[PATCH net-next 2/5] net: stmmac: dwmac-socfpga: Use the socfpga_sgmii_config() helper

[Maxime Chevallier <maxime.chevallier@bootlin.com>]

Use the existing socfpga_sgmii_config() helper in
socfpga_dwmac_fix_mac_speed(), instead of re-coding the register access.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
index 42da73b92ceb..ed6448c0ad2a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -95,8 +95,7 @@ static void socfpga_dwmac_fix_mac_speed(void *bsp_priv,
 	u32 val;
 
 	if (sgmii_adapter_base)
-		writew(SGMII_ADAPTER_DISABLE,
-		       sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG);
+		socfpga_sgmii_config(dwmac, false);
 
 	if (splitter_base) {
 		val = readl(splitter_base + EMAC_SPLITTER_CTRL_REG);
@@ -121,8 +120,7 @@ static void socfpga_dwmac_fix_mac_speed(void *bsp_priv,
 	if ((priv->plat->phy_interface == PHY_INTERFACE_MODE_SGMII ||
 	     priv->plat->phy_interface == PHY_INTERFACE_MODE_1000BASEX) &&
 	     sgmii_adapter_base)
-		writew(SGMII_ADAPTER_ENABLE,
-		       sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG);
+		socfpga_sgmii_config(dwmac, true);
 }
 
 static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device *dev)
-- 
2.49.0