From: hawk@kernel.org
To: netdev@vger.kernel.org
Cc: hawk@kernel.org, andrew+netdev@lunn.ch, davem@davemloft.net,
edumazet@google.com, kuba@kernel.org, pabeni@redhat.com,
horms@kernel.org, jhs@mojatatu.com, jiri@resnulli.us,
j.koeppeler@tu-berlin.de, kernel-team@cloudflare.com
Subject: [PATCH net-next 1/5] net: add dev->bql flag to allow BQL sysfs for IFF_NO_QUEUE devices
Date: Tue, 24 Mar 2026 18:47:00 +0100 [thread overview]
Message-ID: <20260324174719.1224337-3-hawk@kernel.org> (raw)
In-Reply-To: <20260324174719.1224337-1-hawk@kernel.org>
From: Jesper Dangaard Brouer <hawk@kernel.org>
Virtual devices with IFF_NO_QUEUE or lltx are excluded from BQL sysfs
by netdev_uses_bql(), since they traditionally lack real hardware
queues. However, some virtual devices like veth implement a real
ptr_ring FIFO with NAPI processing and benefit from BQL to limit
in-flight bytes and reduce latency.
Add a per-device 'bql' bitfield boolean in the priv_flags_slow section
of struct net_device. When set, it overrides the IFF_NO_QUEUE/lltx
exclusion and exposes BQL sysfs entries (/sys/class/net/<dev>/queues/
tx-<n>/byte_queue_limits/). The flag is still gated on CONFIG_BQL.
This allows drivers that use BQL despite being IFF_NO_QUEUE to opt in
to sysfs visibility for monitoring and debugging.
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Tested-by: Jonas Köppeler <j.koeppeler@tu-berlin.de>
---
Documentation/networking/net_cachelines/net_device.rst | 1 +
include/linux/netdevice.h | 1 +
net/core/net-sysfs.c | 8 +++++++-
3 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/Documentation/networking/net_cachelines/net_device.rst b/Documentation/networking/net_cachelines/net_device.rst
index 1c19bb7705df..b775d3235a2d 100644
--- a/Documentation/networking/net_cachelines/net_device.rst
+++ b/Documentation/networking/net_cachelines/net_device.rst
@@ -170,6 +170,7 @@ unsigned_long:1 see_all_hwtstamp_requests
unsigned_long:1 change_proto_down
unsigned_long:1 netns_immutable
unsigned_long:1 fcoe_mtu
+unsigned_long:1 bql netdev_uses_bql(net-sysfs.c)
struct list_head net_notifier_list
struct macsec_ops* macsec_ops
struct udp_tunnel_nic_info* udp_tunnel_nic_info
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 67e25f6d15a4..09e8c4dc16a0 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2463,6 +2463,7 @@ struct net_device {
unsigned long change_proto_down:1;
unsigned long netns_immutable:1;
unsigned long fcoe_mtu:1;
+ unsigned long bql:1;
struct list_head net_notifier_list;
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 2ce011fae249..b57f76b7e578 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -1945,10 +1945,16 @@ static const struct kobj_type netdev_queue_ktype = {
static bool netdev_uses_bql(const struct net_device *dev)
{
+ if (!IS_ENABLED(CONFIG_BQL))
+ return false;
+
+ if (dev->bql)
+ return true;
+
if (dev->lltx || (dev->priv_flags & IFF_NO_QUEUE))
return false;
- return IS_ENABLED(CONFIG_BQL);
+ return true;
}
static int netdev_queue_add_kobject(struct net_device *dev, int index)
--
2.43.0
next prev parent reply other threads:[~2026-03-24 17:47 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-24 17:46 [PATCH net-next 0/5] veth: add Byte Queue Limits (BQL) support hawk
2026-03-24 17:46 ` [PATCH " hawk
2026-03-24 17:56 ` Jesper Dangaard Brouer
2026-03-24 17:47 ` hawk [this message]
2026-03-24 17:47 ` [PATCH net-next 2/5] veth: implement Byte Queue Limits (BQL) for latency reduction hawk
2026-03-24 17:47 ` [PATCH net-next 3/5] veth: add tx_timeout watchdog as BQL safety net hawk
2026-03-24 17:47 ` [PATCH net-next 4/5] net: sched: add timeout count to NETDEV WATCHDOG message hawk
2026-03-24 17:47 ` [PATCH net-next 5/5] selftests: net: add veth BQL stress test hawk
2026-03-26 12:19 ` Jesper Dangaard Brouer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260324174719.1224337-3-hawk@kernel.org \
--to=hawk@kernel.org \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=j.koeppeler@tu-berlin.de \
--cc=jhs@mojatatu.com \
--cc=jiri@resnulli.us \
--cc=kernel-team@cloudflare.com \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox