy_get() - lookup and obtain a reference to a phy by phandle
* @np: device_node for which to get the phy
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index a7e2432ca1ae..34b656084caf 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -57,6 +57,7 @@ int phy_notify_disconnect(struct phy *phy, int port);
int phy_notify_state(struct phy *phy, union phy_notify state);
int phy_get_bus_width(struct phy *phy);
void phy_set_bus_width(struct phy *phy, int bus_width);
+u32 phy_get_max_link_rate(struct phy *phy);
#else
static inline struct phy *phy_get(struct device *dev, const char *string)
{
@@ -256,6 +257,11 @@ static inline int phy_get_bus_width(struct phy *phy)
static inline void phy_set_bus_width(struct phy *phy, int bus_width)
{
}
+
+static inline u32 phy_get_max_link_rate(struct phy *phy)
+{
+ return 0;
+}
#endif /* IS_ENABLED(CONFIG_GENERIC_PHY) */
#endif /* __PHY_CONSUMER_H */
--
2.43.0
next prev parent reply other threads:[~2026-03-19 22:33 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-19 22:32 [PATCH v5 phy-next 00/27] Split Generic PHY consumer and provider API Vladimir Oltean
2026-03-19 22:32 ` [PATCH v5 phy-next 01/27] ata: add <linux/pm_runtime.h> where missing Vladimir Oltean
2026-03-19 22:32 ` [PATCH v5 phy-next 02/27] PCI: Add missing headers transitively included by <linux/phy/phy.h> Vladimir Oltean
2026-03-19 22:32 ` [PATCH v5 phy-next 03/27] usb: add " Vladimir Oltean
2026-03-19 22:32 ` [PATCH v5 phy-next 04/27] drm: add <linux/pm_runtime.h> where missing Vladimir Oltean
2026-03-19 22:32 ` [PATCH v5 phy-next 05/27] phy: " Vladimir Oltean
2026-03-19 22:32 ` [PATCH v5 phy-next 06/27] phy: spacemit: include missing <linux/phy/phy.h> Vladimir Oltean
2026-03-19 22:32 ` [PATCH v5 phy-next 07/27] net: lan969x: include missing <linux/of.h> Vladimir Oltean
2026-03-19 22:32 ` [PATCH v5 phy-next 08/27] PCI: Remove device links to PHY Vladimir Oltean
2026-03-24 5:35 ` Manivannan Sadhasivam
2026-03-19 22:32 ` [PATCH v5 phy-next 09/27] scsi: ufs: exynos: stop poking into struct phy guts Vladimir Oltean
2026-03-20 2:15 ` Martin K. Petersen
2026-03-20 8:22 ` Vladimir Oltean
2026-03-23 11:58 ` Vladimir Oltean
2026-03-23 12:35 ` Alim Akhtar
2026-03-23 22:41 ` Vladimir Oltean
2026-03-23 17:26 ` Alim Akhtar
2026-03-19 22:32 ` [PATCH v5 phy-next 10/27] scsi: ufs: qcom: keep parallel track of PHY power state Vladimir Oltean
2026-03-24 5:30 ` Manivannan Sadhasivam
2026-03-25 11:43 ` Vladimir Oltean
2026-03-25 11:51 ` Manivannan Sadhasivam
2026-03-25 11:57 ` Vladimir Oltean
2026-03-26 8:04 ` Vladimir Oltean
2026-03-19 22:32 ` [PATCH v5 phy-next 11/27] drm/rockchip: dw_hdmi: avoid direct dereference of phy->dev.of_node Vladimir Oltean
2026-03-19 22:32 ` [PATCH v5 phy-next 12/27] usb: host: tegra: " Vladimir Oltean
2026-03-19 22:32 ` [PATCH v5 phy-next 13/27] usb: gadget: tegra-xudc: " Vladimir Oltean
2026-03-19 22:32 ` [PATCH v5 phy-next 14/27] drm/msm/dp: remove debugging prints with internal struct phy state Vladimir Oltean
2026-03-19 22:32 ` [PATCH v5 phy-next 15/27] phy: move provider API out of public <linux/phy/phy.h> Vladimir Oltean
2026-03-19 22:32 ` [PATCH v5 phy-next 16/27] phy: make phy_get_mode(), phy_(get|set)_bus_width() NULL tolerant Vladimir Oltean
2026-03-19 22:32 ` Vladimir Oltean [this message]
2026-03-19 22:32 ` [PATCH v5 phy-next 18/27] drm/rockchip: dsi: include PHY provider header Vladimir Oltean
2026-03-19 22:32 ` [PATCH v5 phy-next 19/27] drm: bridge: cdns-mhdp8546: use consumer API for getting PHY bus width Vladimir Oltean
2026-03-19 22:32 ` [PATCH v5 phy-next 20/27] media: sunxi: a83-mips-csi2: include PHY provider header Vladimir Oltean
2026-03-19 22:32 ` [PATCH v5 phy-next 21/27] net: renesas: rswitch: " Vladimir Oltean
2026-03-19 22:32 ` [PATCH v5 phy-next 22/27] pinctrl: tegra-xusb: " Vladimir Oltean
2026-03-19 22:32 ` [PATCH v5 phy-next 23/27] power: supply: cpcap-charger: include missing <linux/property.h> Vladimir Oltean
2026-03-19 22:32 ` [PATCH v5 phy-next 24/27] phy: include PHY provider header (1/2) Vladimir Oltean
2026-03-19 22:32 ` [PATCH v5 phy-next 25/27] phy: include PHY provider header (2/2) Vladimir Oltean
2026-03-19 22:32 ` [PATCH v5 phy-next 26/27] phy: remove temporary provider compatibility from consumer header Vladimir Oltean
2026-03-19 22:32 ` [PATCH v5 phy-next 27/27] MAINTAINERS: add regexes for linux-phy Vladimir Oltean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260319223241.1351137-18-vladimir.oltean@nxp.com \
--to=vladimir.oltean@nxp.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=airlied@gmail.com \
--cc=alexandre.belloni@bootlin.com \
--cc=andrzej.hajda@intel.com \
--cc=andy.yan@rock-chips.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=dri-devel@lists.freedesktop.org \
--cc=freedreno@lists.freedesktop.org \
--cc=geert+renesas@glider.be \
--cc=jernej.skrabec@gmail.com \
--cc=jonas@kwiboo.se \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=linux-tegra@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=magnus.damm@gmail.com \
--cc=mailhol@kernel.org \
--cc=mkl@pengutronix.de \
--cc=mripard@kernel.org \
--cc=msp@baylibre.com \
--cc=neil.armstrong@linaro.org \
--cc=netdev@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=rfoss@kernel.org \
--cc=simona@ffwll.ch \
--cc=spacemit@lists.linux.dev \
--cc=tzimmermann@suse.de \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox