From: Ivan Vecera <ivecera@redhat.com>
To: netdev@vger.kernel.org
Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev>,
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>,
Jiri Pirko <jiri@resnulli.us>, Jonathan Corbet <corbet@lwn.net>,
Shuah Khan <skhan@linuxfoundation.org>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Simon Horman <horms@kernel.org>,
Donald Hunter <donald.hunter@gmail.com>,
Prathosh Satish <Prathosh.Satish@microchip.com>,
Petr Oros <poros@redhat.com>,
linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH net-next 2/3] dpll: add actual frequency monitoring callback ops
Date: Wed, 25 Mar 2026 20:39:13 +0100 [thread overview]
Message-ID: <20260325193914.124898-3-ivecera@redhat.com> (raw)
In-Reply-To: <20260325193914.124898-1-ivecera@redhat.com>
Add new callback operations for a dpll device:
- freq_monitor_get(..) - to obtain current state of frequency monitor
feature from dpll device,
- freq_monitor_set(..) - to allow feature configuration.
Add new callback operation for a dpll pin:
- actual_freq_get(..) - to obtain the actual (measured) frequency in Hz.
Obtain the feature state value using the get callback and provide it to
the user if the device driver implements callbacks. The actual_freq_get
pin callback is only invoked when the frequency monitor is enabled.
Execute the set callback upon user requests.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
---
drivers/dpll/dpll_netlink.c | 90 +++++++++++++++++++++++++++++++++++++
include/linux/dpll.h | 12 +++++
2 files changed, 102 insertions(+)
diff --git a/drivers/dpll/dpll_netlink.c b/drivers/dpll/dpll_netlink.c
index 83cbd64abf5a4..6fe4ae38cff62 100644
--- a/drivers/dpll/dpll_netlink.c
+++ b/drivers/dpll/dpll_netlink.c
@@ -175,6 +175,26 @@ dpll_msg_add_phase_offset_monitor(struct sk_buff *msg, struct dpll_device *dpll,
return 0;
}
+static int
+dpll_msg_add_freq_monitor(struct sk_buff *msg, struct dpll_device *dpll,
+ struct netlink_ext_ack *extack)
+{
+ const struct dpll_device_ops *ops = dpll_device_ops(dpll);
+ enum dpll_feature_state state;
+ int ret;
+
+ if (ops->freq_monitor_set && ops->freq_monitor_get) {
+ ret = ops->freq_monitor_get(dpll, dpll_priv(dpll),
+ &state, extack);
+ if (ret)
+ return ret;
+ if (nla_put_u32(msg, DPLL_A_FREQUENCY_MONITOR, state))
+ return -EMSGSIZE;
+ }
+
+ return 0;
+}
+
static int
dpll_msg_add_phase_offset_avg_factor(struct sk_buff *msg,
struct dpll_device *dpll,
@@ -400,6 +420,38 @@ static int dpll_msg_add_ffo(struct sk_buff *msg, struct dpll_pin *pin,
ffo);
}
+static int dpll_msg_add_actual_freq(struct sk_buff *msg, struct dpll_pin *pin,
+ struct dpll_pin_ref *ref,
+ struct netlink_ext_ack *extack)
+{
+ const struct dpll_device_ops *dev_ops = dpll_device_ops(ref->dpll);
+ const struct dpll_pin_ops *ops = dpll_pin_ops(ref);
+ struct dpll_device *dpll = ref->dpll;
+ enum dpll_feature_state state;
+ u64 actual_freq;
+ int ret;
+
+ if (!ops->actual_freq_get)
+ return 0;
+ if (dev_ops->freq_monitor_get) {
+ ret = dev_ops->freq_monitor_get(dpll, dpll_priv(dpll),
+ &state, extack);
+ if (ret)
+ return ret;
+ if (state == DPLL_FEATURE_STATE_DISABLE)
+ return 0;
+ }
+ ret = ops->actual_freq_get(pin, dpll_pin_on_dpll_priv(dpll, pin),
+ dpll, dpll_priv(dpll), &actual_freq, extack);
+ if (ret)
+ return ret;
+ if (nla_put_64bit(msg, DPLL_A_PIN_ACTUAL_FREQUENCY,
+ sizeof(actual_freq), &actual_freq, DPLL_A_PIN_PAD))
+ return -EMSGSIZE;
+
+ return 0;
+}
+
static int
dpll_msg_add_pin_freq(struct sk_buff *msg, struct dpll_pin *pin,
struct dpll_pin_ref *ref, struct netlink_ext_ack *extack)
@@ -670,6 +722,9 @@ dpll_cmd_pin_get_one(struct sk_buff *msg, struct dpll_pin *pin,
if (ret)
return ret;
ret = dpll_msg_add_ffo(msg, pin, ref, extack);
+ if (ret)
+ return ret;
+ ret = dpll_msg_add_actual_freq(msg, pin, ref, extack);
if (ret)
return ret;
ret = dpll_msg_add_pin_esync(msg, pin, ref, extack);
@@ -722,6 +777,9 @@ dpll_device_get_one(struct dpll_device *dpll, struct sk_buff *msg,
if (ret)
return ret;
ret = dpll_msg_add_phase_offset_avg_factor(msg, dpll, extack);
+ if (ret)
+ return ret;
+ ret = dpll_msg_add_freq_monitor(msg, dpll, extack);
if (ret)
return ret;
@@ -948,6 +1006,32 @@ dpll_phase_offset_avg_factor_set(struct dpll_device *dpll, struct nlattr *a,
extack);
}
+static int
+dpll_freq_monitor_set(struct dpll_device *dpll, struct nlattr *a,
+ struct netlink_ext_ack *extack)
+{
+ const struct dpll_device_ops *ops = dpll_device_ops(dpll);
+ enum dpll_feature_state state = nla_get_u32(a), old_state;
+ int ret;
+
+ if (!(ops->freq_monitor_set && ops->freq_monitor_get)) {
+ NL_SET_ERR_MSG_ATTR(extack, a,
+ "dpll device not capable of frequency monitor");
+ return -EOPNOTSUPP;
+ }
+ ret = ops->freq_monitor_get(dpll, dpll_priv(dpll), &old_state,
+ extack);
+ if (ret) {
+ NL_SET_ERR_MSG(extack,
+ "unable to get current state of frequency monitor");
+ return ret;
+ }
+ if (state == old_state)
+ return 0;
+
+ return ops->freq_monitor_set(dpll, dpll_priv(dpll), state, extack);
+}
+
static int
dpll_pin_freq_set(struct dpll_pin *pin, struct nlattr *a,
struct netlink_ext_ack *extack)
@@ -1878,6 +1962,12 @@ dpll_set_from_nlattr(struct dpll_device *dpll, struct genl_info *info)
if (ret)
return ret;
break;
+ case DPLL_A_FREQUENCY_MONITOR:
+ ret = dpll_freq_monitor_set(dpll, a,
+ info->extack);
+ if (ret)
+ return ret;
+ break;
}
}
diff --git a/include/linux/dpll.h b/include/linux/dpll.h
index 2ce295b46b8cd..d14cdc2a37f62 100644
--- a/include/linux/dpll.h
+++ b/include/linux/dpll.h
@@ -52,6 +52,14 @@ struct dpll_device_ops {
int (*phase_offset_avg_factor_get)(const struct dpll_device *dpll,
void *dpll_priv, u32 *factor,
struct netlink_ext_ack *extack);
+ int (*freq_monitor_set)(const struct dpll_device *dpll,
+ void *dpll_priv,
+ enum dpll_feature_state state,
+ struct netlink_ext_ack *extack);
+ int (*freq_monitor_get)(const struct dpll_device *dpll,
+ void *dpll_priv,
+ enum dpll_feature_state *state,
+ struct netlink_ext_ack *extack);
};
struct dpll_pin_ops {
@@ -110,6 +118,10 @@ struct dpll_pin_ops {
int (*ffo_get)(const struct dpll_pin *pin, void *pin_priv,
const struct dpll_device *dpll, void *dpll_priv,
s64 *ffo, struct netlink_ext_ack *extack);
+ int (*actual_freq_get)(const struct dpll_pin *pin, void *pin_priv,
+ const struct dpll_device *dpll, void *dpll_priv,
+ u64 *actual_freq,
+ struct netlink_ext_ack *extack);
int (*esync_set)(const struct dpll_pin *pin, void *pin_priv,
const struct dpll_device *dpll, void *dpll_priv,
u64 freq, struct netlink_ext_ack *extack);
--
2.52.0
next prev parent reply other threads:[~2026-03-25 19:39 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-25 19:39 [PATCH net-next 0/3] dpll: add actual frequency monitoring feature Ivan Vecera
2026-03-25 19:39 ` [PATCH net-next 1/3] dpll: add actual frequency monitoring to netlink spec Ivan Vecera
2026-03-26 11:06 ` Vadim Fedorenko
2026-03-26 17:41 ` Ivan Vecera
2026-03-25 19:39 ` Ivan Vecera [this message]
2026-03-26 11:21 ` [PATCH net-next 2/3] dpll: add actual frequency monitoring callback ops Vadim Fedorenko
2026-03-26 17:48 ` Ivan Vecera
2026-03-25 19:39 ` [PATCH net-next 3/3] dpll: zl3073x: implement actual frequency monitoring Ivan Vecera
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260325193914.124898-3-ivecera@redhat.com \
--to=ivecera@redhat.com \
--cc=Prathosh.Satish@microchip.com \
--cc=arkadiusz.kubalewski@intel.com \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=donald.hunter@gmail.com \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=jiri@resnulli.us \
--cc=kuba@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=poros@redhat.com \
--cc=skhan@linuxfoundation.org \
--cc=vadim.fedorenko@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox