[PATCH net-next v6 03/11] net: ngbe: remove redundant macros

[Jiawen Wu <jiawenwu@trustnetic.com>]

NGBE_NCSI_SUP and NGBE_NCSI_MASK are duplicate-defined, they can be
replaced by the macros defined in libwx. Just remove them.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Joe Damato <joe@dama.to>
---
 drivers/net/ethernet/wangxun/ngbe/ngbe_main.c | 4 ++--
 drivers/net/ethernet/wangxun/ngbe/ngbe_type.h | 3 ---
 2 files changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c b/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c
index e28ddf684a06..8c9d505721b1 100644
--- a/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c
+++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c
@@ -57,7 +57,7 @@ static void ngbe_init_type_code(struct wx *wx)
 
 	wx->mac.type = wx_mac_em;
 	type_mask = (u16)(wx->subsystem_device_id & NGBE_OEM_MASK);
-	ncsi_mask = wx->subsystem_device_id & NGBE_NCSI_MASK;
+	ncsi_mask = wx->subsystem_device_id & WX_NCSI_MASK;
 	wol_mask = wx->subsystem_device_id & WX_WOL_MASK;
 
 	val = rd32(wx, WX_CFG_PORT_ST);
@@ -66,7 +66,7 @@ static void ngbe_init_type_code(struct wx *wx)
 		       em_mac_type_mdi;
 
 	wx->wol_hw_supported = (wol_mask == WX_WOL_SUP) ? 1 : 0;
-	wx->ncsi_enabled = (ncsi_mask == NGBE_NCSI_MASK ||
+	wx->ncsi_enabled = (ncsi_mask == WX_NCSI_SUP ||
 			   type_mask == NGBE_SUBID_OCP_CARD) ? 1 : 0;
 
 	switch (type_mask) {
diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h b/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h
index f1957fa0add4..7077a0da4c98 100644
--- a/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h
+++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h
@@ -37,9 +37,6 @@
 
 #define NGBE_OEM_MASK				0x00FF
 
-#define NGBE_NCSI_SUP				0x8000
-#define NGBE_NCSI_MASK				0x8000
-
 /**************** EM Registers ****************************/
 /* chip control Registers */
 #define NGBE_MIS_PRB_CTL			0x10010
-- 
2.48.1