From: Chih Kai Hsu <hsu.chih.kai@realtek.com>
To: <kuba@kernel.org>, <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <nic_swsd@realtek.com>,
<linux-kernel@vger.kernel.org>, <linux-usb@vger.kernel.org>,
<edumazet@google.com>, <bjorn@mork.no>, <pabeni@redhat.com>,
Chih Kai Hsu <hsu.chih.kai@realtek.com>
Subject: [PATCH net-next v3 1/2] r8152: add helper functions for PLA/USB OCP registers
Date: Mon, 23 Mar 2026 16:22:25 +0800 [thread overview]
Message-ID: <20260323082226.2601-451-nic_swsd@realtek.com> (raw)
In-Reply-To: <20260323082226.2601-450-nic_swsd@realtek.com>
Add the following bitwise operaion functions for PLA/USB OCP registers
to simplify the code.
- ocp_dword_w0w1()
- ocp_word_w0w1()
- ocp_byte_w0w1()
- ocp_dword_clr_bits()
- ocp_dword_set_bits()
- ocp_word_clr_bits()
- ocp_word_set_bits()
- ocp_word_test_and_clr_bits()
- ocp_byte_clr_bits()
- ocp_byte_set_bits()
Signed-off-by: Chih Kai Hsu <hsu.chih.kai@realtek.com>
---
drivers/net/usb/r8152.c | 1103 +++++++++++++++------------------------
1 file changed, 408 insertions(+), 695 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 3b6d4252d34c..ba6dc4dbfd80 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1654,6 +1654,78 @@ void write_mii_word(struct net_device *netdev, int phy_id, int reg, int val)
r8152_mdio_write(tp, reg, val);
}
+static void
+ocp_dword_w0w1(struct r8152 *tp, u16 type, u16 index, u32 clear, u32 set)
+{
+ u32 ocp_data;
+
+ ocp_data = ocp_read_dword(tp, type, index);
+ ocp_data = (ocp_data & ~clear) | set;
+ ocp_write_dword(tp, type, index, ocp_data);
+}
+
+static void
+ocp_word_w0w1(struct r8152 *tp, u16 type, u16 index, u16 clear, u16 set)
+{
+ u16 ocp_data;
+
+ ocp_data = ocp_read_word(tp, type, index);
+ ocp_data = (ocp_data & ~clear) | set;
+ ocp_write_word(tp, type, index, ocp_data);
+}
+
+static void
+ocp_byte_w0w1(struct r8152 *tp, u16 type, u16 index, u8 clear, u8 set)
+{
+ u8 ocp_data;
+
+ ocp_data = ocp_read_byte(tp, type, index);
+ ocp_data = (ocp_data & ~clear) | set;
+ ocp_write_byte(tp, type, index, ocp_data);
+}
+
+static void ocp_dword_clr_bits(struct r8152 *tp, u16 type, u16 index, u32 clear)
+{
+ ocp_dword_w0w1(tp, type, index, clear, 0);
+}
+
+static void ocp_dword_set_bits(struct r8152 *tp, u16 type, u16 index, u32 set)
+{
+ ocp_dword_w0w1(tp, type, index, 0, set);
+}
+
+static void ocp_word_clr_bits(struct r8152 *tp, u16 type, u16 index, u16 clear)
+{
+ ocp_word_w0w1(tp, type, index, clear, 0);
+}
+
+static void ocp_word_set_bits(struct r8152 *tp, u16 type, u16 index, u16 set)
+{
+ ocp_word_w0w1(tp, type, index, 0, set);
+}
+
+static int
+ocp_word_test_and_clr_bits(struct r8152 *tp, u16 type, u16 index, u16 clear)
+{
+ u16 ocp_data;
+
+ ocp_data = ocp_read_word(tp, type, index);
+ if (ocp_data & clear)
+ ocp_write_word(tp, type, index, ocp_data & ~clear);
+
+ return ocp_data & clear;
+}
+
+static void ocp_byte_clr_bits(struct r8152 *tp, u16 type, u16 index, u8 clear)
+{
+ ocp_byte_w0w1(tp, type, index, clear, 0);
+}
+
+static void ocp_byte_set_bits(struct r8152 *tp, u16 type, u16 index, u8 set)
+{
+ ocp_byte_w0w1(tp, type, index, 0, set);
+}
+
static int
r8152_submit_rx(struct r8152 *tp, struct rx_agg *agg, gfp_t mem_flags);
@@ -2956,47 +3028,31 @@ static netdev_tx_t rtl8152_start_xmit(struct sk_buff *skb,
static void r8152b_reset_packet_filter(struct r8152 *tp)
{
- u32 ocp_data;
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_FMC);
- ocp_data &= ~FMC_FCR_MCU_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_FMC, ocp_data);
- ocp_data |= FMC_FCR_MCU_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_FMC, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_FMC, FMC_FCR_MCU_EN);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_FMC, FMC_FCR_MCU_EN);
}
static void rtl8152_nic_reset(struct r8152 *tp)
{
- u32 ocp_data;
int i;
switch (tp->version) {
case RTL_TEST_01:
case RTL_VER_10:
case RTL_VER_11:
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR);
- ocp_data &= ~CR_TE;
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data);
+ ocp_byte_clr_bits(tp, MCU_TYPE_PLA, PLA_CR, CR_TE);
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_BMU_RESET);
- ocp_data &= ~BMU_RESET_EP_IN;
- ocp_write_word(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_BMU_RESET,
+ BMU_RESET_EP_IN);
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
- ocp_data |= CDC_ECM_EN;
- ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_USB, USB_USB_CTRL, CDC_ECM_EN);
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR);
- ocp_data &= ~CR_RE;
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data);
+ ocp_byte_clr_bits(tp, MCU_TYPE_PLA, PLA_CR, CR_RE);
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_BMU_RESET);
- ocp_data |= BMU_RESET_EP_IN;
- ocp_write_word(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_USB, USB_BMU_RESET,
+ BMU_RESET_EP_IN);
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
- ocp_data &= ~CDC_ECM_EN;
- ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_USB_CTRL, CDC_ECM_EN);
break;
default:
@@ -3025,14 +3081,12 @@ static inline u16 rtl8152_get_speed(struct r8152 *tp)
static void rtl_eee_plus_en(struct r8152 *tp, bool enable)
{
- u32 ocp_data;
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
if (enable)
- ocp_data |= EEEP_CR_EEEP_TX;
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_EEEP_CR,
+ EEEP_CR_EEEP_TX);
else
- ocp_data &= ~EEEP_CR_EEEP_TX;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_EEEP_CR,
+ EEEP_CR_EEEP_TX);
}
static void rtl_set_eee_plus(struct r8152 *tp)
@@ -3045,14 +3099,10 @@ static void rtl_set_eee_plus(struct r8152 *tp)
static void rxdy_gated_en(struct r8152 *tp, bool enable)
{
- u32 ocp_data;
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MISC_1);
if (enable)
- ocp_data |= RXDY_GATED_EN;
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_MISC_1, RXDY_GATED_EN);
else
- ocp_data &= ~RXDY_GATED_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_MISC_1, RXDY_GATED_EN);
}
static int rtl_start_rx(struct r8152 *tp)
@@ -3140,24 +3190,16 @@ static int rtl_stop_rx(struct r8152 *tp)
static void rtl_set_ifg(struct r8152 *tp, u16 speed)
{
- u32 ocp_data;
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR1);
- ocp_data &= ~IFG_MASK;
if ((speed & (_10bps | _100bps)) && !(speed & FULL_DUP)) {
- ocp_data |= IFG_144NS;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR1, ocp_data);
+ ocp_word_w0w1(tp, MCU_TYPE_PLA, PLA_TCR1, IFG_MASK, IFG_144NS);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
- ocp_data &= ~TX10MIDLE_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4,
+ TX10MIDLE_EN);
} else {
- ocp_data |= IFG_96NS;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR1, ocp_data);
+ ocp_word_w0w1(tp, MCU_TYPE_PLA, PLA_TCR1, IFG_MASK, IFG_96NS);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
- ocp_data |= TX10MIDLE_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4,
+ TX10MIDLE_EN);
}
}
@@ -3169,13 +3211,9 @@ static inline void r8153b_rx_agg_chg_indicate(struct r8152 *tp)
static int rtl_enable(struct r8152 *tp)
{
- u32 ocp_data;
-
r8152b_reset_packet_filter(tp);
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CR);
- ocp_data |= CR_RE | CR_TE;
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, ocp_data);
+ ocp_byte_set_bits(tp, MCU_TYPE_PLA, PLA_CR, CR_RE | CR_TE);
switch (tp->version) {
case RTL_VER_01:
@@ -3283,8 +3321,6 @@ static void r8153_set_rx_early_size(struct r8152 *tp)
static int rtl8153_enable(struct r8152 *tp)
{
- u32 ocp_data;
-
if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
return -ENODEV;
@@ -3298,12 +3334,9 @@ static int rtl8153_enable(struct r8152 *tp)
switch (tp->version) {
case RTL_VER_09:
case RTL_VER_14:
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
- ocp_data &= ~FC_PATCH_TASK;
- ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_FW_TASK, FC_PATCH_TASK);
usleep_range(1000, 2000);
- ocp_data |= FC_PATCH_TASK;
- ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_USB, USB_FW_TASK, FC_PATCH_TASK);
break;
default:
break;
@@ -3322,9 +3355,7 @@ static void rtl_disable(struct r8152 *tp)
return;
}
- ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
- ocp_data &= ~RCR_ACPT_ALL;
- ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+ ocp_dword_clr_bits(tp, MCU_TYPE_PLA, PLA_RCR, RCR_ACPT_ALL);
rtl_drop_queued_tx(tp);
@@ -3357,24 +3388,17 @@ static void rtl_disable(struct r8152 *tp)
static void r8152_power_cut_en(struct r8152 *tp, bool enable)
{
- u32 ocp_data;
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CTRL);
if (enable)
- ocp_data |= POWER_CUT;
+ ocp_word_set_bits(tp, MCU_TYPE_USB, USB_UPS_CTRL, POWER_CUT);
else
- ocp_data &= ~POWER_CUT;
- ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CTRL, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_UPS_CTRL, POWER_CUT);
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS);
- ocp_data &= ~RESUME_INDICATE;
- ocp_write_word(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_PM_CTRL_STATUS,
+ RESUME_INDICATE);
}
static void rtl_rx_vlan_en(struct r8152 *tp, bool enable)
{
- u32 ocp_data;
-
switch (tp->version) {
case RTL_VER_01:
case RTL_VER_02:
@@ -3386,12 +3410,12 @@ static void rtl_rx_vlan_en(struct r8152 *tp, bool enable)
case RTL_VER_08:
case RTL_VER_09:
case RTL_VER_14:
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
if (enable)
- ocp_data |= CPCR_RX_VLAN;
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_CPCR,
+ CPCR_RX_VLAN);
else
- ocp_data &= ~CPCR_RX_VLAN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_CPCR,
+ CPCR_RX_VLAN);
break;
case RTL_TEST_01:
@@ -3401,12 +3425,12 @@ static void rtl_rx_vlan_en(struct r8152 *tp, bool enable)
case RTL_VER_13:
case RTL_VER_15:
default:
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RCR1);
if (enable)
- ocp_data |= OUTER_VLAN | INNER_VLAN;
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_RCR1,
+ OUTER_VLAN | INNER_VLAN);
else
- ocp_data &= ~(OUTER_VLAN | INNER_VLAN);
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_RCR1, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_RCR1,
+ OUTER_VLAN | INNER_VLAN);
break;
}
}
@@ -3467,33 +3491,33 @@ static u32 __rtl_get_wol(struct r8152 *tp)
static void __rtl_set_wol(struct r8152 *tp, u32 wolopts)
{
- u32 ocp_data;
+ u16 ocp_data;
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
- ocp_data &= ~LINK_ON_WAKE_EN;
if (wolopts & WAKE_PHY)
- ocp_data |= LINK_ON_WAKE_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_CONFIG34,
+ LINK_ON_WAKE_EN);
+ else
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_CONFIG34,
+ LINK_ON_WAKE_EN);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG5);
- ocp_data &= ~(UWF_EN | BWF_EN | MWF_EN);
+ ocp_data = 0;
if (wolopts & WAKE_UCAST)
ocp_data |= UWF_EN;
if (wolopts & WAKE_BCAST)
ocp_data |= BWF_EN;
if (wolopts & WAKE_MCAST)
ocp_data |= MWF_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG5, ocp_data);
+ ocp_word_w0w1(tp, MCU_TYPE_PLA, PLA_CONFIG5, UWF_EN | BWF_EN | MWF_EN,
+ ocp_data);
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL);
- ocp_data &= ~MAGIC_EN;
if (wolopts & WAKE_MAGIC)
- ocp_data |= MAGIC_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_CFG_WOL, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_CFG_WOL, MAGIC_EN);
+ else
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_CFG_WOL, MAGIC_EN);
if (wolopts & WAKE_ANY)
device_set_wakeup_enable(&tp->udev->dev, true);
@@ -3503,35 +3527,27 @@ static void __rtl_set_wol(struct r8152 *tp, u32 wolopts)
static void r8153_mac_clk_speed_down(struct r8152 *tp, bool enable)
{
- u32 ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2);
-
/* MAC clock speed down */
if (enable)
- ocp_data |= MAC_CLK_SPDWN_EN;
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2,
+ MAC_CLK_SPDWN_EN);
else
- ocp_data &= ~MAC_CLK_SPDWN_EN;
-
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2,
+ MAC_CLK_SPDWN_EN);
}
static void r8156_mac_clk_spd(struct r8152 *tp, bool enable)
{
- u32 ocp_data;
-
/* MAC clock speed down */
if (enable) {
/* aldps_spdwn_ratio, tp10_spdwn_ratio */
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL,
- 0x0403);
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, 0x0403);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2);
- ocp_data &= ~EEE_SPDWN_RATIO_MASK;
- ocp_data |= MAC_CLK_SPDWN_EN | 0x03; /* eee_spdwn_ratio */
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data);
+ ocp_word_w0w1(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2,
+ EEE_SPDWN_RATIO_MASK, MAC_CLK_SPDWN_EN | 0x03);
} else {
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2);
- ocp_data &= ~MAC_CLK_SPDWN_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2,
+ MAC_CLK_SPDWN_EN);
}
}
@@ -3549,27 +3565,20 @@ static void r8153_u1u2en(struct r8152 *tp, bool enable)
static void r8153b_u1u2en(struct r8152 *tp, bool enable)
{
- u32 ocp_data;
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_LPM_CONFIG);
if (enable)
- ocp_data |= LPM_U1U2_EN;
+ ocp_word_set_bits(tp, MCU_TYPE_USB, USB_LPM_CONFIG,
+ LPM_U1U2_EN);
else
- ocp_data &= ~LPM_U1U2_EN;
-
- ocp_write_word(tp, MCU_TYPE_USB, USB_LPM_CONFIG, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_LPM_CONFIG,
+ LPM_U1U2_EN);
}
static void r8153_u2p3en(struct r8152 *tp, bool enable)
{
- u32 ocp_data;
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL);
if (enable)
- ocp_data |= U2P3_ENABLE;
+ ocp_word_set_bits(tp, MCU_TYPE_USB, USB_U2P3_CTRL, U2P3_ENABLE);
else
- ocp_data &= ~U2P3_ENABLE;
- ocp_write_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_U2P3_CTRL, U2P3_ENABLE);
}
static void r8153b_ups_flags(struct r8152 *tp)
@@ -3784,24 +3793,20 @@ static u16 r8153_phy_status(struct r8152 *tp, u16 desired)
static void r8153b_ups_en(struct r8152 *tp, bool enable)
{
- u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_POWER_CUT);
-
if (enable) {
r8153b_ups_flags(tp);
- ocp_data |= UPS_EN | USP_PREWAKE | PHASE2_EN;
- ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+ ocp_byte_set_bits(tp, MCU_TYPE_USB, USB_POWER_CUT,
+ UPS_EN | USP_PREWAKE | PHASE2_EN);
- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
- ocp_data |= UPS_FORCE_PWR_DOWN;
- ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
+ ocp_byte_set_bits(tp, MCU_TYPE_USB, USB_MISC_2,
+ UPS_FORCE_PWR_DOWN);
} else {
- ocp_data &= ~(UPS_EN | USP_PREWAKE);
- ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+ ocp_byte_clr_bits(tp, MCU_TYPE_USB, USB_POWER_CUT,
+ UPS_EN | USP_PREWAKE);
- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
- ocp_data &= ~UPS_FORCE_PWR_DOWN;
- ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
+ ocp_byte_clr_bits(tp, MCU_TYPE_USB, USB_MISC_2,
+ UPS_FORCE_PWR_DOWN);
if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) {
int i;
@@ -3825,25 +3830,20 @@ static void r8153b_ups_en(struct r8152 *tp, bool enable)
static void r8153c_ups_en(struct r8152 *tp, bool enable)
{
- u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_POWER_CUT);
-
if (enable) {
r8153b_ups_flags(tp);
- ocp_data |= UPS_EN | USP_PREWAKE | PHASE2_EN;
- ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+ ocp_byte_set_bits(tp, MCU_TYPE_USB, USB_POWER_CUT,
+ UPS_EN | USP_PREWAKE | PHASE2_EN);
- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
- ocp_data |= UPS_FORCE_PWR_DOWN;
- ocp_data &= ~BIT(7);
- ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
+ ocp_byte_w0w1(tp, MCU_TYPE_USB, USB_MISC_2, BIT(7),
+ UPS_FORCE_PWR_DOWN);
} else {
- ocp_data &= ~(UPS_EN | USP_PREWAKE);
- ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+ ocp_byte_clr_bits(tp, MCU_TYPE_USB, USB_POWER_CUT,
+ UPS_EN | USP_PREWAKE);
- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
- ocp_data &= ~UPS_FORCE_PWR_DOWN;
- ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
+ ocp_byte_clr_bits(tp, MCU_TYPE_USB, USB_MISC_2,
+ UPS_FORCE_PWR_DOWN);
if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) {
int i;
@@ -3865,9 +3865,7 @@ static void r8153c_ups_en(struct r8152 *tp, bool enable)
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
- ocp_data |= BIT(8);
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_CONFIG34, BIT(8));
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
}
@@ -3875,35 +3873,30 @@ static void r8153c_ups_en(struct r8152 *tp, bool enable)
static void r8156_ups_en(struct r8152 *tp, bool enable)
{
- u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_POWER_CUT);
-
if (enable) {
r8156_ups_flags(tp);
- ocp_data |= UPS_EN | USP_PREWAKE | PHASE2_EN;
- ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+ ocp_byte_set_bits(tp, MCU_TYPE_USB, USB_POWER_CUT,
+ UPS_EN | USP_PREWAKE | PHASE2_EN);
- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
- ocp_data |= UPS_FORCE_PWR_DOWN;
- ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
+ ocp_byte_set_bits(tp, MCU_TYPE_USB, USB_MISC_2,
+ UPS_FORCE_PWR_DOWN);
switch (tp->version) {
case RTL_VER_13:
case RTL_VER_15:
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPHY_XTAL);
- ocp_data &= ~OOBS_POLLING;
- ocp_write_byte(tp, MCU_TYPE_USB, USB_UPHY_XTAL, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_UPHY_XTAL,
+ OOBS_POLLING);
break;
default:
break;
}
} else {
- ocp_data &= ~(UPS_EN | USP_PREWAKE);
- ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+ ocp_byte_clr_bits(tp, MCU_TYPE_USB, USB_POWER_CUT,
+ UPS_EN | USP_PREWAKE);
- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
- ocp_data &= ~UPS_FORCE_PWR_DOWN;
- ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
+ ocp_byte_clr_bits(tp, MCU_TYPE_USB, USB_MISC_2,
+ UPS_FORCE_PWR_DOWN);
if (ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0) & PCUT_STATUS) {
tp->rtl_ops.hw_phy_cfg(tp);
@@ -3916,54 +3909,38 @@ static void r8156_ups_en(struct r8152 *tp, bool enable)
static void r8153_power_cut_en(struct r8152 *tp, bool enable)
{
- u32 ocp_data;
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_POWER_CUT);
if (enable)
- ocp_data |= PWR_EN | PHASE2_EN;
+ ocp_word_set_bits(tp, MCU_TYPE_USB, USB_POWER_CUT,
+ PWR_EN | PHASE2_EN);
else
- ocp_data &= ~(PWR_EN | PHASE2_EN);
- ocp_write_word(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_POWER_CUT,
+ PWR_EN | PHASE2_EN);
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
- ocp_data &= ~PCUT_STATUS;
- ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_MISC_0, PCUT_STATUS);
}
static void r8153b_power_cut_en(struct r8152 *tp, bool enable)
{
- u32 ocp_data;
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_POWER_CUT);
if (enable)
- ocp_data |= PWR_EN | PHASE2_EN;
+ ocp_word_set_bits(tp, MCU_TYPE_USB, USB_POWER_CUT,
+ PWR_EN | PHASE2_EN);
else
- ocp_data &= ~PWR_EN;
- ocp_write_word(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_POWER_CUT, PWR_EN);
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
- ocp_data &= ~PCUT_STATUS;
- ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_MISC_0, PCUT_STATUS);
}
static void r8153_queue_wake(struct r8152 *tp, bool enable)
{
- u32 ocp_data;
-
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_INDICATE_FALG);
if (enable)
- ocp_data |= UPCOMING_RUNTIME_D3;
+ ocp_byte_set_bits(tp, MCU_TYPE_PLA, PLA_INDICATE_FALG,
+ UPCOMING_RUNTIME_D3);
else
- ocp_data &= ~UPCOMING_RUNTIME_D3;
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_INDICATE_FALG, ocp_data);
+ ocp_byte_clr_bits(tp, MCU_TYPE_PLA, PLA_INDICATE_FALG,
+ UPCOMING_RUNTIME_D3);
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_SUSPEND_FLAG);
- ocp_data &= ~LINK_CHG_EVENT;
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_SUSPEND_FLAG, ocp_data);
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
- ocp_data &= ~LINK_CHANGE_FLAG;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
+ ocp_byte_clr_bits(tp, MCU_TYPE_PLA, PLA_SUSPEND_FLAG, LINK_CHG_EVENT);
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, LINK_CHANGE_FLAG);
}
static bool rtl_can_wakeup(struct r8152 *tp)
@@ -3976,27 +3953,21 @@ static bool rtl_can_wakeup(struct r8152 *tp)
static void rtl_runtime_suspend_enable(struct r8152 *tp, bool enable)
{
if (enable) {
- u32 ocp_data;
-
__rtl_set_wol(tp, WAKE_ANY);
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
- ocp_data |= LINK_OFF_WAKE_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_CONFIG34,
+ LINK_OFF_WAKE_EN);
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
} else {
- u32 ocp_data;
-
__rtl_set_wol(tp, tp->saved_wolopts);
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
- ocp_data &= ~LINK_OFF_WAKE_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_CONFIG34,
+ LINK_OFF_WAKE_EN);
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
}
@@ -4077,8 +4048,6 @@ static void rtl8156_runtime_enable(struct r8152 *tp, bool enable)
static void r8153_teredo_off(struct r8152 *tp)
{
- u32 ocp_data;
-
switch (tp->version) {
case RTL_VER_01:
case RTL_VER_02:
@@ -4087,10 +4056,9 @@ static void r8153_teredo_off(struct r8152 *tp)
case RTL_VER_05:
case RTL_VER_06:
case RTL_VER_07:
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG);
- ocp_data &= ~(TEREDO_SEL | TEREDO_RS_EVENT_MASK |
- OOB_TEREDO_EN);
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG,
+ TEREDO_SEL | TEREDO_RS_EVENT_MASK |
+ OOB_TEREDO_EN);
break;
case RTL_VER_08:
@@ -4117,13 +4085,10 @@ static void r8153_teredo_off(struct r8152 *tp)
static void rtl_reset_bmu(struct r8152 *tp)
{
- u32 ocp_data;
-
- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_BMU_RESET);
- ocp_data &= ~(BMU_RESET_EP_IN | BMU_RESET_EP_OUT);
- ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
- ocp_data |= BMU_RESET_EP_IN | BMU_RESET_EP_OUT;
- ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_RESET, ocp_data);
+ ocp_byte_clr_bits(tp, MCU_TYPE_USB, USB_BMU_RESET,
+ BMU_RESET_EP_IN | BMU_RESET_EP_OUT);
+ ocp_byte_set_bits(tp, MCU_TYPE_USB, USB_BMU_RESET,
+ BMU_RESET_EP_IN | BMU_RESET_EP_OUT);
}
/* Clear the bp to stop the firmware before loading a new one */
@@ -4944,7 +4909,7 @@ static void rtl_ram_code_speed_up(struct r8152 *tp, struct fw_phy_speed_up *phy,
return;
while (len) {
- u32 ocp_data, size;
+ u32 size;
int i;
if (len < 2048)
@@ -4952,18 +4917,16 @@ static void rtl_ram_code_speed_up(struct r8152 *tp, struct fw_phy_speed_up *phy,
else
size = 2048;
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL);
- ocp_data |= GPHY_PATCH_DONE | BACKUP_RESTRORE;
- ocp_write_word(tp, MCU_TYPE_USB, USB_GPHY_CTRL, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_USB, USB_GPHY_CTRL,
+ GPHY_PATCH_DONE | BACKUP_RESTRORE);
generic_ocp_write(tp, __le16_to_cpu(phy->fw_reg), 0xff, size, data, MCU_TYPE_USB);
data += size;
len -= size;
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL);
- ocp_data |= POL_GPHY_PATCH;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL,
+ POL_GPHY_PATCH);
for (i = 0; i < 1000; i++) {
if (!(ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL) & POL_GPHY_PATCH))
@@ -5337,21 +5300,21 @@ static void r8152_mmd_write(struct r8152 *tp, u16 dev, u16 reg, u16 data)
static void r8152_eee_en(struct r8152 *tp, bool enable)
{
u16 config1, config2, config3;
- u32 ocp_data;
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
config1 = ocp_reg_read(tp, OCP_EEE_CONFIG1) & ~sd_rise_time_mask;
config2 = ocp_reg_read(tp, OCP_EEE_CONFIG2);
config3 = ocp_reg_read(tp, OCP_EEE_CONFIG3) & ~fast_snr_mask;
if (enable) {
- ocp_data |= EEE_RX_EN | EEE_TX_EN;
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_EEE_CR,
+ EEE_RX_EN | EEE_TX_EN);
config1 |= EEE_10_CAP | EEE_NWAY_EN | TX_QUIET_EN | RX_QUIET_EN;
config1 |= sd_rise_time(1);
config2 |= RG_DACQUIET_EN | RG_LDVQUIET_EN;
config3 |= fast_snr(42);
} else {
- ocp_data &= ~(EEE_RX_EN | EEE_TX_EN);
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_EEE_CR,
+ EEE_RX_EN | EEE_TX_EN);
config1 &= ~(EEE_10_CAP | EEE_NWAY_EN | TX_QUIET_EN |
RX_QUIET_EN);
config1 |= sd_rise_time(7);
@@ -5359,7 +5322,6 @@ static void r8152_eee_en(struct r8152 *tp, bool enable)
config3 |= fast_snr(511);
}
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data);
ocp_reg_write(tp, OCP_EEE_CONFIG1, config1);
ocp_reg_write(tp, OCP_EEE_CONFIG2, config2);
ocp_reg_write(tp, OCP_EEE_CONFIG3, config3);
@@ -5367,21 +5329,20 @@ static void r8152_eee_en(struct r8152 *tp, bool enable)
static void r8153_eee_en(struct r8152 *tp, bool enable)
{
- u32 ocp_data;
u16 config;
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
config = ocp_reg_read(tp, OCP_EEE_CFG);
if (enable) {
- ocp_data |= EEE_RX_EN | EEE_TX_EN;
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_EEE_CR,
+ EEE_RX_EN | EEE_TX_EN);
config |= EEE10_EN;
} else {
- ocp_data &= ~(EEE_RX_EN | EEE_TX_EN);
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_EEE_CR,
+ EEE_RX_EN | EEE_TX_EN);
config &= ~EEE10_EN;
}
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data);
ocp_reg_write(tp, OCP_EEE_CFG, config);
tp->ups_info.eee = enable;
@@ -5512,30 +5473,20 @@ static void r8156b_wait_loading_flash(struct r8152 *tp)
static void r8152b_exit_oob(struct r8152 *tp)
{
- u32 ocp_data;
-
- ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
- ocp_data &= ~RCR_ACPT_ALL;
- ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+ ocp_dword_clr_bits(tp, MCU_TYPE_PLA, PLA_RCR, RCR_ACPT_ALL);
rxdy_gated_en(tp, true);
r8153_teredo_off(tp);
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CR, 0x00);
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
- ocp_data &= ~NOW_IS_OOB;
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+ ocp_byte_clr_bits(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, NOW_IS_OOB);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
- ocp_data &= ~MCU_BORW_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, MCU_BORW_EN);
wait_oob_link_list_ready(tp);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
- ocp_data |= RE_INIT_LL;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, RE_INIT_LL);
wait_oob_link_list_ready(tp);
@@ -5571,18 +5522,12 @@ static void r8152b_exit_oob(struct r8152 *tp)
ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8152_RMS);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0);
- ocp_data |= TCR0_AUTO_FIFO;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR0, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_TCR0, TCR0_AUTO_FIFO);
}
static void r8152b_enter_oob(struct r8152 *tp)
{
- u32 ocp_data;
-
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
- ocp_data &= ~NOW_IS_OOB;
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+ ocp_byte_clr_bits(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, NOW_IS_OOB);
ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_OOB);
ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL1, RXFIFO_THR2_OOB);
@@ -5592,9 +5537,7 @@ static void r8152b_enter_oob(struct r8152 *tp)
wait_oob_link_list_ready(tp);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
- ocp_data |= RE_INIT_LL;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, RE_INIT_LL);
wait_oob_link_list_ready(tp);
@@ -5602,19 +5545,15 @@ static void r8152b_enter_oob(struct r8152 *tp)
rtl_rx_vlan_en(tp, true);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_BDC_CR);
- ocp_data |= ALDPS_PROXY_MODE;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_BDC_CR, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_BDC_CR, ALDPS_PROXY_MODE);
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
- ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB;
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+ ocp_byte_set_bits(tp, MCU_TYPE_PLA, PLA_OOB_CTRL,
+ NOW_IS_OOB | DIS_MCU_CLROOB);
rxdy_gated_en(tp, false);
- ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
- ocp_data |= RCR_APM | RCR_AM | RCR_AB;
- ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+ ocp_dword_set_bits(tp, MCU_TYPE_PLA, PLA_RCR,
+ RCR_APM | RCR_AM | RCR_AB);
}
static int r8153_pre_firmware_1(struct r8152 *tp)
@@ -5649,27 +5588,18 @@ static int r8153_post_firmware_1(struct r8152 *tp)
static int r8153_pre_firmware_2(struct r8152 *tp)
{
- u32 ocp_data;
-
r8153_pre_firmware_1(tp);
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0);
- ocp_data &= ~FW_FIX_SUSPEND;
- ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_FW_FIX_EN0, FW_FIX_SUSPEND);
return 0;
}
static int r8153_post_firmware_2(struct r8152 *tp)
{
- u32 ocp_data;
-
/* enable bp0 if support USB_SPEED_SUPER only */
- if (ocp_read_byte(tp, MCU_TYPE_USB, USB_CSTMR) & FORCE_SUPER) {
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_BP_EN);
- ocp_data |= BIT(0);
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_EN, ocp_data);
- }
+ if (ocp_read_byte(tp, MCU_TYPE_USB, USB_CSTMR) & FORCE_SUPER)
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_BP_EN, BIT(0));
/* reset UPHY timer to 36 ms */
ocp_write_word(tp, MCU_TYPE_PLA, PLA_UPHY_TIMER, 36000 / 16);
@@ -5677,28 +5607,20 @@ static int r8153_post_firmware_2(struct r8152 *tp)
/* enable U3P3 check, set the counter to 4 */
ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, U3P3_CHECK_EN | 4);
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0);
- ocp_data |= FW_FIX_SUSPEND;
- ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN0, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_USB, USB_FW_FIX_EN0, FW_FIX_SUSPEND);
- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_USB2PHY);
- ocp_data |= USB2PHY_L1 | USB2PHY_SUSPEND;
- ocp_write_byte(tp, MCU_TYPE_USB, USB_USB2PHY, ocp_data);
+ ocp_byte_set_bits(tp, MCU_TYPE_USB, USB_USB2PHY,
+ USB2PHY_L1 | USB2PHY_SUSPEND);
return 0;
}
static int r8153_post_firmware_3(struct r8152 *tp)
{
- u32 ocp_data;
-
- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_USB2PHY);
- ocp_data |= USB2PHY_L1 | USB2PHY_SUSPEND;
- ocp_write_byte(tp, MCU_TYPE_USB, USB_USB2PHY, ocp_data);
+ ocp_byte_set_bits(tp, MCU_TYPE_USB, USB_USB2PHY,
+ USB2PHY_L1 | USB2PHY_SUSPEND);
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1);
- ocp_data |= FW_IP_RESET_EN;
- ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_USB, USB_FW_FIX_EN1, FW_IP_RESET_EN);
return 0;
}
@@ -5718,49 +5640,30 @@ static int r8153b_post_firmware_1(struct r8152 *tp)
/* enable bp0 for RTL8153-BND */
ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_1);
- if (ocp_data & BND_MASK) {
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_BP_EN);
- ocp_data |= BIT(0);
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_BP_EN, ocp_data);
- }
+ if (ocp_data & BND_MASK)
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_BP_EN, BIT(0));
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_CTRL);
- ocp_data |= FLOW_CTRL_PATCH_OPT;
- ocp_write_word(tp, MCU_TYPE_USB, USB_FW_CTRL, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_USB, USB_FW_CTRL, FLOW_CTRL_PATCH_OPT);
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
- ocp_data |= FC_PATCH_TASK;
- ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_USB, USB_FW_TASK, FC_PATCH_TASK);
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1);
- ocp_data |= FW_IP_RESET_EN;
- ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_USB, USB_FW_FIX_EN1, FW_IP_RESET_EN);
return 0;
}
static int r8153c_post_firmware_1(struct r8152 *tp)
{
- u32 ocp_data;
+ ocp_word_set_bits(tp, MCU_TYPE_USB, USB_FW_CTRL, FLOW_CTRL_PATCH_2);
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_CTRL);
- ocp_data |= FLOW_CTRL_PATCH_2;
- ocp_write_word(tp, MCU_TYPE_USB, USB_FW_CTRL, ocp_data);
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
- ocp_data |= FC_PATCH_TASK;
- ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_USB, USB_FW_TASK, FC_PATCH_TASK);
return 0;
}
static int r8156a_post_firmware_1(struct r8152 *tp)
{
- u32 ocp_data;
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1);
- ocp_data |= FW_IP_RESET_EN;
- ocp_write_word(tp, MCU_TYPE_USB, USB_FW_FIX_EN1, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_USB, USB_FW_FIX_EN1, FW_IP_RESET_EN);
/* Modify U3PHY parameter for compatibility issue */
ocp_write_dword(tp, MCU_TYPE_USB, USB_UPHY3_MDCMDIO, 0x4026840e);
@@ -5796,7 +5699,6 @@ static void r8153_aldps_en(struct r8152 *tp, bool enable)
static void r8153_hw_phy_cfg(struct r8152 *tp)
{
- u32 ocp_data;
u16 data;
/* disable ALDPS before updating the PHY parameters */
@@ -5823,11 +5725,10 @@ static void r8153_hw_phy_cfg(struct r8152 *tp)
data = ocp_reg_read(tp, OCP_POWER_CFG);
data |= EN_10M_PLLOFF;
ocp_reg_write(tp, OCP_POWER_CFG, data);
+
sram_write(tp, SRAM_IMPEDANCE, 0x0b13);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
- ocp_data |= PFM_PWM_SWITCH;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_PHY_PWR, PFM_PWM_SWITCH);
/* Enable LPF corner auto tune */
sram_write(tp, SRAM_LPF_CFG, 0xf70f);
@@ -5873,11 +5774,7 @@ static void r8153b_hw_phy_cfg(struct r8152 *tp)
u32 ocp_data;
u16 data;
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
- if (ocp_data & PCUT_STATUS) {
- ocp_data &= ~PCUT_STATUS;
- ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
- }
+ ocp_word_test_and_clr_bits(tp, MCU_TYPE_USB, USB_MISC_0, PCUT_STATUS);
/* disable ALDPS before updating the PHY parameters */
r8153_aldps_en(tp, false);
@@ -5934,14 +5831,11 @@ static void r8153b_hw_phy_cfg(struct r8152 *tp)
u32 swr_cnt_1ms_ini;
swr_cnt_1ms_ini = (16000000 / ocp_data) & SAW_CNT_1MS_MASK;
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CFG);
- ocp_data = (ocp_data & ~SAW_CNT_1MS_MASK) | swr_cnt_1ms_ini;
- ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CFG, ocp_data);
+ ocp_word_w0w1(tp, MCU_TYPE_USB, USB_UPS_CFG, SAW_CNT_1MS_MASK,
+ swr_cnt_1ms_ini);
}
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
- ocp_data |= PFM_PWM_SWITCH;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_PHY_PWR, PFM_PWM_SWITCH);
/* Advnace EEE */
if (!rtl_phy_patch_request(tp, true, true)) {
@@ -5988,31 +5882,21 @@ static void rtl8153_change_mtu(struct r8152 *tp)
static void r8153_first_init(struct r8152 *tp)
{
- u32 ocp_data;
-
rxdy_gated_en(tp, true);
r8153_teredo_off(tp);
- ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
- ocp_data &= ~RCR_ACPT_ALL;
- ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+ ocp_dword_clr_bits(tp, MCU_TYPE_PLA, PLA_RCR, RCR_ACPT_ALL);
rtl8152_nic_reset(tp);
rtl_reset_bmu(tp);
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
- ocp_data &= ~NOW_IS_OOB;
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+ ocp_byte_clr_bits(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, NOW_IS_OOB);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
- ocp_data &= ~MCU_BORW_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, MCU_BORW_EN);
wait_oob_link_list_ready(tp);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
- ocp_data |= RE_INIT_LL;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, RE_INIT_LL);
wait_oob_link_list_ready(tp);
@@ -6020,9 +5904,7 @@ static void r8153_first_init(struct r8152 *tp)
rtl8153_change_mtu(tp);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0);
- ocp_data |= TCR0_AUTO_FIFO;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR0, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_TCR0, TCR0_AUTO_FIFO);
rtl8152_nic_reset(tp);
@@ -6036,11 +5918,7 @@ static void r8153_first_init(struct r8152 *tp)
static void r8153_enter_oob(struct r8152 *tp)
{
- u32 ocp_data;
-
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
- ocp_data &= ~NOW_IS_OOB;
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+ ocp_byte_clr_bits(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, NOW_IS_OOB);
/* RX FIFO settings for OOB */
ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RXFIFO_CTRL0, RXFIFO_THR1_OOB);
@@ -6052,9 +5930,7 @@ static void r8153_enter_oob(struct r8152 *tp)
wait_oob_link_list_ready(tp);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
- ocp_data |= RE_INIT_LL;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, RE_INIT_LL);
wait_oob_link_list_ready(tp);
@@ -6066,9 +5942,8 @@ static void r8153_enter_oob(struct r8152 *tp)
case RTL_VER_04:
case RTL_VER_05:
case RTL_VER_06:
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG);
- ocp_data &= ~TEREDO_WAKE_MASK;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG,
+ TEREDO_WAKE_MASK);
break;
case RTL_VER_08:
@@ -6087,23 +5962,17 @@ static void r8153_enter_oob(struct r8152 *tp)
rtl_rx_vlan_en(tp, true);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_BDC_CR);
- ocp_data |= ALDPS_PROXY_MODE;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_BDC_CR, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_BDC_CR, ALDPS_PROXY_MODE);
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
- ocp_data |= NOW_IS_OOB | DIS_MCU_CLROOB;
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+ ocp_byte_set_bits(tp, MCU_TYPE_PLA, PLA_OOB_CTRL,
+ NOW_IS_OOB | DIS_MCU_CLROOB);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
- ocp_data |= MCU_BORW_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, MCU_BORW_EN);
rxdy_gated_en(tp, false);
- ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
- ocp_data |= RCR_APM | RCR_AM | RCR_AB;
- ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+ ocp_dword_set_bits(tp, MCU_TYPE_PLA, PLA_RCR,
+ RCR_APM | RCR_AM | RCR_AB);
}
static void rtl8153_disable(struct r8152 *tp)
@@ -6135,7 +6004,6 @@ static void r8156_fc_parameter(struct r8152 *tp)
static int rtl8156_enable(struct r8152 *tp)
{
- u32 ocp_data;
u16 speed;
if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
@@ -6150,12 +6018,12 @@ static int rtl8156_enable(struct r8152 *tp)
speed = rtl8152_get_speed(tp);
rtl_set_ifg(tp, speed);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
if (speed & _2500bps)
- ocp_data &= ~IDLE_SPDWN_EN;
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4,
+ IDLE_SPDWN_EN);
else
- ocp_data |= IDLE_SPDWN_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4,
+ IDLE_SPDWN_EN);
if (speed & _1000bps)
ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_TXTWSYS, 0x11);
@@ -6164,21 +6032,15 @@ static int rtl8156_enable(struct r8152 *tp)
if (tp->udev->speed == USB_SPEED_HIGH) {
/* USB 0xb45e[3:0] l1_nyet_hird */
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_L1_CTRL);
- ocp_data &= ~0xf;
if (is_flow_control(speed))
- ocp_data |= 0xf;
+ ocp_word_w0w1(tp, MCU_TYPE_USB, USB_L1_CTRL, 0xf, 0xf);
else
- ocp_data |= 0x1;
- ocp_write_word(tp, MCU_TYPE_USB, USB_L1_CTRL, ocp_data);
+ ocp_word_w0w1(tp, MCU_TYPE_USB, USB_L1_CTRL, 0xf, 0x1);
}
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
- ocp_data &= ~FC_PATCH_TASK;
- ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_FW_TASK, FC_PATCH_TASK);
usleep_range(1000, 2000);
- ocp_data |= FC_PATCH_TASK;
- ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_USB, USB_FW_TASK, FC_PATCH_TASK);
return rtl_enable(tp);
}
@@ -6193,7 +6055,6 @@ static void rtl8156_disable(struct r8152 *tp)
static int rtl8156b_enable(struct r8152 *tp)
{
- u32 ocp_data;
u16 speed;
if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
@@ -6202,9 +6063,7 @@ static int rtl8156b_enable(struct r8152 *tp)
set_tx_qlen(tp);
rtl_set_eee_plus(tp);
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_RX_AGGR_NUM);
- ocp_data &= ~RX_AGGR_NUM_MASK;
- ocp_write_word(tp, MCU_TYPE_USB, USB_RX_AGGR_NUM, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_RX_AGGR_NUM, RX_AGGR_NUM_MASK);
r8153_set_rx_early_timeout(tp);
r8153_set_rx_early_size(tp);
@@ -6212,29 +6071,23 @@ static int rtl8156b_enable(struct r8152 *tp)
speed = rtl8152_get_speed(tp);
rtl_set_ifg(tp, speed);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
if (speed & _2500bps)
- ocp_data &= ~IDLE_SPDWN_EN;
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4,
+ IDLE_SPDWN_EN);
else
- ocp_data |= IDLE_SPDWN_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4,
+ IDLE_SPDWN_EN);
if (tp->udev->speed == USB_SPEED_HIGH) {
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_L1_CTRL);
- ocp_data &= ~0xf;
if (is_flow_control(speed))
- ocp_data |= 0xf;
+ ocp_word_w0w1(tp, MCU_TYPE_USB, USB_L1_CTRL, 0xf, 0xf);
else
- ocp_data |= 0x1;
- ocp_write_word(tp, MCU_TYPE_USB, USB_L1_CTRL, ocp_data);
+ ocp_word_w0w1(tp, MCU_TYPE_USB, USB_L1_CTRL, 0xf, 0x1);
}
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
- ocp_data &= ~FC_PATCH_TASK;
- ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_FW_TASK, FC_PATCH_TASK);
usleep_range(1000, 2000);
- ocp_data |= FC_PATCH_TASK;
- ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_USB, USB_FW_TASK, FC_PATCH_TASK);
return rtl_enable(tp);
}
@@ -6405,8 +6258,6 @@ static void rtl8152_down(struct r8152 *tp)
static void rtl8153_up(struct r8152 *tp)
{
- u32 ocp_data;
-
if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
return;
@@ -6415,17 +6266,11 @@ static void rtl8153_up(struct r8152 *tp)
r8153_aldps_en(tp, false);
r8153_first_init(tp);
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6);
- ocp_data |= LANWAKE_CLR_EN;
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6, ocp_data);
+ ocp_byte_set_bits(tp, MCU_TYPE_PLA, PLA_CONFIG6, LANWAKE_CLR_EN);
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG);
- ocp_data &= ~LANWAKE_PIN;
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG, ocp_data);
+ ocp_byte_clr_bits(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG, LANWAKE_PIN);
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_SSPHYLINK1);
- ocp_data &= ~DELAY_PHY_PWR_CHG;
- ocp_write_word(tp, MCU_TYPE_USB, USB_SSPHYLINK1, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_SSPHYLINK1, DELAY_PHY_PWR_CHG);
r8153_aldps_en(tp, true);
@@ -6445,16 +6290,12 @@ static void rtl8153_up(struct r8152 *tp)
static void rtl8153_down(struct r8152 *tp)
{
- u32 ocp_data;
-
if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) {
rtl_drop_queued_tx(tp);
return;
}
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6);
- ocp_data &= ~LANWAKE_CLR_EN;
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6, ocp_data);
+ ocp_byte_clr_bits(tp, MCU_TYPE_PLA, PLA_CONFIG6, LANWAKE_CLR_EN);
r8153_u1u2en(tp, false);
r8153_u2p3en(tp, false);
@@ -6466,8 +6307,6 @@ static void rtl8153_down(struct r8152 *tp)
static void rtl8153b_up(struct r8152 *tp)
{
- u32 ocp_data;
-
if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
return;
@@ -6478,9 +6317,8 @@ static void rtl8153b_up(struct r8152 *tp)
r8153_first_init(tp);
ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_B);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
- ocp_data &= ~PLA_MCU_SPDWN_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3,
+ PLA_MCU_SPDWN_EN);
r8153_aldps_en(tp, true);
@@ -6490,16 +6328,13 @@ static void rtl8153b_up(struct r8152 *tp)
static void rtl8153b_down(struct r8152 *tp)
{
- u32 ocp_data;
-
if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) {
rtl_drop_queued_tx(tp);
return;
}
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
- ocp_data |= PLA_MCU_SPDWN_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3,
+ PLA_MCU_SPDWN_EN);
r8153b_u1u2en(tp, false);
r8153_u2p3en(tp, false);
@@ -6527,8 +6362,6 @@ static void rtl8153c_change_mtu(struct r8152 *tp)
static void rtl8153c_up(struct r8152 *tp)
{
- u32 ocp_data;
-
if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
return;
@@ -6539,26 +6372,18 @@ static void rtl8153c_up(struct r8152 *tp)
rxdy_gated_en(tp, true);
r8153_teredo_off(tp);
- ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
- ocp_data &= ~RCR_ACPT_ALL;
- ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+ ocp_dword_clr_bits(tp, MCU_TYPE_PLA, PLA_RCR, RCR_ACPT_ALL);
rtl8152_nic_reset(tp);
rtl_reset_bmu(tp);
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
- ocp_data &= ~NOW_IS_OOB;
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+ ocp_byte_clr_bits(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, NOW_IS_OOB);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
- ocp_data &= ~MCU_BORW_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, MCU_BORW_EN);
wait_oob_link_list_ready(tp);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
- ocp_data |= RE_INIT_LL;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, RE_INIT_LL);
wait_oob_link_list_ready(tp);
@@ -6578,15 +6403,12 @@ static void rtl8153c_up(struct r8152 *tp)
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG34);
- ocp_data |= BIT(8);
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG34, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_CONFIG34, BIT(8));
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_NORAML);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
- ocp_data &= ~PLA_MCU_SPDWN_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3,
+ PLA_MCU_SPDWN_EN);
r8153_aldps_en(tp, true);
r8153b_u1u2en(tp, true);
@@ -6608,8 +6430,6 @@ static void rtl8156_change_mtu(struct r8152 *tp)
static void rtl8156_up(struct r8152 *tp)
{
- u32 ocp_data;
-
if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
return;
@@ -6620,20 +6440,14 @@ static void rtl8156_up(struct r8152 *tp)
rxdy_gated_en(tp, true);
r8153_teredo_off(tp);
- ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
- ocp_data &= ~RCR_ACPT_ALL;
- ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+ ocp_dword_clr_bits(tp, MCU_TYPE_PLA, PLA_RCR, RCR_ACPT_ALL);
rtl8152_nic_reset(tp);
rtl_reset_bmu(tp);
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
- ocp_data &= ~NOW_IS_OOB;
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+ ocp_byte_clr_bits(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, NOW_IS_OOB);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
- ocp_data &= ~MCU_BORW_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, MCU_BORW_EN);
rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX);
@@ -6643,27 +6457,21 @@ static void rtl8156_up(struct r8152 *tp)
case RTL_TEST_01:
case RTL_VER_10:
case RTL_VER_11:
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_BMU_CONFIG);
- ocp_data |= ACT_ODMA;
- ocp_write_word(tp, MCU_TYPE_USB, USB_BMU_CONFIG, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_USB, USB_BMU_CONFIG, ACT_ODMA);
break;
default:
break;
}
/* share FIFO settings */
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_FULL);
- ocp_data &= ~RXFIFO_FULL_MASK;
- ocp_data |= 0x08;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_FULL, ocp_data);
+ ocp_word_w0w1(tp, MCU_TYPE_PLA, PLA_RXFIFO_FULL, RXFIFO_FULL_MASK,
+ 0x08);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
- ocp_data &= ~PLA_MCU_SPDWN_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3,
+ PLA_MCU_SPDWN_EN);
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION);
- ocp_data &= ~(RG_PWRDN_EN | ALL_SPEED_OFF);
- ocp_write_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_SPEED_OPTION,
+ RG_PWRDN_EN | ALL_SPEED_OFF);
ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, 0x00600400);
@@ -6681,25 +6489,20 @@ static void rtl8156_up(struct r8152 *tp)
static void rtl8156_down(struct r8152 *tp)
{
- u32 ocp_data;
-
if (test_bit(RTL8152_INACCESSIBLE, &tp->flags)) {
rtl_drop_queued_tx(tp);
return;
}
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
- ocp_data |= PLA_MCU_SPDWN_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3,
+ PLA_MCU_SPDWN_EN);
r8153b_u1u2en(tp, false);
r8153_u2p3en(tp, false);
r8153b_power_cut_en(tp, false);
r8153_aldps_en(tp, false);
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
- ocp_data &= ~NOW_IS_OOB;
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+ ocp_byte_clr_bits(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, NOW_IS_OOB);
/* RX FIFO settings for OOB */
ocp_write_word(tp, MCU_TYPE_PLA, PLA_RXFIFO_FULL, 64 / 16);
@@ -6718,20 +6521,15 @@ static void rtl8156_down(struct r8152 *tp)
*/
ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_WAKE_BASE, 0x00ff);
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL);
- ocp_data |= NOW_IS_OOB;
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, ocp_data);
+ ocp_byte_set_bits(tp, MCU_TYPE_PLA, PLA_OOB_CTRL, NOW_IS_OOB);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7);
- ocp_data |= MCU_BORW_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_SFF_STS_7, MCU_BORW_EN);
rtl_rx_vlan_en(tp, true);
rxdy_gated_en(tp, false);
- ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_RCR);
- ocp_data |= RCR_APM | RCR_AM | RCR_AB;
- ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+ ocp_dword_set_bits(tp, MCU_TYPE_PLA, PLA_RCR,
+ RCR_APM | RCR_AM | RCR_AB);
r8153_aldps_en(tp, true);
}
@@ -7008,11 +6806,7 @@ static int rtl8152_close(struct net_device *netdev)
static void rtl_tally_reset(struct r8152 *tp)
{
- u32 ocp_data;
-
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY);
- ocp_data |= TALLY_RESET;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_RSTTALLY, TALLY_RESET);
}
static void r8152b_init(struct r8152 *tp)
@@ -7031,21 +6825,18 @@ static void r8152b_init(struct r8152 *tp)
r8152_aldps_en(tp, false);
- if (tp->version == RTL_VER_01) {
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE);
- ocp_data &= ~LED_MODE_MASK;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data);
- }
+ if (tp->version == RTL_VER_01)
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_LED_FEATURE,
+ LED_MODE_MASK);
r8152_power_cut_en(tp, false);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
- ocp_data |= TX_10M_IDLE_EN | PFM_PWM_SWITCH;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
- ocp_data = ocp_read_dword(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL);
- ocp_data &= ~MCU_CLK_RATIO_MASK;
- ocp_data |= MCU_CLK_RATIO | D3_CLK_GATED_EN;
- ocp_write_dword(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_PHY_PWR,
+ TX_10M_IDLE_EN | PFM_PWM_SWITCH);
+
+ ocp_dword_w0w1(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL, MCU_CLK_RATIO_MASK,
+ MCU_CLK_RATIO | D3_CLK_GATED_EN);
+
ocp_data = GPHY_STS_MSK | SPEED_DOWN_MSK |
SPDWN_RXDV_MSK | SPDWN_LINKCHG_MSK;
ocp_write_word(tp, MCU_TYPE_PLA, PLA_GPHY_INTR_IMR, ocp_data);
@@ -7053,9 +6844,8 @@ static void r8152b_init(struct r8152 *tp)
rtl_tally_reset(tp);
/* enable rx aggregation */
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
- ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
- ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_USB_CTRL,
+ RX_AGG_DISABLE | RX_ZERO_EN);
}
static void r8153_init(struct r8152 *tp)
@@ -7096,55 +6886,43 @@ static void r8153_init(struct r8152 *tp)
r8153_u2p3en(tp, false);
if (tp->version == RTL_VER_04) {
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_SSPHYLINK2);
- ocp_data &= ~pwd_dn_scale_mask;
- ocp_data |= pwd_dn_scale(96);
- ocp_write_word(tp, MCU_TYPE_USB, USB_SSPHYLINK2, ocp_data);
-
- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_USB2PHY);
- ocp_data |= USB2PHY_L1 | USB2PHY_SUSPEND;
- ocp_write_byte(tp, MCU_TYPE_USB, USB_USB2PHY, ocp_data);
+ ocp_word_w0w1(tp, MCU_TYPE_USB, USB_SSPHYLINK2,
+ pwd_dn_scale_mask, pwd_dn_scale(96));
+
+ ocp_byte_set_bits(tp, MCU_TYPE_USB, USB_USB2PHY,
+ USB2PHY_L1 | USB2PHY_SUSPEND);
} else if (tp->version == RTL_VER_05) {
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_DMY_REG0);
- ocp_data &= ~ECM_ALDPS;
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_DMY_REG0, ocp_data);
+ ocp_byte_clr_bits(tp, MCU_TYPE_PLA, PLA_DMY_REG0, ECM_ALDPS);
- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY1);
if (ocp_read_word(tp, MCU_TYPE_USB, USB_BURST_SIZE) == 0)
- ocp_data &= ~DYNAMIC_BURST;
+ ocp_byte_clr_bits(tp, MCU_TYPE_USB, USB_CSR_DUMMY1,
+ DYNAMIC_BURST);
else
- ocp_data |= DYNAMIC_BURST;
- ocp_write_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY1, ocp_data);
+ ocp_byte_set_bits(tp, MCU_TYPE_USB, USB_CSR_DUMMY1,
+ DYNAMIC_BURST);
} else if (tp->version == RTL_VER_06) {
- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY1);
if (ocp_read_word(tp, MCU_TYPE_USB, USB_BURST_SIZE) == 0)
- ocp_data &= ~DYNAMIC_BURST;
+ ocp_byte_clr_bits(tp, MCU_TYPE_USB, USB_CSR_DUMMY1,
+ DYNAMIC_BURST);
else
- ocp_data |= DYNAMIC_BURST;
- ocp_write_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY1, ocp_data);
+ ocp_byte_set_bits(tp, MCU_TYPE_USB, USB_CSR_DUMMY1,
+ DYNAMIC_BURST);
r8153_queue_wake(tp, false);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
if (rtl8152_get_speed(tp) & LINK_STATUS)
- ocp_data |= CUR_LINK_OK;
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS,
+ CUR_LINK_OK | POLL_LINK_CHG);
else
- ocp_data &= ~CUR_LINK_OK;
- ocp_data |= POLL_LINK_CHG;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
+ ocp_word_w0w1(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS,
+ CUR_LINK_OK, POLL_LINK_CHG);
}
- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY2);
- ocp_data |= EP4_FULL_FC;
- ocp_write_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY2, ocp_data);
+ ocp_byte_set_bits(tp, MCU_TYPE_USB, USB_CSR_DUMMY2, EP4_FULL_FC);
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_WDT11_CTRL);
- ocp_data &= ~TIMER11_EN;
- ocp_write_word(tp, MCU_TYPE_USB, USB_WDT11_CTRL, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_WDT11_CTRL, TIMER11_EN);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE);
- ocp_data &= ~LED_MODE_MASK;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_LED_FEATURE, LED_MODE_MASK);
ocp_data = FIFO_EMPTY_1FB | ROK_EXIT_LPM;
if (tp->version == RTL_VER_04 && tp->udev->speed < USB_SPEED_SUPER)
@@ -7153,10 +6931,8 @@ static void r8153_init(struct r8152 *tp)
ocp_data |= LPM_TIMER_500US;
ocp_write_byte(tp, MCU_TYPE_USB, USB_LPM_CTRL, ocp_data);
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_AFE_CTRL2);
- ocp_data &= ~SEN_VAL_MASK;
- ocp_data |= SEN_VAL_NORMAL | SEL_RXIDLE;
- ocp_write_word(tp, MCU_TYPE_USB, USB_AFE_CTRL2, ocp_data);
+ ocp_word_w0w1(tp, MCU_TYPE_USB, USB_AFE_CTRL2, SEN_VAL_MASK,
+ SEN_VAL_NORMAL | SEL_RXIDLE);
ocp_write_word(tp, MCU_TYPE_USB, USB_CONNECT_TIMER, 0x0001);
@@ -7166,21 +6942,17 @@ static void r8153_init(struct r8152 *tp)
r8153_u1u2en(tp, true);
usb_enable_lpm(tp->udev);
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6);
- ocp_data |= LANWAKE_CLR_EN;
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CONFIG6, ocp_data);
+ ocp_byte_set_bits(tp, MCU_TYPE_PLA, PLA_CONFIG6, LANWAKE_CLR_EN);
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG);
- ocp_data &= ~LANWAKE_PIN;
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG, ocp_data);
+ ocp_byte_clr_bits(tp, MCU_TYPE_PLA, PLA_LWAKE_CTRL_REG, LANWAKE_PIN);
/* rx aggregation */
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
- ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
- if (tp->dell_tb_rx_agg_bug)
- ocp_data |= RX_AGG_DISABLE;
+ ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_USB_CTRL,
+ RX_AGG_DISABLE | RX_ZERO_EN);
- ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
+ if (tp->dell_tb_rx_agg_bug)
+ ocp_word_set_bits(tp, MCU_TYPE_USB, USB_USB_CTRL,
+ RX_AGG_DISABLE);
rtl_tally_reset(tp);
@@ -7200,7 +6972,6 @@ static void r8153_init(struct r8152 *tp)
static void r8153b_init(struct r8152 *tp)
{
- u32 ocp_data;
u16 data;
int i;
@@ -7239,13 +7010,12 @@ static void r8153b_init(struct r8152 *tp)
r8153_queue_wake(tp, false);
rtl_runtime_suspend_enable(tp, false);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
if (rtl8152_get_speed(tp) & LINK_STATUS)
- ocp_data |= CUR_LINK_OK;
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS,
+ CUR_LINK_OK | POLL_LINK_CHG);
else
- ocp_data &= ~CUR_LINK_OK;
- ocp_data |= POLL_LINK_CHG;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
+ ocp_word_w0w1(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, CUR_LINK_OK,
+ POLL_LINK_CHG);
if (tp->udev->speed >= USB_SPEED_SUPER)
r8153b_u1u2en(tp, true);
@@ -7255,25 +7025,20 @@ static void r8153b_init(struct r8152 *tp)
/* MAC clock speed down */
r8153_mac_clk_speed_down(tp, true);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
- ocp_data &= ~PLA_MCU_SPDWN_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3,
+ PLA_MCU_SPDWN_EN);
- if (tp->version == RTL_VER_09) {
+ if (tp->version == RTL_VER_09)
/* Disable Test IO for 32QFN */
- if (ocp_read_byte(tp, MCU_TYPE_PLA, 0xdc00) & BIT(5)) {
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
- ocp_data |= TEST_IO_OFF;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
- }
- }
+ if (ocp_read_byte(tp, MCU_TYPE_PLA, 0xdc00) & BIT(5))
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_PHY_PWR,
+ TEST_IO_OFF);
set_bit(GREEN_ETHERNET, &tp->flags);
/* rx aggregation */
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
- ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
- ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_USB_CTRL,
+ RX_AGG_DISABLE | RX_ZERO_EN);
rtl_tally_reset(tp);
@@ -7282,7 +7047,6 @@ static void r8153b_init(struct r8152 *tp)
static void r8153c_init(struct r8152 *tp)
{
- u32 ocp_data;
u16 data;
int i;
@@ -7293,12 +7057,10 @@ static void r8153c_init(struct r8152 *tp)
/* Disable spi_en */
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_CRWECR, CRWECR_CONFIG);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CONFIG5);
- ocp_data &= ~BIT(3);
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_CONFIG5, ocp_data);
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, 0xcbf0);
- ocp_data |= BIT(1);
- ocp_write_word(tp, MCU_TYPE_USB, 0xcbf0, ocp_data);
+
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_CONFIG5, BIT(3));
+
+ ocp_word_set_bits(tp, MCU_TYPE_USB, 0xcbf0, BIT(1));
for (i = 0; i < 500; i++) {
if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
@@ -7330,14 +7092,12 @@ static void r8153c_init(struct r8152 *tp)
r8153_queue_wake(tp, false);
rtl_runtime_suspend_enable(tp, false);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
if (rtl8152_get_speed(tp) & LINK_STATUS)
- ocp_data |= CUR_LINK_OK;
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS,
+ CUR_LINK_OK | POLL_LINK_CHG);
else
- ocp_data &= ~CUR_LINK_OK;
-
- ocp_data |= POLL_LINK_CHG;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
+ ocp_word_w0w1(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, CUR_LINK_OK,
+ POLL_LINK_CHG);
r8153b_u1u2en(tp, true);
@@ -7346,16 +7106,13 @@ static void r8153c_init(struct r8152 *tp)
/* MAC clock speed down */
r8153_mac_clk_speed_down(tp, true);
- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_2);
- ocp_data &= ~BIT(7);
- ocp_write_byte(tp, MCU_TYPE_USB, USB_MISC_2, ocp_data);
+ ocp_byte_clr_bits(tp, MCU_TYPE_USB, USB_MISC_2, BIT(7));
set_bit(GREEN_ETHERNET, &tp->flags);
/* rx aggregation */
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
- ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
- ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_USB_CTRL,
+ RX_AGG_DISABLE | RX_ZERO_EN);
rtl_tally_reset(tp);
@@ -7364,14 +7121,9 @@ static void r8153c_init(struct r8152 *tp)
static void r8156_hw_phy_cfg(struct r8152 *tp)
{
- u32 ocp_data;
u16 data;
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
- if (ocp_data & PCUT_STATUS) {
- ocp_data &= ~PCUT_STATUS;
- ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
- }
+ ocp_word_test_and_clr_bits(tp, MCU_TYPE_USB, USB_MISC_0, PCUT_STATUS);
data = r8153_phy_status(tp, 0);
switch (data) {
@@ -7398,9 +7150,7 @@ static void r8156_hw_phy_cfg(struct r8152 *tp)
data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
WARN_ON_ONCE(data != PHY_STAT_LAN_ON);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
- ocp_data |= PFM_PWM_SWITCH;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_PHY_PWR, PFM_PWM_SWITCH);
switch (tp->version) {
case RTL_VER_10:
@@ -7561,9 +7311,8 @@ static void r8156_hw_phy_cfg(struct r8152 *tp)
/* EEE parameter */
ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_TXTWSYS_2P5G, 0x0056);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_USB_CFG);
- ocp_data |= EN_XG_LIP | EN_G_LIP;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_USB_CFG, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_USB_CFG,
+ EN_XG_LIP | EN_G_LIP);
sram_write(tp, 0x8257, 0x020f); /* XG PLL */
sram_write(tp, 0x80ea, 0x7843); /* GIGA Master */
@@ -7572,9 +7321,8 @@ static void r8156_hw_phy_cfg(struct r8152 *tp)
return;
/* Advance EEE */
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
- ocp_data |= EEE_SPDWN_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4,
+ EEE_SPDWN_EN);
data = ocp_reg_read(tp, OCP_DOWN_SPEED);
data &= ~(EN_EEE_100 | EN_EEE_1000);
@@ -7714,7 +7462,6 @@ static void r8156_hw_phy_cfg(struct r8152 *tp)
static void r8156b_hw_phy_cfg(struct r8152 *tp)
{
- u32 ocp_data;
u16 data;
switch (tp->version) {
@@ -7744,11 +7491,7 @@ static void r8156b_hw_phy_cfg(struct r8152 *tp)
break;
}
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
- if (ocp_data & PCUT_STATUS) {
- ocp_data &= ~PCUT_STATUS;
- ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
- }
+ ocp_word_test_and_clr_bits(tp, MCU_TYPE_USB, USB_MISC_0, PCUT_STATUS);
data = r8153_phy_status(tp, 0);
switch (data) {
@@ -7785,9 +7528,7 @@ static void r8156b_hw_phy_cfg(struct r8152 *tp)
data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
WARN_ON_ONCE(data != PHY_STAT_LAN_ON);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
- ocp_data |= PFM_PWM_SWITCH;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_PHY_PWR, PFM_PWM_SWITCH);
switch (tp->version) {
case RTL_VER_12:
@@ -7874,9 +7615,9 @@ static void r8156b_hw_phy_cfg(struct r8152 *tp)
ocp_reg_write(tp, 0xb87c, 0x8fd8);
ocp_reg_write(tp, 0xb87e, 0xf600);
- ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, PLA_USB_CFG);
- ocp_data |= EN_XG_LIP | EN_G_LIP;
- ocp_write_byte(tp, MCU_TYPE_PLA, PLA_USB_CFG, ocp_data);
+ ocp_byte_set_bits(tp, MCU_TYPE_PLA, PLA_USB_CFG,
+ EN_XG_LIP | EN_G_LIP);
+
ocp_reg_write(tp, 0xb87c, 0x813d);
ocp_reg_write(tp, 0xb87e, 0x390e);
ocp_reg_write(tp, 0xb87c, 0x814f);
@@ -8090,9 +7831,7 @@ static void r8156b_hw_phy_cfg(struct r8152 *tp)
if (rtl_phy_patch_request(tp, true, true))
return;
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
- ocp_data |= EEE_SPDWN_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, EEE_SPDWN_EN);
data = ocp_reg_read(tp, OCP_DOWN_SPEED);
data &= ~(EN_EEE_100 | EN_EEE_1000);
@@ -8131,22 +7870,17 @@ static void r8156b_hw_phy_cfg(struct r8152 *tp)
static void r8156_init(struct r8152 *tp)
{
- u32 ocp_data;
u16 data;
int i;
if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
return;
- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_ECM_OP);
- ocp_data &= ~EN_ALL_SPEED;
- ocp_write_byte(tp, MCU_TYPE_USB, USB_ECM_OP, ocp_data);
+ ocp_byte_clr_bits(tp, MCU_TYPE_USB, USB_ECM_OP, EN_ALL_SPEED);
ocp_write_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION, 0);
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_ECM_OPTION);
- ocp_data |= BYPASS_MAC_RESET;
- ocp_write_word(tp, MCU_TYPE_USB, USB_ECM_OPTION, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_USB, USB_ECM_OPTION, BYPASS_MAC_RESET);
r8153b_u1u2en(tp, false);
@@ -8196,28 +7930,23 @@ static void r8156_init(struct r8152 *tp)
r8156_mac_clk_spd(tp, true);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
- ocp_data &= ~PLA_MCU_SPDWN_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3,
+ PLA_MCU_SPDWN_EN);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
if (rtl8152_get_speed(tp) & LINK_STATUS)
- ocp_data |= CUR_LINK_OK;
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS,
+ CUR_LINK_OK | POLL_LINK_CHG);
else
- ocp_data &= ~CUR_LINK_OK;
- ocp_data |= POLL_LINK_CHG;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
+ ocp_word_w0w1(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, CUR_LINK_OK,
+ POLL_LINK_CHG);
set_bit(GREEN_ETHERNET, &tp->flags);
/* rx aggregation */
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
- ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
- ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_USB_CTRL,
+ RX_AGG_DISABLE | RX_ZERO_EN);
- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_BMU_CONFIG);
- ocp_data |= ACT_ODMA;
- ocp_write_byte(tp, MCU_TYPE_USB, USB_BMU_CONFIG, ocp_data);
+ ocp_byte_set_bits(tp, MCU_TYPE_USB, USB_BMU_CONFIG, ACT_ODMA);
r8156_mdio_force_mode(tp);
rtl_tally_reset(tp);
@@ -8227,26 +7956,19 @@ static void r8156_init(struct r8152 *tp)
static void r8156b_init(struct r8152 *tp)
{
- u32 ocp_data;
u16 data;
int i;
if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
return;
- ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_ECM_OP);
- ocp_data &= ~EN_ALL_SPEED;
- ocp_write_byte(tp, MCU_TYPE_USB, USB_ECM_OP, ocp_data);
+ ocp_byte_clr_bits(tp, MCU_TYPE_USB, USB_ECM_OP, EN_ALL_SPEED);
ocp_write_word(tp, MCU_TYPE_USB, USB_SPEED_OPTION, 0);
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_ECM_OPTION);
- ocp_data |= BYPASS_MAC_RESET;
- ocp_write_word(tp, MCU_TYPE_USB, USB_ECM_OPTION, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_USB, USB_ECM_OPTION, BYPASS_MAC_RESET);
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL);
- ocp_data |= RX_DETECT8;
- ocp_write_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_USB, USB_U2P3_CTRL, RX_DETECT8);
r8153b_u1u2en(tp, false);
@@ -8306,48 +8028,39 @@ static void r8156b_init(struct r8152 *tp)
usb_enable_lpm(tp->udev);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_RCR);
- ocp_data &= ~SLOT_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_RCR, SLOT_EN);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_CPCR);
- ocp_data |= FLOW_CTRL_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_CPCR, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_CPCR, FLOW_CTRL_EN);
/* enable fc timer and set timer to 600 ms. */
ocp_write_word(tp, MCU_TYPE_USB, USB_FC_TIMER,
CTRL_TIMER_EN | (600 / 8));
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_CTRL);
if (!(ocp_read_word(tp, MCU_TYPE_PLA, PLA_POL_GPIO_CTRL) & DACK_DET_EN))
- ocp_data |= FLOW_CTRL_PATCH_2;
- ocp_data &= ~AUTO_SPEEDUP;
- ocp_write_word(tp, MCU_TYPE_USB, USB_FW_CTRL, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_USB, USB_FW_CTRL,
+ FLOW_CTRL_PATCH_2);
+
+ ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_FW_CTRL, AUTO_SPEEDUP);
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_FW_TASK);
- ocp_data |= FC_PATCH_TASK;
- ocp_write_word(tp, MCU_TYPE_USB, USB_FW_TASK, ocp_data);
+ ocp_word_set_bits(tp, MCU_TYPE_USB, USB_FW_TASK, FC_PATCH_TASK);
r8156_mac_clk_spd(tp, true);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3);
- ocp_data &= ~PLA_MCU_SPDWN_EN;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL3,
+ PLA_MCU_SPDWN_EN);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
if (rtl8152_get_speed(tp) & LINK_STATUS)
- ocp_data |= CUR_LINK_OK;
+ ocp_word_set_bits(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS,
+ CUR_LINK_OK | POLL_LINK_CHG);
else
- ocp_data &= ~CUR_LINK_OK;
- ocp_data |= POLL_LINK_CHG;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
+ ocp_word_w0w1(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, CUR_LINK_OK,
+ POLL_LINK_CHG);
set_bit(GREEN_ETHERNET, &tp->flags);
/* rx aggregation */
- ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
- ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
- ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
+ ocp_word_clr_bits(tp, MCU_TYPE_USB, USB_USB_CTRL,
+ RX_AGG_DISABLE | RX_ZERO_EN);
r8156_mdio_force_mode(tp);
rtl_tally_reset(tp);
--
2.34.1
next prev parent reply other threads:[~2026-03-23 8:24 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-23 8:22 [PATCH net-next v3 0/2] r8152: add helper functions for PLA/USB/PHY OCP registers Chih Kai Hsu
2026-03-23 8:22 ` Chih Kai Hsu [this message]
2026-03-24 6:04 ` [PATCH net-next v3 1/2] r8152: add helper functions for PLA/USB " Hayes Wang
2026-03-25 3:00 ` Chih Kai Hsu
2026-03-24 18:05 ` Simon Horman
2026-03-25 3:35 ` Chih Kai Hsu
2026-03-25 16:44 ` Simon Horman
2026-03-23 8:22 ` [PATCH net-next v3 2/2] r8152: add helper functions for PHY " Chih Kai Hsu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260323082226.2601-451-nic_swsd@realtek.com \
--to=hsu.chih.kai@realtek.com \
--cc=bjorn@mork.no \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nic_swsd@realtek.com \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox