* [PATCH v3 net-next 01/14] dt-bindings: net: dsa: update the description of 'dsa,member' property
2026-03-26 6:29 [PATCH v3 net-next 00/14] Add preliminary NETC switch support for i.MX94 Wei Fang
@ 2026-03-26 6:29 ` Wei Fang
2026-03-26 6:29 ` [PATCH v3 net-next 02/14] dt-bindings: net: dsa: add NETC switch Wei Fang
` (12 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Wei Fang @ 2026-03-26 6:29 UTC (permalink / raw)
To: claudiu.manoil, vladimir.oltean, xiaoning.wang, andrew+netdev,
davem, edumazet, kuba, pabeni, robh, krzk+dt, conor+dt,
f.fainelli, frank.li, chleroy, horms, linux, andrew
Cc: netdev, linux-kernel, devicetree, linuxppc-dev, linux-arm-kernel,
imx
The current description indicates that the 'dsa,member' property cannot
be set for a switch that is not part of any cluster. Vladimir thinks
that this is a case where the actual technical limitation was poorly
transposed into words when this restriction was first documented, in
commit 8c5ad1d6179d ("net: dsa: Document new binding").
The true technical limitation is that many DSA tagging protocols are
topology-unaware, and always call dsa_conduit_find_user() with a
switch_id of 0. Specifying a custom "dsa,member" property with a
non-zero switch_id would break them.
Therefore, for topology-aware switches, it is fine to specify this
property for them, even if they are not part of any cluster. Our NETC
switch is a good example which is topology-aware, the switch_id is
carried in the switch tag, but the switch_id 0 is reserved for VEPA
switch and cannot be used, so we need to use this property to assign
a non-zero switch_id for it.
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
---
Documentation/devicetree/bindings/net/dsa/dsa.yaml | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
index 2abd036578d1..801e1411e5c2 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
@@ -28,7 +28,11 @@ properties:
A two element list indicates which DSA cluster, and position within the
cluster a switch takes. <0 0> is cluster 0, switch 0. <0 1> is cluster 0,
switch 1. <1 0> is cluster 1, switch 0. A switch not part of any cluster
- (single device hanging off a CPU port) must not specify this property
+ (single device hanging off a CPU port) does not usually need to specify
+ this property, and then it becomes cluster 0, switch 0. For a topology
+ aware switch, its switch index can be specified through this property,
+ even if it is not part of any cluster. Also, topology-unaware switches
+ must always be defined as index 0 of their cluster.
$ref: /schemas/types.yaml#/definitions/uint32-array
additionalProperties: true
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v3 net-next 02/14] dt-bindings: net: dsa: add NETC switch
2026-03-26 6:29 [PATCH v3 net-next 00/14] Add preliminary NETC switch support for i.MX94 Wei Fang
2026-03-26 6:29 ` [PATCH v3 net-next 01/14] dt-bindings: net: dsa: update the description of 'dsa,member' property Wei Fang
@ 2026-03-26 6:29 ` Wei Fang
2026-03-26 20:06 ` Frank Li
2026-03-26 6:29 ` [PATCH v3 net-next 03/14] net: enetc: add pre-boot initialization for i.MX94 switch Wei Fang
` (11 subsequent siblings)
13 siblings, 1 reply; 16+ messages in thread
From: Wei Fang @ 2026-03-26 6:29 UTC (permalink / raw)
To: claudiu.manoil, vladimir.oltean, xiaoning.wang, andrew+netdev,
davem, edumazet, kuba, pabeni, robh, krzk+dt, conor+dt,
f.fainelli, frank.li, chleroy, horms, linux, andrew
Cc: netdev, linux-kernel, devicetree, linuxppc-dev, linux-arm-kernel,
imx
Add bindings for NETC switch. This switch is a PCIe function of NETC IP,
it supports advanced QoS with 8 traffic classes and 4 drop resilience
levels, and a full range of TSN standards capabilities. The switch CPU
port connects to an internal ENETC port, which is also a PCIe function
of NETC IP. So these two ports use a light-weight "pseudo MAC" instead
of a back-to-back MAC, because the "pseudo MAC" provides the delineation
between switch and ENETC, this translates to lower power (less logic and
memory) and lower delay (as there is no serialization delay across this
link).
Signed-off-by: Wei Fang <wei.fang@nxp.com>
---
.../bindings/net/dsa/nxp,netc-switch.yaml | 130 ++++++++++++++++++
1 file changed, 130 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/dsa/nxp,netc-switch.yaml
diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,netc-switch.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,netc-switch.yaml
new file mode 100644
index 000000000000..e34a4e3504c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/nxp,netc-switch.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/nxp,netc-switch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NETC Switch family
+
+description:
+ The NETC presents itself as a multi-function PCIe Root Complex Integrated
+ Endpoint (RCiEP) and provides full 802.1Q Ethernet switch functionality,
+ advanced QoS with 8 traffic classes and 4 drop resilience levels, and a
+ full range of TSN standards capabilities.
+
+ The CPU port of the switch connects to an internal ENETC. The switch and
+ the internal ENETC are fully integrated into the NETC IP, a back-to-back
+ MAC is not required. Instead, a light-weight "pseudo MAC" provides the
+ delineation between the switch and ENETC. This translates to lower power
+ (less logic and memory) and lower delay (as there is no serialization
+ delay across this link).
+
+maintainers:
+ - Wei Fang <wei.fang@nxp.com>
+
+properties:
+ compatible:
+ enum:
+ - pci1131,eef2
+
+ reg:
+ maxItems: 1
+
+ dsa,member:
+ description:
+ The property indicates DSA cluster and switch index. For NETC switch,
+ the valid range of the switch index is 1 ~ 7, the index is reflected
+ in the switch tag as an indication of the switch ID where the frame
+ originated. The value 0 is reserved for ENETC VEPA switch, whose ID
+ is hardwired to zero.
+
+$ref: dsa.yaml#
+
+patternProperties:
+ "^(ethernet-)?ports$":
+ type: object
+ additionalProperties: true
+ patternProperties:
+ "^(ethernet-)?port@[0-9a-f]$":
+ type: object
+
+ $ref: dsa-port.yaml#
+
+ properties:
+ clocks:
+ items:
+ - description: MAC transmit/receive reference clock.
+
+ clock-names:
+ items:
+ - const: ref
+
+ mdio:
+ $ref: /schemas/net/mdio.yaml#
+ unevaluatedProperties: false
+ description:
+ Optional child node for switch port, otherwise use NETC EMDIO.
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - dsa,member
+
+allOf:
+ - $ref: /schemas/pci/pci-device.yaml
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ pcie {
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ethernet-switch@0,2 {
+ compatible = "pci1131,eef2";
+ reg = <0x200 0 0 0 0>;
+ dsa,member = <0 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_switch>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ phy-handle = <ðphy0>;
+ phy-mode = "mii";
+ };
+
+ port@1 {
+ reg = <1>;
+ phy-handle = <ðphy1>;
+ phy-mode = "mii";
+ };
+
+ port@2 {
+ reg = <2>;
+ clocks = <&scmi_clk 103>;
+ clock-names = "ref";
+ phy-handle = <ðphy2>;
+ phy-mode = "rgmii-id";
+ };
+
+ port@3 {
+ reg = <3>;
+ ethernet = <&enetc3>;
+ phy-mode = "internal";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+ };
+ };
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PATCH v3 net-next 02/14] dt-bindings: net: dsa: add NETC switch
2026-03-26 6:29 ` [PATCH v3 net-next 02/14] dt-bindings: net: dsa: add NETC switch Wei Fang
@ 2026-03-26 20:06 ` Frank Li
0 siblings, 0 replies; 16+ messages in thread
From: Frank Li @ 2026-03-26 20:06 UTC (permalink / raw)
To: Wei Fang
Cc: claudiu.manoil, vladimir.oltean, xiaoning.wang, andrew+netdev,
davem, edumazet, kuba, pabeni, robh, krzk+dt, conor+dt,
f.fainelli, chleroy, horms, linux, andrew, netdev, linux-kernel,
devicetree, linuxppc-dev, linux-arm-kernel, imx
On Thu, Mar 26, 2026 at 02:29:05PM +0800, Wei Fang wrote:
> Add bindings for NETC switch. This switch is a PCIe function of NETC IP,
> it supports advanced QoS with 8 traffic classes and 4 drop resilience
> levels, and a full range of TSN standards capabilities. The switch CPU
Nit: double space before TSN.
> port connects to an internal ENETC port, which is also a PCIe function
> of NETC IP. So these two ports use a light-weight "pseudo MAC" instead
> of a back-to-back MAC, because the "pseudo MAC" provides the delineation
> between switch and ENETC, this translates to lower power (less logic and
what's means "this translates", do you means
"this help reduce power and latency."
> memory) and lower delay (as there is no serialization delay across this
> link).
>
> Signed-off-by: Wei Fang <wei.fang@nxp.com>
> ---
> .../bindings/net/dsa/nxp,netc-switch.yaml | 130 ++++++++++++++++++
> 1 file changed, 130 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/dsa/nxp,netc-switch.yaml
>
> diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,netc-switch.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,netc-switch.yaml
> new file mode 100644
> index 000000000000..e34a4e3504c3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/dsa/nxp,netc-switch.yaml
> @@ -0,0 +1,130 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/dsa/nxp,netc-switch.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NETC Switch family
> +
> +description:
Nit use ">" for multi paragraph.
others look good
Reviewed-by: Frank Li <Frank.Li@nxp.com>
> + The NETC presents itself as a multi-function PCIe Root Complex Integrated
> + Endpoint (RCiEP) and provides full 802.1Q Ethernet switch functionality,
> + advanced QoS with 8 traffic classes and 4 drop resilience levels, and a
> + full range of TSN standards capabilities.
> +
> + The CPU port of the switch connects to an internal ENETC. The switch and
> + the internal ENETC are fully integrated into the NETC IP, a back-to-back
> + MAC is not required. Instead, a light-weight "pseudo MAC" provides the
> + delineation between the switch and ENETC. This translates to lower power
> + (less logic and memory) and lower delay (as there is no serialization
> + delay across this link).
> +
> +maintainers:
> + - Wei Fang <wei.fang@nxp.com>
> +
> +properties:
> + compatible:
> + enum:
> + - pci1131,eef2
> +
> + reg:
> + maxItems: 1
> +
> + dsa,member:
> + description:
> + The property indicates DSA cluster and switch index. For NETC switch,
> + the valid range of the switch index is 1 ~ 7, the index is reflected
> + in the switch tag as an indication of the switch ID where the frame
> + originated. The value 0 is reserved for ENETC VEPA switch, whose ID
> + is hardwired to zero.
> +
> +$ref: dsa.yaml#
> +
> +patternProperties:
> + "^(ethernet-)?ports$":
> + type: object
> + additionalProperties: true
> + patternProperties:
> + "^(ethernet-)?port@[0-9a-f]$":
> + type: object
> +
> + $ref: dsa-port.yaml#
> +
> + properties:
> + clocks:
> + items:
> + - description: MAC transmit/receive reference clock.
> +
> + clock-names:
> + items:
> + - const: ref
> +
> + mdio:
> + $ref: /schemas/net/mdio.yaml#
> + unevaluatedProperties: false
> + description:
> + Optional child node for switch port, otherwise use NETC EMDIO.
> +
> + unevaluatedProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - dsa,member
> +
> +allOf:
> + - $ref: /schemas/pci/pci-device.yaml
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + pcie {
> + #address-cells = <3>;
> + #size-cells = <2>;
> +
> + ethernet-switch@0,2 {
> + compatible = "pci1131,eef2";
> + reg = <0x200 0 0 0 0>;
> + dsa,member = <0 1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_switch>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + phy-handle = <ðphy0>;
> + phy-mode = "mii";
> + };
> +
> + port@1 {
> + reg = <1>;
> + phy-handle = <ðphy1>;
> + phy-mode = "mii";
> + };
> +
> + port@2 {
> + reg = <2>;
> + clocks = <&scmi_clk 103>;
> + clock-names = "ref";
> + phy-handle = <ðphy2>;
> + phy-mode = "rgmii-id";
> + };
> +
> + port@3 {
> + reg = <3>;
> + ethernet = <&enetc3>;
> + phy-mode = "internal";
> +
> + fixed-link {
> + speed = <2500>;
> + full-duplex;
> + pause;
> + };
> + };
> + };
> + };
> + };
> --
> 2.34.1
>
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v3 net-next 03/14] net: enetc: add pre-boot initialization for i.MX94 switch
2026-03-26 6:29 [PATCH v3 net-next 00/14] Add preliminary NETC switch support for i.MX94 Wei Fang
2026-03-26 6:29 ` [PATCH v3 net-next 01/14] dt-bindings: net: dsa: update the description of 'dsa,member' property Wei Fang
2026-03-26 6:29 ` [PATCH v3 net-next 02/14] dt-bindings: net: dsa: add NETC switch Wei Fang
@ 2026-03-26 6:29 ` Wei Fang
2026-03-26 6:29 ` [PATCH v3 net-next 04/14] net: enetc: add basic operations to the FDB table Wei Fang
` (10 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Wei Fang @ 2026-03-26 6:29 UTC (permalink / raw)
To: claudiu.manoil, vladimir.oltean, xiaoning.wang, andrew+netdev,
davem, edumazet, kuba, pabeni, robh, krzk+dt, conor+dt,
f.fainelli, frank.li, chleroy, horms, linux, andrew
Cc: netdev, linux-kernel, devicetree, linuxppc-dev, linux-arm-kernel,
imx
Before probing the NETC switch driver, some pre-initialization needs to
be set in NETCMIX and IERB to ensure that the switch can work properly.
For example, i.MX94 NETC switch has three external ports and each port
is bound to a link. And each link needs to be configured so that it can
work properly, such as I/O variant and MII protocol.
In addition, the switch port 2 (MAC 2) and ENETC 0 (MAC 3) share the same
parallel interface, they cannot be used at the same time due to the SoC
constraint. And the MAC selection is controlled by the mac2_mac3_sel bit
of EXT_PIN_CONTROL register. Currently, the interface is set for ENETC 0
by default unless the switch port 2 is enabled in the DT node.
Like ENETC, each external port of the NETC switch can manage its external
PHY through its port MDIO registers. And the port can only access its own
external PHY by setting the PHY address to the LaBCR[MDIO_PHYAD_PRTAD].
If the accessed PHY address is not equal to LaBCR[MDIO_PHYAD_PRTAD], then
the MDIO access initiated by port MDIO will be invalid.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
---
.../ethernet/freescale/enetc/netc_blk_ctrl.c | 188 ++++++++++++++++--
1 file changed, 166 insertions(+), 22 deletions(-)
diff --git a/drivers/net/ethernet/freescale/enetc/netc_blk_ctrl.c b/drivers/net/ethernet/freescale/enetc/netc_blk_ctrl.c
index 92a0f824dae7..c21230f7a7fb 100644
--- a/drivers/net/ethernet/freescale/enetc/netc_blk_ctrl.c
+++ b/drivers/net/ethernet/freescale/enetc/netc_blk_ctrl.c
@@ -261,40 +261,112 @@ static int imx94_link_config(struct netc_blk_ctrl *priv,
}
static int imx94_enetc_link_config(struct netc_blk_ctrl *priv,
- struct device_node *np)
+ struct device_node *np,
+ bool *enetc0_en)
{
int link_id = imx94_enetc_get_link_id(np);
if (link_id < 0)
return link_id;
+ if (link_id == IMX94_ENETC0_LINK && of_device_is_available(np))
+ *enetc0_en = true;
+
return imx94_link_config(priv, np, link_id);
}
+static struct device_node *netc_get_switch_ports(struct device_node *np)
+{
+ struct device_node *ports;
+
+ ports = of_get_child_by_name(np, "ports");
+ if (!ports)
+ ports = of_get_child_by_name(np, "ethernet-ports");
+
+ return ports;
+}
+
+static int imx94_switch_link_config(struct netc_blk_ctrl *priv,
+ struct device_node *np,
+ bool *swp2_en)
+{
+ struct device_node *ports;
+ int port_id, err = 0;
+
+ ports = netc_get_switch_ports(np);
+ if (!ports)
+ return -ENODEV;
+
+ for_each_available_child_of_node_scoped(ports, child) {
+ if (of_property_read_u32(child, "reg", &port_id) < 0) {
+ err = -ENODEV;
+ goto end;
+ }
+
+ switch (port_id) {
+ case 0 ... 2: /* External ports */
+ err = imx94_link_config(priv, child, port_id);
+ if (err)
+ goto end;
+
+ if (port_id == 2)
+ *swp2_en = true;
+
+ break;
+ case 3: /* CPU port */
+ break;
+ default:
+ err = -EINVAL;
+ goto end;
+ }
+ }
+
+end:
+ of_node_put(ports);
+
+ return err;
+}
+
static int imx94_netcmix_init(struct platform_device *pdev)
{
struct netc_blk_ctrl *priv = platform_get_drvdata(pdev);
struct device_node *np = pdev->dev.of_node;
+ bool enetc0_en = false, swp2_en = false;
u32 val;
int err;
for_each_child_of_node_scoped(np, child) {
for_each_child_of_node_scoped(child, gchild) {
- if (!of_device_is_compatible(gchild, "pci1131,e101"))
- continue;
-
- err = imx94_enetc_link_config(priv, gchild);
- if (err)
- return err;
+ if (of_device_is_compatible(gchild, "pci1131,e101")) {
+ err = imx94_enetc_link_config(priv, gchild,
+ &enetc0_en);
+ if (err)
+ return err;
+ } else if (of_device_is_compatible(gchild,
+ "pci1131,eef2")) {
+ err = imx94_switch_link_config(priv, gchild,
+ &swp2_en);
+ if (err)
+ return err;
+ }
}
}
- /* ENETC 0 and switch port 2 share the same parallel interface.
- * Currently, the switch is not supported, so this interface is
- * used by ENETC 0 by default.
+ if (enetc0_en && swp2_en) {
+ dev_err(&pdev->dev,
+ "Cannot enable swp2 and enetc0 at the same time\n");
+ return -EINVAL;
+ }
+
+ /* ENETC 0 and switch port 2 share the same parallel interface, they
+ * cannot be enabled at the same time. The interface is set for the
+ * ENETC 0 by default unless the switch port 2 is enabled in the DTS.
*/
val = netc_reg_read(priv->netcmix, IMX94_EXT_PIN_CONTROL);
- val |= MAC2_MAC3_SEL;
+ if (!swp2_en)
+ val |= MAC2_MAC3_SEL;
+ else
+ val &= ~MAC2_MAC3_SEL;
netc_reg_write(priv->netcmix, IMX94_EXT_PIN_CONTROL, val);
return 0;
@@ -610,6 +682,77 @@ static int imx94_enetc_mdio_phyaddr_config(struct netc_blk_ctrl *priv,
return 0;
}
+static int imx94_ierb_enetc_init(struct netc_blk_ctrl *priv,
+ struct device_node *np,
+ u32 phy_mask)
+{
+ int err;
+
+ err = imx94_enetc_update_tid(priv, np);
+ if (err)
+ return err;
+
+ return imx94_enetc_mdio_phyaddr_config(priv, np, phy_mask);
+}
+
+static int imx94_switch_mdio_phyaddr_config(struct netc_blk_ctrl *priv,
+ struct device_node *np,
+ int port_id, u32 phy_mask)
+{
+ int addr;
+
+ /* The switch has 3 external ports at most */
+ if (port_id > 2)
+ return 0;
+
+ addr = netc_get_phy_addr(np);
+ if (addr < 0) {
+ if (addr == -ENODEV)
+ return 0;
+
+ return addr;
+ }
+
+ if (phy_mask & BIT(addr)) {
+ dev_err(&priv->pdev->dev,
+ "Found same PHY address in EMDIO and switch node\n");
+ return -EINVAL;
+ }
+
+ netc_reg_write(priv->ierb, IERB_LBCR(port_id),
+ LBCR_MDIO_PHYAD_PRTAD(addr));
+
+ return 0;
+}
+
+static int imx94_ierb_switch_init(struct netc_blk_ctrl *priv,
+ struct device_node *np,
+ u32 phy_mask)
+{
+ struct device_node *ports;
+ int port_id, err = 0;
+
+ ports = netc_get_switch_ports(np);
+ if (!ports)
+ return -ENODEV;
+
+ for_each_available_child_of_node_scoped(ports, child) {
+ err = of_property_read_u32(child, "reg", &port_id);
+ if (err)
+ goto end;
+
+ err = imx94_switch_mdio_phyaddr_config(priv, child,
+ port_id, phy_mask);
+ if (err)
+ goto end;
+ }
+
+end:
+ of_node_put(ports);
+
+ return err;
+}
+
static int imx94_ierb_init(struct platform_device *pdev)
{
struct netc_blk_ctrl *priv = platform_get_drvdata(pdev);
@@ -625,17 +768,18 @@ static int imx94_ierb_init(struct platform_device *pdev)
for_each_child_of_node_scoped(np, child) {
for_each_child_of_node_scoped(child, gchild) {
- if (!of_device_is_compatible(gchild, "pci1131,e101"))
- continue;
-
- err = imx94_enetc_update_tid(priv, gchild);
- if (err)
- return err;
-
- err = imx94_enetc_mdio_phyaddr_config(priv, gchild,
- phy_mask);
- if (err)
- return err;
+ if (of_device_is_compatible(gchild, "pci1131,e101")) {
+ err = imx94_ierb_enetc_init(priv, gchild,
+ phy_mask);
+ if (err)
+ return err;
+ } else if (of_device_is_compatible(gchild,
+ "pci1131,eef2")) {
+ err = imx94_ierb_switch_init(priv, gchild,
+ phy_mask);
+ if (err)
+ return err;
+ }
}
}
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v3 net-next 04/14] net: enetc: add basic operations to the FDB table
2026-03-26 6:29 [PATCH v3 net-next 00/14] Add preliminary NETC switch support for i.MX94 Wei Fang
` (2 preceding siblings ...)
2026-03-26 6:29 ` [PATCH v3 net-next 03/14] net: enetc: add pre-boot initialization for i.MX94 switch Wei Fang
@ 2026-03-26 6:29 ` Wei Fang
2026-03-26 6:29 ` [PATCH v3 net-next 05/14] net: enetc: add support for the "Add" operation to VLAN filter table Wei Fang
` (9 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Wei Fang @ 2026-03-26 6:29 UTC (permalink / raw)
To: claudiu.manoil, vladimir.oltean, xiaoning.wang, andrew+netdev,
davem, edumazet, kuba, pabeni, robh, krzk+dt, conor+dt,
f.fainelli, frank.li, chleroy, horms, linux, andrew
Cc: netdev, linux-kernel, devicetree, linuxppc-dev, linux-arm-kernel,
imx
The FDB table is used for MAC learning lookups and MAC forwarding lookups.
Each table entry includes information such as a FID and MAC address that
may be unicast or multicast and a forwarding destination field containing
a port bitmap identifying the associated port(s) with the MAC address.
FDB table entries can be static or dynamic. Static entries are added from
software whereby dynamic entries are added either by software or by the
hardware as MAC addresses are learned in the datapath.
The FDB table can only be managed by the command BD ring using table
management protocol version 2.0. Table management command operations Add,
Delete, Update and Query are supported. And the FDB table supports three
access methods: Entry ID, Exact Match Key Element and Search. This patch
adds the following basic supports to the FDB table.
ntmp_fdbt_update_entry() - update the configuration element data of a
specified FDB entry
ntmp_fdbt_delete_entry() - delete a specified FDB entry
ntmp_fdbt_add_entry() - add an entry into the FDB table
ntmp_fdbt_search_port_entry() - Search the FDB entry on the specified
port based on RESUME_ENTRY_ID.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
---
drivers/net/ethernet/freescale/enetc/ntmp.c | 201 +++++++++++++++++-
.../ethernet/freescale/enetc/ntmp_private.h | 61 +++++-
include/linux/fsl/ntmp.h | 69 +++++-
3 files changed, 328 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/freescale/enetc/ntmp.c b/drivers/net/ethernet/freescale/enetc/ntmp.c
index 703752995e93..a4a99954baf2 100644
--- a/drivers/net/ethernet/freescale/enetc/ntmp.c
+++ b/drivers/net/ethernet/freescale/enetc/ntmp.c
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* NETC NTMP (NETC Table Management Protocol) 2.0 Library
- * Copyright 2025 NXP
+ * Copyright 2025-2026 NXP
*/
#include <linux/dma-mapping.h>
@@ -20,11 +20,15 @@
/* Define NTMP Table ID */
#define NTMP_MAFT_ID 1
#define NTMP_RSST_ID 3
+#define NTMP_FDBT_ID 15
/* Generic Update Actions for most tables */
#define NTMP_GEN_UA_CFGEU BIT(0)
#define NTMP_GEN_UA_STSEU BIT(1)
+/* Query Action: 0: Full query, 1: Only query entry ID */
+#define NTMP_QA_ENTRY_ID 1
+
#define NTMP_ENTRY_ID_SIZE 4
#define RSST_ENTRY_NUM 64
#define RSST_STSE_DATA_SIZE(n) ((n) * 8)
@@ -225,6 +229,8 @@ static const char *ntmp_table_name(int tbl_id)
return "MAC Address Filter Table";
case NTMP_RSST_ID:
return "RSS Table";
+ case NTMP_FDBT_ID:
+ return "FDB Table";
default:
return "Unknown Table";
}
@@ -453,5 +459,198 @@ int ntmp_rsst_query_entry(struct ntmp_user *user, u32 *table, int count)
}
EXPORT_SYMBOL_GPL(ntmp_rsst_query_entry);
+/**
+ * ntmp_fdbt_add_entry - add an entry into the FDB table
+ * @user: target ntmp_user struct
+ * @entry_id: returned value, the entry ID of the new added entry
+ * @keye: key element data
+ * @cfge: configuration element data
+ *
+ * Return: 0 on success, otherwise a negative error code
+ */
+int ntmp_fdbt_add_entry(struct ntmp_user *user, u32 *entry_id,
+ const struct fdbt_keye_data *keye,
+ const struct fdbt_cfge_data *cfge)
+{
+ struct ntmp_dma_buf data = {
+ .dev = user->dev,
+ .size = sizeof(struct fdbt_req_ua),
+ };
+ struct fdbt_resp_query *resp;
+ struct fdbt_req_ua *req;
+ union netc_cbd cbd;
+ u32 len;
+ int err;
+
+ err = ntmp_alloc_data_mem(&data, (void **)&req);
+ if (err)
+ return err;
+
+ /* Request data */
+ ntmp_fill_crd(&req->crd, user->tbl.fdbt_ver, NTMP_QA_ENTRY_ID,
+ NTMP_GEN_UA_CFGEU);
+ req->ak.exact.keye = *keye;
+ req->cfge = *cfge;
+
+ len = NTMP_LEN(data.size, sizeof(*resp));
+ /* The entry ID is allotted by hardware, so we need to perform
+ * a query action after the add action to get the entry ID from
+ * hardware.
+ */
+ ntmp_fill_request_hdr(&cbd, data.dma, len, NTMP_FDBT_ID,
+ NTMP_CMD_AQ, NTMP_AM_EXACT_KEY);
+ err = netc_xmit_ntmp_cmd(user, &cbd);
+ if (err) {
+ dev_err(user->dev, "Failed to add %s entry, err: %pe\n",
+ ntmp_table_name(NTMP_FDBT_ID), ERR_PTR(err));
+ goto end;
+ }
+
+ if (entry_id) {
+ resp = (struct fdbt_resp_query *)req;
+ *entry_id = le32_to_cpu(resp->entry_id);
+ }
+
+end:
+ ntmp_free_data_mem(&data);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(ntmp_fdbt_add_entry);
+
+/**
+ * ntmp_fdbt_update_entry - update the configuration element data of the
+ * specified FDB entry
+ * @user: target ntmp_user struct
+ * @entry_id: the specified entry ID of the FDB table
+ * @cfge: configuration element data
+ *
+ * Return: 0 on success, otherwise a negative error code
+ */
+int ntmp_fdbt_update_entry(struct ntmp_user *user, u32 entry_id,
+ const struct fdbt_cfge_data *cfge)
+{
+ struct ntmp_dma_buf data = {
+ .dev = user->dev,
+ .size = sizeof(struct fdbt_req_ua),
+ };
+ struct fdbt_req_ua *req;
+ union netc_cbd cbd;
+ u32 len;
+ int err;
+
+ err = ntmp_alloc_data_mem(&data, (void **)&req);
+ if (err)
+ return err;
+
+ /* Request data */
+ ntmp_fill_crd(&req->crd, user->tbl.fdbt_ver, 0, NTMP_GEN_UA_CFGEU);
+ req->ak.eid.entry_id = cpu_to_le32(entry_id);
+ req->cfge = *cfge;
+
+ /* Request header */
+ len = NTMP_LEN(data.size, NTMP_STATUS_RESP_LEN);
+ ntmp_fill_request_hdr(&cbd, data.dma, len, NTMP_FDBT_ID,
+ NTMP_CMD_UPDATE, NTMP_AM_ENTRY_ID);
+ err = netc_xmit_ntmp_cmd(user, &cbd);
+ if (err)
+ dev_err(user->dev, "Failed to update %s entry, err: %pe\n",
+ ntmp_table_name(NTMP_FDBT_ID), ERR_PTR(err));
+
+ ntmp_free_data_mem(&data);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(ntmp_fdbt_update_entry);
+
+/**
+ * ntmp_fdbt_delete_entry - delete the specified FDB entry
+ * @user: target ntmp_user struct
+ * @entry_id: the specified ID of the FDB entry
+ *
+ * Return: 0 on success, otherwise a negative error code
+ */
+int ntmp_fdbt_delete_entry(struct ntmp_user *user, u32 entry_id)
+{
+ u32 req_len = sizeof(struct fdbt_req_qd);
+
+ return ntmp_delete_entry_by_id(user, NTMP_FDBT_ID,
+ user->tbl.fdbt_ver,
+ entry_id, req_len,
+ NTMP_STATUS_RESP_LEN);
+}
+EXPORT_SYMBOL_GPL(ntmp_fdbt_delete_entry);
+
+/**
+ * ntmp_fdbt_search_port_entry - Search the FDB entry on the specified
+ * port based on RESUME_ENTRY_ID
+ * @user: target ntmp_user struct
+ * @port: the specified switch port ID
+ * @resume_entry_id: it is both an input and an output. As an input, it
+ * represents the FDB entry ID to be searched. If it is a NULL entry ID,
+ * it indicates that the first FDB entry for that port is being searched.
+ * As an output, it represents the next FDB entry ID to be searched.
+ * @entry: returned value, the response data of the searched FDB entry
+ *
+ * Return: 0 on success, otherwise a negative error code
+ */
+int ntmp_fdbt_search_port_entry(struct ntmp_user *user, int port,
+ u32 *resume_entry_id,
+ struct fdbt_entry_data *entry)
+{
+ struct ntmp_dma_buf data = {
+ .dev = user->dev,
+ .size = sizeof(struct fdbt_req_qd),
+ };
+ struct fdbt_resp_query *resp;
+ struct fdbt_req_qd *req;
+ union netc_cbd cbd;
+ u32 len;
+ int err;
+
+ err = ntmp_alloc_data_mem(&data, (void **)&req);
+ if (err)
+ return err;
+
+ /* Request data */
+ ntmp_fill_crd(&req->crd, user->tbl.fdbt_ver, 0, 0);
+ req->ak.search.resume_eid = cpu_to_le32(*resume_entry_id);
+ req->ak.search.cfge.port_bitmap = cpu_to_le32(BIT(port));
+ /* Match CFGE_DATA[PORT_BITMAP] field */
+ req->ak.search.cfge_mc = FDBT_CFGE_MC_PORT_BITMAP;
+
+ /* Request header */
+ len = NTMP_LEN(data.size, sizeof(*resp));
+ ntmp_fill_request_hdr(&cbd, data.dma, len, NTMP_FDBT_ID,
+ NTMP_CMD_QUERY, NTMP_AM_SEARCH);
+
+ err = netc_xmit_ntmp_cmd(user, &cbd);
+ if (err) {
+ dev_err(user->dev,
+ "Failed to search %s entry on port %d, err: %pe\n",
+ ntmp_table_name(NTMP_FDBT_ID), port, ERR_PTR(err));
+ goto end;
+ }
+
+ if (!cbd.resp_hdr.num_matched) {
+ entry->entry_id = NTMP_NULL_ENTRY_ID;
+ *resume_entry_id = NTMP_NULL_ENTRY_ID;
+ goto end;
+ }
+
+ resp = (struct fdbt_resp_query *)req;
+ *resume_entry_id = le32_to_cpu(resp->status);
+ entry->entry_id = le32_to_cpu(resp->entry_id);
+ entry->keye = resp->keye;
+ entry->cfge = resp->cfge;
+ entry->acte = resp->acte;
+
+end:
+ ntmp_free_data_mem(&data);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(ntmp_fdbt_search_port_entry);
+
MODULE_DESCRIPTION("NXP NETC Library");
MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/ethernet/freescale/enetc/ntmp_private.h b/drivers/net/ethernet/freescale/enetc/ntmp_private.h
index 34394e40fddd..8999eafe1920 100644
--- a/drivers/net/ethernet/freescale/enetc/ntmp_private.h
+++ b/drivers/net/ethernet/freescale/enetc/ntmp_private.h
@@ -1,7 +1,7 @@
/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
/*
* NTMP table request and response data buffer formats
- * Copyright 2025 NXP
+ * Copyright 2025-2026 NXP
*/
#ifndef __NTMP_PRIVATE_H
@@ -11,6 +11,7 @@
#include <linux/fsl/ntmp.h>
#define NTMP_EID_REQ_LEN 8
+#define NTMP_STATUS_RESP_LEN 4
#define NETC_CBDR_BD_NUM 256
union netc_cbd {
@@ -27,6 +28,7 @@ union netc_cbd {
#define NTMP_CMD_QUERY BIT(2)
#define NTMP_CMD_ADD BIT(3)
#define NTMP_CMD_QU (NTMP_CMD_QUERY | NTMP_CMD_UPDATE)
+#define NTMP_CMD_AQ (NTMP_CMD_ADD | NTMP_CMD_QUERY)
u8 access_method;
#define NTMP_ACCESS_METHOD GENMASK(7, 4)
#define NTMP_AM_ENTRY_ID 0
@@ -101,4 +103,61 @@ struct rsst_req_update {
u8 groups[];
};
+/* Access Key Format of FDB Table */
+struct fdbt_ak_eid {
+ __le32 entry_id;
+ __le32 resv[7];
+};
+
+struct fdbt_ak_exact {
+ struct fdbt_keye_data keye;
+ __le32 resv[5];
+};
+
+struct fdbt_ak_search {
+ __le32 resume_eid;
+ struct fdbt_keye_data keye;
+ struct fdbt_cfge_data cfge;
+ u8 acte;
+ u8 keye_mc;
+#define FDBT_KEYE_MAC GENMASK(1, 0)
+ u8 cfge_mc;
+#define FDBT_CFGE_MC GENMASK(2, 0)
+#define FDBT_CFGE_MC_ANY 0
+#define FDBT_CFGE_MC_DYNAMIC 1
+#define FDBT_CFGE_MC_PORT_BITMAP 2
+#define FDBT_CFGE_MC_DYNAMIC_AND_PORT_BITMAP 3
+ u8 acte_mc;
+#define FDBT_ACTE_MC BIT(0)
+};
+
+union fdbt_access_key {
+ struct fdbt_ak_eid eid;
+ struct fdbt_ak_exact exact;
+ struct fdbt_ak_search search;
+};
+
+/* FDB Table Request Data Buffer Format of Update and Add actions */
+struct fdbt_req_ua {
+ struct ntmp_cmn_req_data crd;
+ union fdbt_access_key ak;
+ struct fdbt_cfge_data cfge;
+};
+
+/* FDB Table Request Data Buffer Format of Query and Delete actions */
+struct fdbt_req_qd {
+ struct ntmp_cmn_req_data crd;
+ union fdbt_access_key ak;
+};
+
+/* FDB Table Response Data Buffer Format of Query action */
+struct fdbt_resp_query {
+ __le32 status;
+ __le32 entry_id;
+ struct fdbt_keye_data keye;
+ struct fdbt_cfge_data cfge;
+ u8 acte;
+ u8 resv[3];
+};
+
#endif
diff --git a/include/linux/fsl/ntmp.h b/include/linux/fsl/ntmp.h
index 916dc4fe7de3..a9f3e6cbf422 100644
--- a/include/linux/fsl/ntmp.h
+++ b/include/linux/fsl/ntmp.h
@@ -1,11 +1,13 @@
/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
-/* Copyright 2025 NXP */
+/* Copyright 2025-2026 NXP */
#ifndef __NETC_NTMP_H
#define __NETC_NTMP_H
#include <linux/bitops.h>
#include <linux/if_ether.h>
+#define NTMP_NULL_ENTRY_ID 0xffffffffU
+
struct maft_keye_data {
u8 mac_addr[ETH_ALEN];
__le16 resv;
@@ -29,6 +31,7 @@ struct netc_cbdr_regs {
struct netc_tbl_vers {
u8 maft_ver;
u8 rsst_ver;
+ u8 fdbt_ver;
};
struct netc_cbdr {
@@ -61,6 +64,36 @@ struct maft_entry_data {
struct maft_cfge_data cfge;
};
+struct fdbt_keye_data {
+ u8 mac_addr[ETH_ALEN]; /* big-endian */
+ __le16 resv0;
+ __le16 fid;
+#define FDBT_FID GENMASK(11, 0)
+ __le16 resv1;
+};
+
+struct fdbt_cfge_data {
+ __le32 port_bitmap;
+#define FDBT_PORT_BITMAP GENMASK(23, 0)
+ __le32 cfg;
+#define FDBT_OETEID GENMASK(1, 0)
+#define FDBT_EPORT GENMASK(6, 2)
+#define FDBT_IMIRE BIT(7)
+#define FDBT_CTD GENMASK(10, 9)
+#define FDBT_DYNAMIC BIT(11)
+#define FDBT_TIMECAPE BIT(12)
+ __le32 et_eid;
+};
+
+struct fdbt_entry_data {
+ u32 entry_id;
+ struct fdbt_keye_data keye;
+ struct fdbt_cfge_data cfge;
+ u8 acte;
+#define FDBT_ACT_CNT GENMASK(6, 0)
+#define FDBT_ACT_FLAG BIT(7)
+};
+
#if IS_ENABLED(CONFIG_NXP_NETC_LIB)
int ntmp_init_cbdr(struct netc_cbdr *cbdr, struct device *dev,
const struct netc_cbdr_regs *regs);
@@ -76,6 +109,15 @@ int ntmp_rsst_update_entry(struct ntmp_user *user, const u32 *table,
int count);
int ntmp_rsst_query_entry(struct ntmp_user *user,
u32 *table, int count);
+int ntmp_fdbt_add_entry(struct ntmp_user *user, u32 *entry_id,
+ const struct fdbt_keye_data *keye,
+ const struct fdbt_cfge_data *cfge);
+int ntmp_fdbt_update_entry(struct ntmp_user *user, u32 entry_id,
+ const struct fdbt_cfge_data *cfge);
+int ntmp_fdbt_delete_entry(struct ntmp_user *user, u32 entry_id);
+int ntmp_fdbt_search_port_entry(struct ntmp_user *user, int port,
+ u32 *resume_entry_id,
+ struct fdbt_entry_data *entry);
#else
static inline int ntmp_init_cbdr(struct netc_cbdr *cbdr, struct device *dev,
const struct netc_cbdr_regs *regs)
@@ -116,6 +158,31 @@ static inline int ntmp_rsst_query_entry(struct ntmp_user *user,
return 0;
}
+static inline int ntmp_fdbt_add_entry(struct ntmp_user *user, u32 *entry_id,
+ const struct fdbt_keye_data *keye,
+ const struct fdbt_cfge_data *data)
+{
+ return 0;
+}
+
+static inline int ntmp_fdbt_update_entry(struct ntmp_user *user, u32 entry_id,
+ const struct fdbt_cfge_data *cfge)
+{
+ return 0;
+}
+
+static inline int ntmp_fdbt_delete_entry(struct ntmp_user *user, u32 entry_id)
+{
+ return 0;
+}
+
+static inline int ntmp_fdbt_search_port_entry(struct ntmp_user *user, int port,
+ u32 *resume_entry_id,
+ struct fdbt_entry_data *entry)
+{
+ return 0;
+}
+
#endif
#endif
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v3 net-next 05/14] net: enetc: add support for the "Add" operation to VLAN filter table
2026-03-26 6:29 [PATCH v3 net-next 00/14] Add preliminary NETC switch support for i.MX94 Wei Fang
` (3 preceding siblings ...)
2026-03-26 6:29 ` [PATCH v3 net-next 04/14] net: enetc: add basic operations to the FDB table Wei Fang
@ 2026-03-26 6:29 ` Wei Fang
2026-03-26 6:29 ` [PATCH v3 net-next 06/14] net: enetc: add support for the "Update" operation to buffer pool table Wei Fang
` (8 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Wei Fang @ 2026-03-26 6:29 UTC (permalink / raw)
To: claudiu.manoil, vladimir.oltean, xiaoning.wang, andrew+netdev,
davem, edumazet, kuba, pabeni, robh, krzk+dt, conor+dt,
f.fainelli, frank.li, chleroy, horms, linux, andrew
Cc: netdev, linux-kernel, devicetree, linuxppc-dev, linux-arm-kernel,
imx
The VLAN filter table contains configuration and control information for
each VLAN configured on the switch. Each VLAN entry includes the VLAN
port membership, which FID to use in the FDB lookup, which spanning tree
group to use, the egress frame modification actions to apply to a frame
exiting form this VLAN, and various configuration and control parameters
for this VLAN.
The VLAN filter table can only be managed by the command BD ring using
table management protocol version 2.0. The table supports Add, Delete,
Update and Query operations. And the table supports 3 access methods:
Entry ID, Exact Match Key Element and Search. But currently we only add
the ntmp_vft_add_entry() helper to support the upcoming switch driver to
add an entry to the VLAN filter table. Other interfaces will be added in
the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
---
drivers/net/ethernet/freescale/enetc/ntmp.c | 50 +++++++++++++++++++
.../ethernet/freescale/enetc/ntmp_private.h | 19 +++++++
include/linux/fsl/ntmp.h | 30 +++++++++++
3 files changed, 99 insertions(+)
diff --git a/drivers/net/ethernet/freescale/enetc/ntmp.c b/drivers/net/ethernet/freescale/enetc/ntmp.c
index a4a99954baf2..d7d8a37078d1 100644
--- a/drivers/net/ethernet/freescale/enetc/ntmp.c
+++ b/drivers/net/ethernet/freescale/enetc/ntmp.c
@@ -21,6 +21,7 @@
#define NTMP_MAFT_ID 1
#define NTMP_RSST_ID 3
#define NTMP_FDBT_ID 15
+#define NTMP_VFT_ID 18
/* Generic Update Actions for most tables */
#define NTMP_GEN_UA_CFGEU BIT(0)
@@ -231,6 +232,8 @@ static const char *ntmp_table_name(int tbl_id)
return "RSS Table";
case NTMP_FDBT_ID:
return "FDB Table";
+ case NTMP_VFT_ID:
+ return "VLAN Filter Table";
default:
return "Unknown Table";
}
@@ -652,5 +655,52 @@ int ntmp_fdbt_search_port_entry(struct ntmp_user *user, int port,
}
EXPORT_SYMBOL_GPL(ntmp_fdbt_search_port_entry);
+/**
+ * ntmp_vft_add_entry - add an entry into the VLAN filter table
+ * @user: target ntmp_user struct
+ * @vid: VLAN ID
+ * @cfge: configuration element data
+ *
+ * Return: 0 on success, otherwise a negative error code
+ */
+int ntmp_vft_add_entry(struct ntmp_user *user, u16 vid,
+ const struct vft_cfge_data *cfge)
+{
+ struct ntmp_dma_buf data = {
+ .dev = user->dev,
+ .size = sizeof(struct vft_req_ua),
+ };
+ struct vft_req_ua *req;
+ union netc_cbd cbd;
+ u32 len;
+ int err;
+
+ err = ntmp_alloc_data_mem(&data, (void **)&req);
+ if (err)
+ return err;
+
+ /* Request data */
+ ntmp_fill_crd(&req->crd, user->tbl.vft_ver, 0,
+ NTMP_GEN_UA_CFGEU);
+ req->ak.exact.vid = cpu_to_le16(vid);
+ req->cfge = *cfge;
+
+ /* Request header */
+ len = NTMP_LEN(data.size, NTMP_STATUS_RESP_LEN);
+ ntmp_fill_request_hdr(&cbd, data.dma, len, NTMP_VFT_ID,
+ NTMP_CMD_ADD, NTMP_AM_EXACT_KEY);
+
+ err = netc_xmit_ntmp_cmd(user, &cbd);
+ if (err)
+ dev_err(user->dev,
+ "Failed to add %s entry, vid: %u, err: %pe\n",
+ ntmp_table_name(NTMP_VFT_ID), vid, ERR_PTR(err));
+
+ ntmp_free_data_mem(&data);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(ntmp_vft_add_entry);
+
MODULE_DESCRIPTION("NXP NETC Library");
MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/ethernet/freescale/enetc/ntmp_private.h b/drivers/net/ethernet/freescale/enetc/ntmp_private.h
index 8999eafe1920..d2a6399b0a36 100644
--- a/drivers/net/ethernet/freescale/enetc/ntmp_private.h
+++ b/drivers/net/ethernet/freescale/enetc/ntmp_private.h
@@ -160,4 +160,23 @@ struct fdbt_resp_query {
u8 resv[3];
};
+/* Access Key Format of VLAN Filter Table */
+struct vft_ak_exact {
+ __le16 vid; /* bit0~11: VLAN ID, other bits are reserved */
+ __le16 resv;
+};
+
+union vft_access_key {
+ __le32 entry_id; /* entry_id match */
+ struct vft_ak_exact exact;
+ __le32 resume_entry_id; /* search */
+};
+
+/* VLAN Filter Table Request Data Buffer Format of Update and Add actions */
+struct vft_req_ua {
+ struct ntmp_cmn_req_data crd;
+ union vft_access_key ak;
+ struct vft_cfge_data cfge;
+};
+
#endif
diff --git a/include/linux/fsl/ntmp.h b/include/linux/fsl/ntmp.h
index a9f3e6cbf422..2aedea17307f 100644
--- a/include/linux/fsl/ntmp.h
+++ b/include/linux/fsl/ntmp.h
@@ -32,6 +32,7 @@ struct netc_tbl_vers {
u8 maft_ver;
u8 rsst_ver;
u8 fdbt_ver;
+ u8 vft_ver;
};
struct netc_cbdr {
@@ -94,6 +95,27 @@ struct fdbt_entry_data {
#define FDBT_ACT_FLAG BIT(7)
};
+struct vft_cfge_data {
+ __le32 bitmap_stg;
+#define VFT_PORT_MEMBERSHIP GENMASK(23, 0)
+#define VFT_STG_ID_MASK GENMASK(27, 24)
+#define VFT_STG_ID(g) FIELD_PREP(VFT_STG_ID_MASK, (g))
+ __le16 fid;
+#define VFT_FID GENMASK(11, 0)
+ __le16 cfg;
+#define VFT_MLO GENMASK(2, 0)
+#define VFT_MFO GENMASK(4, 3)
+#define VFT_IPMFE BIT(6)
+#define VFT_IPMFLE BIT(7)
+#define VFT_PGA BIT(8)
+#define VFT_SFDA BIT(10)
+#define VFT_OSFDA BIT(11)
+#define VFT_FDBAFSS BIT(12)
+ __le32 eta_port_bitmap;
+#define VFT_ETA_PORT_BITMAP GENMASK(23, 0)
+ __le32 et_eid;
+};
+
#if IS_ENABLED(CONFIG_NXP_NETC_LIB)
int ntmp_init_cbdr(struct netc_cbdr *cbdr, struct device *dev,
const struct netc_cbdr_regs *regs);
@@ -118,6 +140,8 @@ int ntmp_fdbt_delete_entry(struct ntmp_user *user, u32 entry_id);
int ntmp_fdbt_search_port_entry(struct ntmp_user *user, int port,
u32 *resume_entry_id,
struct fdbt_entry_data *entry);
+int ntmp_vft_add_entry(struct ntmp_user *user, u16 vid,
+ const struct vft_cfge_data *cfge);
#else
static inline int ntmp_init_cbdr(struct netc_cbdr *cbdr, struct device *dev,
const struct netc_cbdr_regs *regs)
@@ -183,6 +207,12 @@ static inline int ntmp_fdbt_search_port_entry(struct ntmp_user *user, int port,
return 0;
}
+static inline int ntmp_vft_add_entry(struct ntmp_user *user, u16 vid,
+ const struct vft_cfge_data *cfge)
+{
+ return 0;
+}
+
#endif
#endif
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v3 net-next 06/14] net: enetc: add support for the "Update" operation to buffer pool table
2026-03-26 6:29 [PATCH v3 net-next 00/14] Add preliminary NETC switch support for i.MX94 Wei Fang
` (4 preceding siblings ...)
2026-03-26 6:29 ` [PATCH v3 net-next 05/14] net: enetc: add support for the "Add" operation to VLAN filter table Wei Fang
@ 2026-03-26 6:29 ` Wei Fang
2026-03-26 6:29 ` [PATCH v3 net-next 07/14] net: enetc: add support for "Add" and "Delete" operations to IPFT Wei Fang
` (7 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Wei Fang @ 2026-03-26 6:29 UTC (permalink / raw)
To: claudiu.manoil, vladimir.oltean, xiaoning.wang, andrew+netdev,
davem, edumazet, kuba, pabeni, robh, krzk+dt, conor+dt,
f.fainelli, frank.li, chleroy, horms, linux, andrew
Cc: netdev, linux-kernel, devicetree, linuxppc-dev, linux-arm-kernel,
imx
The buffer pool table contains buffer pool configuration and operational
information. Each entry corresponds to a buffer pool. The Entry ID value
represents the buffer pool ID to access.
The buffer pool table is a static bounded index table, buffer pools are
always present and enabled. It only supports Update and Query operations,
This patch only adds ntmp_bpt_update_entry() helper to support updating
the specified entry of the buffer pool table. Query action to the table
will be added in the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
---
drivers/net/ethernet/freescale/enetc/ntmp.c | 39 +++++++++++++++++++
.../ethernet/freescale/enetc/ntmp_private.h | 6 +++
include/linux/fsl/ntmp.h | 32 +++++++++++++++
3 files changed, 77 insertions(+)
diff --git a/drivers/net/ethernet/freescale/enetc/ntmp.c b/drivers/net/ethernet/freescale/enetc/ntmp.c
index d7d8a37078d1..3c59b355c142 100644
--- a/drivers/net/ethernet/freescale/enetc/ntmp.c
+++ b/drivers/net/ethernet/freescale/enetc/ntmp.c
@@ -22,11 +22,15 @@
#define NTMP_RSST_ID 3
#define NTMP_FDBT_ID 15
#define NTMP_VFT_ID 18
+#define NTMP_BPT_ID 41
/* Generic Update Actions for most tables */
#define NTMP_GEN_UA_CFGEU BIT(0)
#define NTMP_GEN_UA_STSEU BIT(1)
+/* Specific Update Actions for some tables */
+#define BPT_UA_BPSEU BIT(1)
+
/* Query Action: 0: Full query, 1: Only query entry ID */
#define NTMP_QA_ENTRY_ID 1
@@ -234,6 +238,8 @@ static const char *ntmp_table_name(int tbl_id)
return "FDB Table";
case NTMP_VFT_ID:
return "VLAN Filter Table";
+ case NTMP_BPT_ID:
+ return "Buffer Pool Table";
default:
return "Unknown Table";
}
@@ -702,5 +708,38 @@ int ntmp_vft_add_entry(struct ntmp_user *user, u16 vid,
}
EXPORT_SYMBOL_GPL(ntmp_vft_add_entry);
+int ntmp_bpt_update_entry(struct ntmp_user *user, u32 entry_id,
+ const struct bpt_cfge_data *cfge)
+{
+ struct ntmp_dma_buf data = {
+ .dev = user->dev,
+ .size = sizeof(struct bpt_req_update),
+ };
+ struct bpt_req_update *req;
+ union netc_cbd cbd;
+ int err;
+
+ err = ntmp_alloc_data_mem(&data, (void **)&req);
+ if (err)
+ return err;
+
+ ntmp_fill_crd_eid(&req->rbe, user->tbl.bpt_ver, 0,
+ NTMP_GEN_UA_CFGEU | BPT_UA_BPSEU, entry_id);
+ req->cfge = *cfge;
+ ntmp_fill_request_hdr(&cbd, data.dma, NTMP_LEN(data.size, 0),
+ NTMP_BPT_ID, NTMP_CMD_UPDATE, NTMP_AM_ENTRY_ID);
+
+ err = netc_xmit_ntmp_cmd(user, &cbd);
+ if (err)
+ dev_err(user->dev,
+ "Failed to update %s entry 0x%x, err: %pe\n",
+ ntmp_table_name(NTMP_BPT_ID), entry_id, ERR_PTR(err));
+
+ ntmp_free_data_mem(&data);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(ntmp_bpt_update_entry);
+
MODULE_DESCRIPTION("NXP NETC Library");
MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/ethernet/freescale/enetc/ntmp_private.h b/drivers/net/ethernet/freescale/enetc/ntmp_private.h
index d2a6399b0a36..7d50af7745c7 100644
--- a/drivers/net/ethernet/freescale/enetc/ntmp_private.h
+++ b/drivers/net/ethernet/freescale/enetc/ntmp_private.h
@@ -179,4 +179,10 @@ struct vft_req_ua {
struct vft_cfge_data cfge;
};
+/* Buffer Pool Table Request Data Buffer Format of Update action */
+struct bpt_req_update {
+ struct ntmp_req_by_eid rbe;
+ struct bpt_cfge_data cfge;
+};
+
#endif
diff --git a/include/linux/fsl/ntmp.h b/include/linux/fsl/ntmp.h
index 2aedea17307f..a54945dcdc61 100644
--- a/include/linux/fsl/ntmp.h
+++ b/include/linux/fsl/ntmp.h
@@ -33,6 +33,7 @@ struct netc_tbl_vers {
u8 rsst_ver;
u8 fdbt_ver;
u8 vft_ver;
+ u8 bpt_ver;
};
struct netc_cbdr {
@@ -116,6 +117,29 @@ struct vft_cfge_data {
__le32 et_eid;
};
+struct bpt_bpse_data {
+ __le32 amount_used;
+ __le32 amount_used_hwm;
+ u8 bpd_fc_state;
+#define BPT_FC_STATE BIT(0)
+#define BPT_BPD BIT(1)
+} __packed;
+
+struct bpt_cfge_data {
+ u8 fccfg_sbpen;
+#define BPT_SBP_EN BIT(0)
+#define BPT_FC_CFG GENMASK(2, 1)
+#define BPT_FC_CFG_EN_BPFC 1
+ u8 pfc_vector;
+ __le16 max_thresh;
+ __le16 fc_on_thresh;
+ __le16 fc_off_thresh;
+ __le16 sbp_thresh;
+ __le16 resv;
+ __le32 sbp_eid;
+ __le32 fc_ports;
+};
+
#if IS_ENABLED(CONFIG_NXP_NETC_LIB)
int ntmp_init_cbdr(struct netc_cbdr *cbdr, struct device *dev,
const struct netc_cbdr_regs *regs);
@@ -142,6 +166,8 @@ int ntmp_fdbt_search_port_entry(struct ntmp_user *user, int port,
struct fdbt_entry_data *entry);
int ntmp_vft_add_entry(struct ntmp_user *user, u16 vid,
const struct vft_cfge_data *cfge);
+int ntmp_bpt_update_entry(struct ntmp_user *user, u32 entry_id,
+ const struct bpt_cfge_data *cfge);
#else
static inline int ntmp_init_cbdr(struct netc_cbdr *cbdr, struct device *dev,
const struct netc_cbdr_regs *regs)
@@ -213,6 +239,12 @@ static inline int ntmp_vft_add_entry(struct ntmp_user *user, u16 vid,
return 0;
}
+static inline int ntmp_bpt_update_entry(struct ntmp_user *user, u32 entry_id,
+ const struct bpt_cfge_data *cfge)
+{
+ return 0;
+}
+
#endif
#endif
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v3 net-next 07/14] net: enetc: add support for "Add" and "Delete" operations to IPFT
2026-03-26 6:29 [PATCH v3 net-next 00/14] Add preliminary NETC switch support for i.MX94 Wei Fang
` (5 preceding siblings ...)
2026-03-26 6:29 ` [PATCH v3 net-next 06/14] net: enetc: add support for the "Update" operation to buffer pool table Wei Fang
@ 2026-03-26 6:29 ` Wei Fang
2026-03-26 6:29 ` [PATCH v3 net-next 08/14] net: enetc: add multiple command BD rings support Wei Fang
` (6 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Wei Fang @ 2026-03-26 6:29 UTC (permalink / raw)
To: claudiu.manoil, vladimir.oltean, xiaoning.wang, andrew+netdev,
davem, edumazet, kuba, pabeni, robh, krzk+dt, conor+dt,
f.fainelli, frank.li, chleroy, horms, linux, andrew
Cc: netdev, linux-kernel, devicetree, linuxppc-dev, linux-arm-kernel,
imx
The ingress port filter table (IPFT )contains a set of filters each
capable of classifying incoming traffic using a mix of L2, L3, and L4
parsed and arbitrary field data. As a result of a filter match, several
actions can be specified such as on whether to deny or allow a frame,
overriding internal QoS attributes associated with the frame and setting
parameters for the subsequent frame processing functions, such as stream
identification, policing, ingress mirroring. Each entry corresponds to a
filter. The ingress port filter entries are added using a precedence
value. If a frame matches multiple entries, the entry with the higher
precedence is used. Currently, this patch only adds "Add" and "Delete"
operations to the ingress port filter table. These two interfaces will
be used by both ENETC driver and NETC switch driver.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
---
drivers/net/ethernet/freescale/enetc/ntmp.c | 76 +++++++++++++
.../ethernet/freescale/enetc/ntmp_private.h | 36 ++++++
include/linux/fsl/ntmp.h | 104 ++++++++++++++++++
3 files changed, 216 insertions(+)
diff --git a/drivers/net/ethernet/freescale/enetc/ntmp.c b/drivers/net/ethernet/freescale/enetc/ntmp.c
index 3c59b355c142..960d5be8ec42 100644
--- a/drivers/net/ethernet/freescale/enetc/ntmp.c
+++ b/drivers/net/ethernet/freescale/enetc/ntmp.c
@@ -20,6 +20,7 @@
/* Define NTMP Table ID */
#define NTMP_MAFT_ID 1
#define NTMP_RSST_ID 3
+#define NTMP_IPFT_ID 13
#define NTMP_FDBT_ID 15
#define NTMP_VFT_ID 18
#define NTMP_BPT_ID 41
@@ -234,6 +235,8 @@ static const char *ntmp_table_name(int tbl_id)
return "MAC Address Filter Table";
case NTMP_RSST_ID:
return "RSS Table";
+ case NTMP_IPFT_ID:
+ return "Ingress Port Filter Table";
case NTMP_FDBT_ID:
return "FDB Table";
case NTMP_VFT_ID:
@@ -468,6 +471,79 @@ int ntmp_rsst_query_entry(struct ntmp_user *user, u32 *table, int count)
}
EXPORT_SYMBOL_GPL(ntmp_rsst_query_entry);
+/**
+ * ntmp_ipft_add_entry - add an entry into the ingress port filter table
+ * @user: target ntmp_user struct
+ * @entry: the entry data, entry->cfge (configuration element data) and
+ * entry->keye (key element data) are used as input. Since the entry ID
+ * is assigned by the hardware, so entry->entry_id is a returned value
+ * for the driver to use, the driver can update/delete/query the entry
+ * based on the entry_id.
+ *
+ * Return: 0 on success, otherwise a negative error code
+ */
+int ntmp_ipft_add_entry(struct ntmp_user *user,
+ struct ipft_entry_data *entry)
+{
+ struct ntmp_dma_buf data = {
+ .dev = user->dev,
+ .size = sizeof(struct ipft_resp_query),
+ };
+ struct ipft_resp_query *resp;
+ struct ipft_req_ua *req;
+ union netc_cbd cbd;
+ u32 len;
+ int err;
+
+ err = ntmp_alloc_data_mem(&data, (void **)&req);
+ if (err)
+ return err;
+
+ ntmp_fill_crd(&req->crd, user->tbl.ipft_ver, NTMP_QA_ENTRY_ID,
+ NTMP_GEN_UA_CFGEU | NTMP_GEN_UA_STSEU);
+ req->ak.keye = entry->keye;
+ req->cfge = entry->cfge;
+
+ len = NTMP_LEN(sizeof(*req), data.size);
+ ntmp_fill_request_hdr(&cbd, data.dma, len, NTMP_IPFT_ID,
+ NTMP_CMD_AQ, NTMP_AM_TERNARY_KEY);
+
+ err = netc_xmit_ntmp_cmd(user, &cbd);
+ if (err) {
+ dev_err(user->dev, "Failed to add %s entry, err: %pe\n",
+ ntmp_table_name(NTMP_IPFT_ID), ERR_PTR(err));
+
+ goto end;
+ }
+
+ resp = (struct ipft_resp_query *)req;
+ entry->entry_id = le32_to_cpu(resp->entry_id);
+
+end:
+ ntmp_free_data_mem(&data);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(ntmp_ipft_add_entry);
+
+/**
+ * ntmp_ipft_delete_entry - delete a specified ingress port filter table entry
+ * @user: target ntmp_user struct
+ * @entry_id: the specified ID of the ingress port filter table entry
+ *
+ * Return: 0 on success, otherwise a negative error code
+ */
+int ntmp_ipft_delete_entry(struct ntmp_user *user, u32 entry_id)
+{
+ u32 req_len = sizeof(struct ipft_req_qd);
+
+ return ntmp_delete_entry_by_id(user, NTMP_IPFT_ID,
+ user->tbl.ipft_ver,
+ entry_id, req_len,
+ NTMP_STATUS_RESP_LEN);
+}
+EXPORT_SYMBOL_GPL(ntmp_ipft_delete_entry);
+
/**
* ntmp_fdbt_add_entry - add an entry into the FDB table
* @user: target ntmp_user struct
diff --git a/drivers/net/ethernet/freescale/enetc/ntmp_private.h b/drivers/net/ethernet/freescale/enetc/ntmp_private.h
index 7d50af7745c7..6d519d59a433 100644
--- a/drivers/net/ethernet/freescale/enetc/ntmp_private.h
+++ b/drivers/net/ethernet/freescale/enetc/ntmp_private.h
@@ -103,6 +103,42 @@ struct rsst_req_update {
u8 groups[];
};
+/* Ingress Port Filter Table Response Data Buffer Format of Query action */
+struct ipft_resp_query {
+ __le32 status;
+ __le32 entry_id;
+ struct ipft_keye_data keye;
+ __le64 match_count; /* STSE_DATA */
+ struct ipft_cfge_data cfge;
+} __packed;
+
+struct ipft_ak_eid {
+ __le32 entry_id;
+ __le32 resv[52];
+};
+
+union ipft_access_key {
+ struct ipft_ak_eid eid;
+ struct ipft_keye_data keye;
+};
+
+/* Ingress Port Filter Table Request Data Buffer Format of Update and
+ * Add actions
+ */
+struct ipft_req_ua {
+ struct ntmp_cmn_req_data crd;
+ union ipft_access_key ak;
+ struct ipft_cfge_data cfge;
+};
+
+/* Ingress Port Filter Table Request Data Buffer Format of Query and
+ * Delete actions
+ */
+struct ipft_req_qd {
+ struct ntmp_req_by_eid rbe;
+ __le32 resv[52];
+};
+
/* Access Key Format of FDB Table */
struct fdbt_ak_eid {
__le32 entry_id;
diff --git a/include/linux/fsl/ntmp.h b/include/linux/fsl/ntmp.h
index a54945dcdc61..efda35e5e22c 100644
--- a/include/linux/fsl/ntmp.h
+++ b/include/linux/fsl/ntmp.h
@@ -7,6 +7,7 @@
#include <linux/if_ether.h>
#define NTMP_NULL_ENTRY_ID 0xffffffffU
+#define IPFT_MAX_PLD_LEN 24
struct maft_keye_data {
u8 mac_addr[ETH_ALEN];
@@ -34,6 +35,7 @@ struct netc_tbl_vers {
u8 fdbt_ver;
u8 vft_ver;
u8 bpt_ver;
+ u8 ipft_ver;
};
struct netc_cbdr {
@@ -66,6 +68,94 @@ struct maft_entry_data {
struct maft_cfge_data cfge;
};
+struct ipft_pld_byte {
+ u8 data;
+ u8 mask;
+};
+
+struct ipft_keye_data {
+ __le16 precedence;
+ __le16 resv0[3];
+ __le16 frm_attr_flags;
+#define IPFT_FAF_OVLAN BIT(2)
+#define IPFT_FAF_IVLAN BIT(3)
+#define IPFT_FAF_IP_HDR BIT(7)
+#define IPFT_FAF_IP_VER6 BIT(8)
+#define IPFT_FAF_L4_CODE GENMASK(11, 10)
+#define IPFT_FAF_TCP_HDR 1
+#define IPFT_FAF_UDP_HDR 2
+#define IPFT_FAF_SCTP_HDR 3
+#define IPFT_FAF_WOL_MAGIC BIT(12)
+ __le16 frm_attr_flags_mask;
+ __le16 dscp;
+#define IPFT_DSCP GENMASK(5, 0)
+#define IPFT_DSCP_MASK GENMASK(11, 0)
+#define IPFT_DSCP_MASK_ALL 0x3f
+ __le16 src_port; /* This field is reserved for ENETC */
+#define IPFT_SRC_PORT GENMASK(4, 0)
+#define IPFT_SRC_PORT_MASK GENMASK(9, 5)
+#define IPFT_SRC_PORT_MASK_ALL 0x1f
+ __be16 outer_vlan_tci;
+ __be16 outer_vlan_tci_mask;
+ u8 dmac[ETH_ALEN];
+ u8 dmac_mask[ETH_ALEN];
+ u8 smac[ETH_ALEN];
+ u8 smac_mask[ETH_ALEN];
+ __be16 inner_vlan_tci;
+ __be16 inner_vlan_tci_mask;
+ __be16 ethertype;
+ __be16 ethertype_mask;
+ u8 ip_protocol;
+ u8 ip_protocol_mask;
+ __le16 resv1[7];
+ __be32 ip_src[4];
+ __le32 resv2[2];
+ __be32 ip_src_mask[4];
+ __be16 l4_src_port;
+ __be16 l4_src_port_mask;
+ __le32 resv3;
+ __be32 ip_dst[4];
+ __le32 resv4[2];
+ __be32 ip_dst_mask[4];
+ __be16 l4_dst_port;
+ __be16 l4_dst_port_mask;
+ __le32 resv5;
+ struct ipft_pld_byte byte[IPFT_MAX_PLD_LEN];
+};
+
+struct ipft_cfge_data {
+ __le32 cfg;
+#define IPFT_IPV GENMASK(3, 0)
+#define IPFT_OIPV BIT(4)
+#define IPFT_DR GENMASK(6, 5)
+#define IPFT_ODR BIT(7)
+#define IPFT_FLTFA GENMASK(10, 8)
+#define IPFT_FLTFA_DISCARD 0
+#define IPFT_FLTFA_PERMIT 1
+/* Redirect is only for switch */
+#define IPFT_FLTFA_REDIRECT 2
+#define IPFT_IMIRE BIT(11)
+#define IPFT_WOLTE BIT(12)
+#define IPFT_FLTA GENMASK(14, 13)
+#define IPFT_FLTA_RP 1
+#define IPFT_FLTA_IS 2
+#define IPFT_FLTA_SI_BITMAP 3
+#define IPFT_RPR GENMASK(16, 15)
+#define IPFT_CTD BIT(17)
+#define IPFT_HR GENMASK(21, 18)
+#define IPFT_TIMECAPE BIT(22)
+#define IPFT_RRT BIT(23)
+#define IPFT_BL2F BIT(24)
+#define IPFT_EVMEID GENMASK(31, 28)
+ __le32 flta_tgt;
+};
+
+struct ipft_entry_data {
+ u32 entry_id; /* hardware assigns entry ID */
+ struct ipft_keye_data keye;
+ struct ipft_cfge_data cfge;
+};
+
struct fdbt_keye_data {
u8 mac_addr[ETH_ALEN]; /* big-endian */
__le16 resv0;
@@ -155,6 +245,9 @@ int ntmp_rsst_update_entry(struct ntmp_user *user, const u32 *table,
int count);
int ntmp_rsst_query_entry(struct ntmp_user *user,
u32 *table, int count);
+int ntmp_ipft_add_entry(struct ntmp_user *user,
+ struct ipft_entry_data *entry);
+int ntmp_ipft_delete_entry(struct ntmp_user *user, u32 entry_id);
int ntmp_fdbt_add_entry(struct ntmp_user *user, u32 *entry_id,
const struct fdbt_keye_data *keye,
const struct fdbt_cfge_data *cfge);
@@ -208,6 +301,17 @@ static inline int ntmp_rsst_query_entry(struct ntmp_user *user,
return 0;
}
+static inline int ntmp_ipft_add_entry(struct ntmp_user *user,
+ struct ipft_entry_data *entry)
+{
+ return 0;
+}
+
+static inline int ntmp_ipft_delete_entry(struct ntmp_user *user, u32 entry_id)
+{
+ return 0;
+}
+
static inline int ntmp_fdbt_add_entry(struct ntmp_user *user, u32 *entry_id,
const struct fdbt_keye_data *keye,
const struct fdbt_cfge_data *data)
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v3 net-next 08/14] net: enetc: add multiple command BD rings support
2026-03-26 6:29 [PATCH v3 net-next 00/14] Add preliminary NETC switch support for i.MX94 Wei Fang
` (6 preceding siblings ...)
2026-03-26 6:29 ` [PATCH v3 net-next 07/14] net: enetc: add support for "Add" and "Delete" operations to IPFT Wei Fang
@ 2026-03-26 6:29 ` Wei Fang
2026-03-26 6:29 ` [PATCH v3 net-next 09/14] net: dsa: add NETC switch tag support Wei Fang
` (5 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Wei Fang @ 2026-03-26 6:29 UTC (permalink / raw)
To: claudiu.manoil, vladimir.oltean, xiaoning.wang, andrew+netdev,
davem, edumazet, kuba, pabeni, robh, krzk+dt, conor+dt,
f.fainelli, frank.li, chleroy, horms, linux, andrew
Cc: netdev, linux-kernel, devicetree, linuxppc-dev, linux-arm-kernel,
imx
All the tables of NETC switch are managed through the command BD ring,
but unlike ENETC, the switch has two command BD rings, if the current
ring is busy, the switch driver can switch to another ring to manage
the table. Currently, the NTMP driver does not support multiple rings.
Therefore, netc_select_cbdr() is added to select a appropriate ring to
execute the command for the switch.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
---
drivers/net/ethernet/freescale/enetc/ntmp.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/freescale/enetc/ntmp.c b/drivers/net/ethernet/freescale/enetc/ntmp.c
index 960d5be8ec42..5679b866af48 100644
--- a/drivers/net/ethernet/freescale/enetc/ntmp.c
+++ b/drivers/net/ethernet/freescale/enetc/ntmp.c
@@ -125,12 +125,21 @@ static int netc_xmit_ntmp_cmd(struct ntmp_user *user, union netc_cbd *cbd)
u16 status;
u32 val;
- /* Currently only i.MX95 ENETC is supported, and it only has one
- * command BD ring
+ for (i = 0; i < user->cbdr_num; i++) {
+ cbdr = &user->ring[i];
+ if (spin_trylock_bh(&cbdr->ring_lock))
+ break;
+ }
+
+ /* If all command BD rings are locked, we need to select
+ * one of them and wait for it.
*/
- cbdr = &user->ring[0];
+ if (i == user->cbdr_num) {
+ int cpu = raw_smp_processor_id();
- spin_lock_bh(&cbdr->ring_lock);
+ cbdr = &user->ring[cpu % user->cbdr_num];
+ spin_lock_bh(&cbdr->ring_lock);
+ }
if (unlikely(!ntmp_get_free_cbd_num(cbdr)))
ntmp_clean_cbdr(cbdr);
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v3 net-next 09/14] net: dsa: add NETC switch tag support
2026-03-26 6:29 [PATCH v3 net-next 00/14] Add preliminary NETC switch support for i.MX94 Wei Fang
` (7 preceding siblings ...)
2026-03-26 6:29 ` [PATCH v3 net-next 08/14] net: enetc: add multiple command BD rings support Wei Fang
@ 2026-03-26 6:29 ` Wei Fang
2026-03-26 6:29 ` [PATCH v3 net-next 10/14] net: dsa: netc: introduce NXP NETC switch driver for i.MX94 Wei Fang
` (4 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Wei Fang @ 2026-03-26 6:29 UTC (permalink / raw)
To: claudiu.manoil, vladimir.oltean, xiaoning.wang, andrew+netdev,
davem, edumazet, kuba, pabeni, robh, krzk+dt, conor+dt,
f.fainelli, frank.li, chleroy, horms, linux, andrew
Cc: netdev, linux-kernel, devicetree, linuxppc-dev, linux-arm-kernel,
imx
The NXP NETC switch tag is a proprietary header added to frames after the
source MAC address. The switch tag has 3 types, and each type has 1 ~ 4
subtypes, the details are as follows.
Forward NXP switch tag (Type=0): Represents forwarded frames.
- SubType = 0 - Normal frame processing.
To_Port NXP switch tag (Type=1): Represents frames that are to be sent
to a specific switch port.
- SubType = 0. No request to perform timestamping.
- SubType = 1. Request to perform one-step timestamping.
- SubType = 2. Request to perform two-step timestamping.
- SubType = 3. Request to perform both one-step timestamping and
two-step timestamping.
To_Host NXP switch tag (Type=2): Represents frames redirected or copied
to the switch management port.
- SubType = 0. Received frames redirected or copied to the switch
management port.
- SubType = 1. Received frames redirected or copied to the switch
management port with captured timestamp at the switch port where
the frame was received.
- SubType = 2. Transmit timestamp response (two-step timestamping).
In addition, the length of different type switch tag is different, the
minimum length is 6 bytes, the maximum length is 14 bytes. Currently,
Forward tag, SubType 0 of To_Port tag and Subtype 0 of To_Host tag are
supported. More tags will be supported in the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
---
include/linux/dsa/tag_netc.h | 14 +++
include/net/dsa.h | 2 +
include/uapi/linux/if_ether.h | 1 +
net/dsa/Kconfig | 10 ++
net/dsa/Makefile | 1 +
net/dsa/tag_netc.c | 185 ++++++++++++++++++++++++++++++++++
6 files changed, 213 insertions(+)
create mode 100644 include/linux/dsa/tag_netc.h
create mode 100644 net/dsa/tag_netc.c
diff --git a/include/linux/dsa/tag_netc.h b/include/linux/dsa/tag_netc.h
new file mode 100644
index 000000000000..fe964722e5b0
--- /dev/null
+++ b/include/linux/dsa/tag_netc.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright 2025-2026 NXP
+ */
+
+#ifndef __NET_DSA_TAG_NETC_H
+#define __NET_DSA_TAG_NETC_H
+
+#include <linux/skbuff.h>
+#include <net/dsa.h>
+
+#define NETC_TAG_MAX_LEN 14
+
+#endif
diff --git a/include/net/dsa.h b/include/net/dsa.h
index 6c17446f3dcc..6bed824d1f07 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -58,6 +58,7 @@ struct tc_action;
#define DSA_TAG_PROTO_YT921X_VALUE 30
#define DSA_TAG_PROTO_MXL_GSW1XX_VALUE 31
#define DSA_TAG_PROTO_MXL862_VALUE 32
+#define DSA_TAG_PROTO_NETC_VALUE 33
enum dsa_tag_protocol {
DSA_TAG_PROTO_NONE = DSA_TAG_PROTO_NONE_VALUE,
@@ -93,6 +94,7 @@ enum dsa_tag_protocol {
DSA_TAG_PROTO_YT921X = DSA_TAG_PROTO_YT921X_VALUE,
DSA_TAG_PROTO_MXL_GSW1XX = DSA_TAG_PROTO_MXL_GSW1XX_VALUE,
DSA_TAG_PROTO_MXL862 = DSA_TAG_PROTO_MXL862_VALUE,
+ DSA_TAG_PROTO_NETC = DSA_TAG_PROTO_NETC_VALUE,
};
struct dsa_switch;
diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h
index df9d44a11540..fb5efc8e06cc 100644
--- a/include/uapi/linux/if_ether.h
+++ b/include/uapi/linux/if_ether.h
@@ -123,6 +123,7 @@
#define ETH_P_DSA_A5PSW 0xE001 /* A5PSW Tag Value [ NOT AN OFFICIALLY REGISTERED ID ] */
#define ETH_P_IFE 0xED3E /* ForCES inter-FE LFB type */
#define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */
+#define ETH_P_NXP_NETC 0xFD3A /* NXP NETC DSA [ NOT AN OFFICIALLY REGISTERED ID ] */
#define ETH_P_802_3_MIN 0x0600 /* If the value in the ethernet type is more than this value
* then the frame is Ethernet II. Else it is 802.3 */
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
index 5ed8c704636d..d5e725b90d78 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -125,6 +125,16 @@ config NET_DSA_TAG_KSZ
Say Y if you want to enable support for tagging frames for the
Microchip 8795/937x/9477/9893 families of switches.
+config NET_DSA_TAG_NETC
+ tristate "Tag driver for NXP NETC switches"
+ help
+ Say Y or M if you want to enable support for the NXP Switch Tag (NST),
+ as implemented by NXP NETC switches having version 4.3 or later. The
+ switch tag is a proprietary header added to frames after the source
+ MAC address, it has 3 types and each type has different subtypes, so
+ its length depends on the type and subtype of the tag, the maximum
+ length is 14 bytes.
+
config NET_DSA_TAG_OCELOT
tristate "Tag driver for Ocelot family of switches, using NPI port"
select PACKING
diff --git a/net/dsa/Makefile b/net/dsa/Makefile
index bf7247759a64..b8c2667cd14a 100644
--- a/net/dsa/Makefile
+++ b/net/dsa/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_NET_DSA_TAG_LAN9303) += tag_lan9303.o
obj-$(CONFIG_NET_DSA_TAG_MTK) += tag_mtk.o
obj-$(CONFIG_NET_DSA_TAG_MXL_862XX) += tag_mxl862xx.o
obj-$(CONFIG_NET_DSA_TAG_MXL_GSW1XX) += tag_mxl-gsw1xx.o
+obj-$(CONFIG_NET_DSA_TAG_NETC) += tag_netc.o
obj-$(CONFIG_NET_DSA_TAG_NONE) += tag_none.o
obj-$(CONFIG_NET_DSA_TAG_OCELOT) += tag_ocelot.o
obj-$(CONFIG_NET_DSA_TAG_OCELOT_8021Q) += tag_ocelot_8021q.o
diff --git a/net/dsa/tag_netc.c b/net/dsa/tag_netc.c
new file mode 100644
index 000000000000..addd41f7f1b6
--- /dev/null
+++ b/net/dsa/tag_netc.c
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2025-2026 NXP
+ */
+
+#include <linux/dsa/tag_netc.h>
+
+#include "tag.h"
+
+#define NETC_NAME "nxp_netc"
+
+/* Forward NXP switch tag */
+#define NETC_TAG_FORWARD 0
+
+/* To_Port NXP switch tag */
+#define NETC_TAG_TO_PORT 1
+/* SubType0: No request to perform timestamping */
+#define NETC_TAG_TP_SUBTYPE0 0
+
+/* To_Host NXP switch tag */
+#define NETC_TAG_TO_HOST 2
+/* SubType0: frames redirected or copied to CPU port */
+#define NETC_TAG_TH_SUBTYPE0 0
+/* SubType1: frames redirected or copied to CPU port with timestamp */
+#define NETC_TAG_TH_SUBTYPE1 1
+/* SubType2: Transmit timestamp response (two-step timestamping) */
+#define NETC_TAG_TH_SUBTYPE2 2
+
+/* NETC switch tag lengths */
+#define NETC_TAG_FORWARD_LEN 6
+#define NETC_TAG_TP_SUBTYPE0_LEN 6
+#define NETC_TAG_TH_SUBTYPE0_LEN 6
+#define NETC_TAG_TH_SUBTYPE1_LEN 14
+#define NETC_TAG_TH_SUBTYPE2_LEN 14
+#define NETC_TAG_CMN_LEN 5
+
+#define NETC_TAG_SUBTYPE GENMASK(3, 0)
+#define NETC_TAG_TYPE GENMASK(7, 4)
+#define NETC_TAG_QV BIT(0)
+#define NETC_TAG_IPV GENMASK(4, 2)
+#define NETC_TAG_SWITCH GENMASK(2, 0)
+#define NETC_TAG_PORT GENMASK(7, 3)
+
+struct netc_tag_cmn {
+ __be16 tpid;
+ u8 type;
+ u8 qos;
+ u8 switch_port;
+} __packed;
+
+static void netc_fill_common_tag(struct netc_tag_cmn *tag, u8 type,
+ u8 subtype, u8 sw_id, u8 port, u8 ipv)
+{
+ tag->tpid = htons(ETH_P_NXP_NETC);
+ tag->type = FIELD_PREP(NETC_TAG_TYPE, type) |
+ FIELD_PREP(NETC_TAG_SUBTYPE, subtype);
+ tag->qos = NETC_TAG_QV | FIELD_PREP(NETC_TAG_IPV, ipv);
+ tag->switch_port = FIELD_PREP(NETC_TAG_SWITCH, sw_id) |
+ FIELD_PREP(NETC_TAG_PORT, port);
+}
+
+static void *netc_fill_common_tp_tag(struct sk_buff *skb,
+ struct net_device *ndev,
+ u8 subtype, int tag_len)
+{
+ struct dsa_port *dp = dsa_user_to_port(ndev);
+ u16 queue = skb_get_queue_mapping(skb);
+ u8 ipv = netdev_txq_to_tc(ndev, queue);
+ void *tag;
+
+ skb_push(skb, tag_len);
+ dsa_alloc_etype_header(skb, tag_len);
+
+ tag = dsa_etype_header_pos_tx(skb);
+ memset(tag + NETC_TAG_CMN_LEN, 0, tag_len - NETC_TAG_CMN_LEN);
+ netc_fill_common_tag(tag, NETC_TAG_TO_PORT, subtype,
+ dp->ds->index, dp->index, ipv);
+
+ return tag;
+}
+
+static void netc_fill_tp_tag_subtype0(struct sk_buff *skb,
+ struct net_device *ndev)
+{
+ netc_fill_common_tp_tag(skb, ndev, NETC_TAG_TP_SUBTYPE0,
+ NETC_TAG_TP_SUBTYPE0_LEN);
+}
+
+/* Currently only support To_Port tag, subtype 0 */
+static struct sk_buff *netc_xmit(struct sk_buff *skb,
+ struct net_device *ndev)
+{
+ netc_fill_tp_tag_subtype0(skb, ndev);
+
+ return skb;
+}
+
+static int netc_get_rx_tag_len(int rx_type)
+{
+ int type = FIELD_GET(NETC_TAG_TYPE, rx_type);
+
+ if (type == NETC_TAG_TO_HOST) {
+ u8 subtype = rx_type & NETC_TAG_SUBTYPE;
+
+ if (subtype == NETC_TAG_TH_SUBTYPE1)
+ return NETC_TAG_TH_SUBTYPE1_LEN;
+ else if (subtype == NETC_TAG_TH_SUBTYPE2)
+ return NETC_TAG_TH_SUBTYPE2_LEN;
+ else
+ return NETC_TAG_TH_SUBTYPE0_LEN;
+ }
+
+ return NETC_TAG_FORWARD_LEN;
+}
+
+static struct sk_buff *netc_rcv(struct sk_buff *skb,
+ struct net_device *ndev)
+{
+ struct netc_tag_cmn *tag_cmn;
+ int tag_len, sw_id, port;
+
+ if (unlikely(!pskb_may_pull(skb, NETC_TAG_MAX_LEN)))
+ return NULL;
+
+ tag_cmn = dsa_etype_header_pos_rx(skb);
+ tag_len = netc_get_rx_tag_len(tag_cmn->type);
+
+ if (ntohs(tag_cmn->tpid) != ETH_P_NXP_NETC) {
+ dev_warn_ratelimited(&ndev->dev, "Unknown TPID 0x%04x\n",
+ ntohs(tag_cmn->tpid));
+
+ return NULL;
+ }
+
+ if (tag_cmn->qos & NETC_TAG_QV)
+ skb->priority = FIELD_GET(NETC_TAG_IPV, tag_cmn->qos);
+
+ sw_id = NETC_TAG_SWITCH & tag_cmn->switch_port;
+ /* ENETC VEPA switch ID (0) is not supported yet */
+ if (!sw_id) {
+ dev_warn_ratelimited(&ndev->dev,
+ "VEPA switch ID is not supported yet\n");
+
+ return NULL;
+ }
+
+ port = FIELD_GET(NETC_TAG_PORT, tag_cmn->switch_port);
+ skb->dev = dsa_conduit_find_user(ndev, sw_id, port);
+ if (!skb->dev)
+ return NULL;
+
+ if (tag_cmn->type == NETC_TAG_FORWARD)
+ dsa_default_offload_fwd_mark(skb);
+
+ /* Remove Switch tag from the frame */
+ skb_pull_rcsum(skb, tag_len);
+ dsa_strip_etype_header(skb, tag_len);
+
+ return skb;
+}
+
+static void netc_flow_dissect(const struct sk_buff *skb, __be16 *proto,
+ int *offset)
+{
+ struct netc_tag_cmn *tag_cmn = (struct netc_tag_cmn *)(skb->data - 2);
+ int tag_len = netc_get_rx_tag_len(tag_cmn->type);
+
+ *offset = tag_len;
+ *proto = ((__be16 *)skb->data)[(tag_len / 2) - 1];
+}
+
+static const struct dsa_device_ops netc_netdev_ops = {
+ .name = NETC_NAME,
+ .proto = DSA_TAG_PROTO_NETC,
+ .xmit = netc_xmit,
+ .rcv = netc_rcv,
+ .needed_headroom = NETC_TAG_MAX_LEN,
+ .flow_dissect = netc_flow_dissect,
+};
+
+MODULE_DESCRIPTION("DSA tag driver for NXP NETC switch family");
+MODULE_LICENSE("GPL");
+
+MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_NETC, NETC_NAME);
+module_dsa_tag_driver(netc_netdev_ops);
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v3 net-next 10/14] net: dsa: netc: introduce NXP NETC switch driver for i.MX94
2026-03-26 6:29 [PATCH v3 net-next 00/14] Add preliminary NETC switch support for i.MX94 Wei Fang
` (8 preceding siblings ...)
2026-03-26 6:29 ` [PATCH v3 net-next 09/14] net: dsa: add NETC switch tag support Wei Fang
@ 2026-03-26 6:29 ` Wei Fang
2026-03-26 6:29 ` [PATCH v3 net-next 11/14] net: dsa: netc: add phylink MAC operations Wei Fang
` (3 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Wei Fang @ 2026-03-26 6:29 UTC (permalink / raw)
To: claudiu.manoil, vladimir.oltean, xiaoning.wang, andrew+netdev,
davem, edumazet, kuba, pabeni, robh, krzk+dt, conor+dt,
f.fainelli, frank.li, chleroy, horms, linux, andrew
Cc: netdev, linux-kernel, devicetree, linuxppc-dev, linux-arm-kernel,
imx
For i.MX94 series, the NETC IP provides full 802.1Q Ethernet switch
functionality, advanced QoS with 8 traffic classes, and a full range of
TSN standards capabilities. The switch has 3 user ports and 1 CPU port,
the CPU port is connected to an internal ENETC. Since the switch and the
internal ENETC are fully integrated within the NETC IP, no back-to-back
MAC connection is required. Instead, a light-weight "pseudo MAC" is used
between the switch and the ENETC. This translates to lower power (less
logic and memory) and lower delay (as there is no serialization delay
across this link).
This patch introduces the initial NETC switch driver. At this stage,
only basic probe and remove functionality is supported. More features
will be supported in the subsequent patches.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
---
MAINTAINERS | 11 +
drivers/net/dsa/Kconfig | 3 +
drivers/net/dsa/Makefile | 1 +
drivers/net/dsa/netc/Kconfig | 14 +
drivers/net/dsa/netc/Makefile | 3 +
drivers/net/dsa/netc/netc_main.c | 672 ++++++++++++++++++++++++++
drivers/net/dsa/netc/netc_platform.c | 49 ++
drivers/net/dsa/netc/netc_switch.h | 92 ++++
drivers/net/dsa/netc/netc_switch_hw.h | 137 ++++++
9 files changed, 982 insertions(+)
create mode 100644 drivers/net/dsa/netc/Kconfig
create mode 100644 drivers/net/dsa/netc/Makefile
create mode 100644 drivers/net/dsa/netc/netc_main.c
create mode 100644 drivers/net/dsa/netc/netc_platform.c
create mode 100644 drivers/net/dsa/netc/netc_switch.h
create mode 100644 drivers/net/dsa/netc/netc_switch_hw.h
diff --git a/MAINTAINERS b/MAINTAINERS
index a09bf30a057d..fe744320b1e5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19083,6 +19083,17 @@ F: Documentation/devicetree/bindings/clock/*imx*
F: drivers/clk/imx/
F: include/dt-bindings/clock/*imx*
+NXP NETC ETHERNET SWITCH DRIVER
+M: Wei Fang <wei.fang@nxp.com>
+R: Clark Wang <xiaoning.wang@nxp.com>
+L: imx@lists.linux.dev
+L: netdev@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/net/dsa/nxp,netc-switch.yaml
+F: drivers/net/dsa/netc/
+F: include/linux/dsa/tag_netc.h
+F: net/dsa/tag_netc.c
+
NXP NETC TIMER PTP CLOCK DRIVER
M: Wei Fang <wei.fang@nxp.com>
M: Clark Wang <xiaoning.wang@nxp.com>
diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig
index 39fb8ead16b5..e9c7a6874791 100644
--- a/drivers/net/dsa/Kconfig
+++ b/drivers/net/dsa/Kconfig
@@ -74,8 +74,11 @@ source "drivers/net/dsa/microchip/Kconfig"
source "drivers/net/dsa/mv88e6xxx/Kconfig"
+
source "drivers/net/dsa/mxl862xx/Kconfig"
+source "drivers/net/dsa/netc/Kconfig"
+
source "drivers/net/dsa/ocelot/Kconfig"
source "drivers/net/dsa/qca/Kconfig"
diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile
index f5a463b87ec2..d2975badffc0 100644
--- a/drivers/net/dsa/Makefile
+++ b/drivers/net/dsa/Makefile
@@ -21,6 +21,7 @@ obj-y += lantiq/
obj-y += microchip/
obj-y += mv88e6xxx/
obj-y += mxl862xx/
+obj-y += netc/
obj-y += ocelot/
obj-y += qca/
obj-y += realtek/
diff --git a/drivers/net/dsa/netc/Kconfig b/drivers/net/dsa/netc/Kconfig
new file mode 100644
index 000000000000..8824d30ed3ea
--- /dev/null
+++ b/drivers/net/dsa/netc/Kconfig
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config NET_DSA_NETC_SWITCH
+ tristate "NXP NETC Ethernet switch support"
+ depends on NET_DSA && PCI
+ select NET_DSA_TAG_NETC
+ select FSL_ENETC_MDIO
+ select NXP_NTMP
+ select NXP_NETC_LIB
+ help
+ This driver supports the NXP NETC Ethernet switch, which is embedded
+ as a PCIe function of the NXP NETC IP. But note that this driver does
+ only support switch versions greater than or equal to NETC v4.3.
+
+ If compiled as module (M), the module name is nxp-netc-switch.
diff --git a/drivers/net/dsa/netc/Makefile b/drivers/net/dsa/netc/Makefile
new file mode 100644
index 000000000000..4a5767562574
--- /dev/null
+++ b/drivers/net/dsa/netc/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_NET_DSA_NETC_SWITCH) += nxp-netc-switch.o
+nxp-netc-switch-objs := netc_main.o netc_platform.o
diff --git a/drivers/net/dsa/netc/netc_main.c b/drivers/net/dsa/netc/netc_main.c
new file mode 100644
index 000000000000..5828fd3e342e
--- /dev/null
+++ b/drivers/net/dsa/netc/netc_main.c
@@ -0,0 +1,672 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * NXP NETC switch driver
+ * Copyright 2025-2026 NXP
+ */
+
+#include <linux/clk.h>
+#include <linux/etherdevice.h>
+#include <linux/fsl/enetc_mdio.h>
+#include <linux/if_vlan.h>
+#include <linux/of_mdio.h>
+
+#include "netc_switch.h"
+
+static enum dsa_tag_protocol
+netc_get_tag_protocol(struct dsa_switch *ds, int port,
+ enum dsa_tag_protocol mprot)
+{
+ return DSA_TAG_PROTO_NETC;
+}
+
+static void netc_port_rmw(struct netc_port *np, u32 reg,
+ u32 mask, u32 val)
+{
+ u32 old, new;
+
+ WARN_ON((mask | val) != mask);
+
+ old = netc_port_rd(np, reg);
+ new = (old & ~mask) | val;
+ if (new == old)
+ return;
+
+ netc_port_wr(np, reg, new);
+}
+
+static void netc_mac_port_wr(struct netc_port *np, u32 reg, u32 val)
+{
+ if (is_netc_pseudo_port(np))
+ return;
+
+ netc_port_wr(np, reg, val);
+ if (np->caps.pmac)
+ netc_port_wr(np, reg + NETC_PMAC_OFFSET, val);
+}
+
+static void netc_mac_port_rmw(struct netc_port *np, u32 reg,
+ u32 mask, u32 val)
+{
+ u32 old, new;
+
+ if (is_netc_pseudo_port(np))
+ return;
+
+ WARN_ON((mask | val) != mask);
+
+ old = netc_port_rd(np, reg);
+ new = (old & ~mask) | val;
+ if (new == old)
+ return;
+
+ netc_port_wr(np, reg, new);
+ if (np->caps.pmac)
+ netc_port_wr(np, reg + NETC_PMAC_OFFSET, new);
+}
+
+static void netc_port_get_capability(struct netc_port *np)
+{
+ u32 val;
+
+ val = netc_port_rd(np, NETC_PMCAPR);
+ if (val & PMCAPR_HD)
+ np->caps.half_duplex = true;
+
+ if (FIELD_GET(PMCAPR_FP, val) == FP_SUPPORT)
+ np->caps.pmac = true;
+
+ val = netc_port_rd(np, NETC_PCAPR);
+ if (val & PCAPR_LINK_TYPE)
+ np->caps.pseudo_link = true;
+}
+
+static int netc_port_get_info_from_dt(struct netc_port *np,
+ struct device_node *node,
+ struct device *dev)
+{
+ if (of_find_property(node, "clock-names", NULL)) {
+ np->ref_clk = devm_get_clk_from_child(dev, node, "ref");
+ if (IS_ERR(np->ref_clk)) {
+ dev_err(dev, "Port %d cannot get reference clock\n",
+ np->dp->index);
+ return PTR_ERR(np->ref_clk);
+ }
+ }
+
+ return 0;
+}
+
+static int netc_port_create_emdio_bus(struct netc_port *np,
+ struct device_node *node)
+{
+ struct netc_switch *priv = np->switch_priv;
+ struct enetc_mdio_priv *mdio_priv;
+ struct device *dev = priv->dev;
+ struct enetc_hw *hw;
+ struct mii_bus *bus;
+ int err;
+
+ hw = enetc_hw_alloc(dev, np->iobase);
+ if (IS_ERR(hw))
+ return dev_err_probe(dev, PTR_ERR(hw),
+ "Failed to allocate enetc_hw\n");
+
+ bus = devm_mdiobus_alloc_size(dev, sizeof(*mdio_priv));
+ if (!bus)
+ return -ENOMEM;
+
+ bus->name = "NXP NETC switch external MDIO Bus";
+ bus->read = enetc_mdio_read_c22;
+ bus->write = enetc_mdio_write_c22;
+ bus->read_c45 = enetc_mdio_read_c45;
+ bus->write_c45 = enetc_mdio_write_c45;
+ bus->parent = dev;
+ mdio_priv = bus->priv;
+ mdio_priv->hw = hw;
+ mdio_priv->mdio_base = NETC_EMDIO_BASE;
+ snprintf(bus->id, MII_BUS_ID_SIZE, "%s-p%d-emdio",
+ dev_name(dev), np->dp->index);
+
+ err = devm_of_mdiobus_register(dev, bus, node);
+ if (err)
+ return dev_err_probe(dev, err,
+ "Cannot register EMDIO bus\n");
+
+ np->emdio = bus;
+
+ return 0;
+}
+
+static int netc_port_create_mdio_bus(struct netc_port *np,
+ struct device_node *node)
+{
+ struct device_node *mdio_node;
+ int err;
+
+ mdio_node = of_get_child_by_name(node, "mdio");
+ if (mdio_node) {
+ err = netc_port_create_emdio_bus(np, mdio_node);
+ of_node_put(mdio_node);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+static int netc_init_switch_id(struct netc_switch *priv)
+{
+ struct netc_switch_regs *regs = &priv->regs;
+ struct dsa_switch *ds = priv->ds;
+
+ /* The value of 0 is reserved for the VEPA switch and cannot
+ * be used.
+ */
+ if (ds->index > SWCR_SWID || !ds->index) {
+ dev_err(priv->dev, "Switch index %d out of range\n",
+ ds->index);
+ return -ERANGE;
+ }
+
+ netc_base_wr(regs, NETC_SWCR, ds->index);
+
+ return 0;
+}
+
+static int netc_init_all_ports(struct netc_switch *priv)
+{
+ struct device *dev = priv->dev;
+ struct netc_port *np;
+ struct dsa_port *dp;
+ int err;
+
+ priv->ports = devm_kcalloc(dev, priv->info->num_ports,
+ sizeof(struct netc_port *),
+ GFP_KERNEL);
+ if (!priv->ports)
+ return -ENOMEM;
+
+ /* Some DSA interfaces may set the port even it is disabled, such
+ * as .port_disable(), .port_stp_state_set() and so on. To avoid
+ * crash caused by accessing NULL port pointer, each port is
+ * allocated its own memory. Otherwise, we need to check whether
+ * the port pointer is NULL in these interfaces. The latter is
+ * difficult for us to cover.
+ */
+ for (int i = 0; i < priv->info->num_ports; i++) {
+ np = devm_kzalloc(dev, sizeof(*np), GFP_KERNEL);
+ if (!np)
+ return -ENOMEM;
+
+ np->switch_priv = priv;
+ np->iobase = priv->regs.port + PORT_IOBASE(i);
+ netc_port_get_capability(np);
+ priv->ports[i] = np;
+ }
+
+ dsa_switch_for_each_available_port(dp, priv->ds) {
+ np = priv->ports[dp->index];
+ np->dp = dp;
+ err = netc_port_get_info_from_dt(np, dp->dn, dev);
+ if (err)
+ return err;
+
+ if (dsa_port_is_user(dp)) {
+ err = netc_port_create_mdio_bus(np, dp->dn);
+ if (err) {
+ dev_err(dev, "Failed to create MDIO bus\n");
+ return err;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static void netc_init_ntmp_tbl_versions(struct netc_switch *priv)
+{
+ struct ntmp_user *ntmp = &priv->ntmp;
+
+ /* All tables default to version 0 */
+ memset(&ntmp->tbl, 0, sizeof(ntmp->tbl));
+}
+
+static int netc_init_all_cbdrs(struct netc_switch *priv)
+{
+ struct netc_switch_regs *regs = &priv->regs;
+ struct ntmp_user *ntmp = &priv->ntmp;
+ int i, err;
+
+ ntmp->cbdr_num = NETC_CBDR_NUM;
+ ntmp->dev = priv->dev;
+ ntmp->ring = devm_kcalloc(ntmp->dev, ntmp->cbdr_num,
+ sizeof(struct netc_cbdr),
+ GFP_KERNEL);
+ if (!ntmp->ring)
+ return -ENOMEM;
+
+ for (i = 0; i < ntmp->cbdr_num; i++) {
+ struct netc_cbdr *cbdr = &ntmp->ring[i];
+ struct netc_cbdr_regs cbdr_regs;
+
+ cbdr_regs.pir = regs->base + NETC_CBDRPIR(i);
+ cbdr_regs.cir = regs->base + NETC_CBDRCIR(i);
+ cbdr_regs.mr = regs->base + NETC_CBDRMR(i);
+ cbdr_regs.bar0 = regs->base + NETC_CBDRBAR0(i);
+ cbdr_regs.bar1 = regs->base + NETC_CBDRBAR1(i);
+ cbdr_regs.lenr = regs->base + NETC_CBDRLENR(i);
+
+ err = ntmp_init_cbdr(cbdr, ntmp->dev, &cbdr_regs);
+ if (err)
+ goto free_cbdrs;
+ }
+
+ return 0;
+
+free_cbdrs:
+ for (i--; i >= 0; i--)
+ ntmp_free_cbdr(&ntmp->ring[i]);
+
+ return err;
+}
+
+static void netc_remove_all_cbdrs(struct netc_switch *priv)
+{
+ struct ntmp_user *ntmp = &priv->ntmp;
+
+ for (int i = 0; i < NETC_CBDR_NUM; i++)
+ ntmp_free_cbdr(&ntmp->ring[i]);
+}
+
+static int netc_init_ntmp_user(struct netc_switch *priv)
+{
+ netc_init_ntmp_tbl_versions(priv);
+
+ return netc_init_all_cbdrs(priv);
+}
+
+static void netc_free_ntmp_user(struct netc_switch *priv)
+{
+ netc_remove_all_cbdrs(priv);
+}
+
+static void netc_switch_dos_default_config(struct netc_switch *priv)
+{
+ struct netc_switch_regs *regs = &priv->regs;
+ u32 val;
+
+ val = DOSL2CR_SAMEADDR | DOSL2CR_MSAMCC;
+ netc_base_wr(regs, NETC_DOSL2CR, val);
+
+ val = DOSL3CR_SAMEADDR | DOSL3CR_IPSAMCC;
+ netc_base_wr(regs, NETC_DOSL3CR, val);
+}
+
+static void netc_switch_vfht_default_config(struct netc_switch *priv)
+{
+ struct netc_switch_regs *regs = &priv->regs;
+ u32 val;
+
+ val = netc_base_rd(regs, NETC_VFHTDECR2);
+
+ /* if no match is found in the VLAN Filter table, then VFHTDECR2[MLO]
+ * will take effect. VFHTDECR2[MLO] is set to "Software MAC learning
+ * secure" by default. Notice BPCR[MLO] will override VFHTDECR2[MLO]
+ * if its value is not zero.
+ */
+ val = u32_replace_bits(val, MLO_SW_SEC, VFHTDECR2_MLO);
+ val = u32_replace_bits(val, MFO_NO_MATCH_DISCARD, VFHTDECR2_MFO);
+ netc_base_wr(regs, NETC_VFHTDECR2, val);
+}
+
+static void netc_port_set_max_frame_size(struct netc_port *np,
+ u32 max_frame_size)
+{
+ netc_mac_port_wr(np, NETC_PM_MAXFRM(0),
+ PM_MAXFRAM & max_frame_size);
+}
+
+static void netc_switch_fixed_config(struct netc_switch *priv)
+{
+ netc_switch_dos_default_config(priv);
+ netc_switch_vfht_default_config(priv);
+}
+
+static void netc_port_set_tc_max_sdu(struct netc_port *np,
+ int tc, u32 max_sdu)
+{
+ u32 val = max_sdu & PTCTMSDUR_MAXSDU;
+
+ val |= FIELD_PREP(PTCTMSDUR_SDU_TYPE, SDU_TYPE_MPDU);
+ netc_port_wr(np, NETC_PTCTMSDUR(tc), val);
+}
+
+static void netc_port_set_all_tc_msdu(struct netc_port *np)
+{
+ for (int tc = 0; tc < NETC_TC_NUM; tc++)
+ netc_port_set_tc_max_sdu(np, tc, NETC_MAX_FRAME_LEN);
+}
+
+static void netc_port_set_mlo(struct netc_port *np, enum netc_mlo mlo)
+{
+ netc_port_rmw(np, NETC_BPCR, BPCR_MLO, FIELD_PREP(BPCR_MLO, mlo));
+}
+
+static void netc_port_fixed_config(struct netc_port *np)
+{
+ /* Default IPV and DR setting */
+ netc_port_rmw(np, NETC_PQOSMR, PQOSMR_VS | PQOSMR_VE,
+ PQOSMR_VS | PQOSMR_VE);
+
+ /* Enable L2 and L3 DOS */
+ netc_port_rmw(np, NETC_PCR, PCR_L2DOSE | PCR_L3DOSE,
+ PCR_L2DOSE | PCR_L3DOSE);
+}
+
+static void netc_port_default_config(struct netc_port *np)
+{
+ netc_port_fixed_config(np);
+
+ /* Default VLAN unaware */
+ netc_port_rmw(np, NETC_BPDVR, BPDVR_RXVAM, BPDVR_RXVAM);
+
+ if (dsa_port_is_cpu(np->dp))
+ /* For CPU port, source port pruning is disabled and
+ * hardware MAC learning is enabled by default.
+ */
+ netc_port_rmw(np, NETC_BPCR, BPCR_SRCPRND | BPCR_MLO,
+ BPCR_SRCPRND | FIELD_PREP(BPCR_MLO, MLO_HW));
+ else
+ netc_port_set_mlo(np, MLO_DISABLE);
+
+ netc_port_set_max_frame_size(np, NETC_MAX_FRAME_LEN);
+ netc_port_set_all_tc_msdu(np);
+ netc_mac_port_rmw(np, NETC_PM_CMD_CFG(0), PM_CMD_CFG_TX_EN,
+ PM_CMD_CFG_TX_EN);
+ netc_port_rmw(np, NETC_POR, PCR_TXDIS, 0);
+}
+
+static int netc_setup(struct dsa_switch *ds)
+{
+ struct netc_switch *priv = ds->priv;
+ struct dsa_port *dp;
+ int err;
+
+ err = netc_init_switch_id(priv);
+ if (err)
+ return err;
+
+ err = netc_init_all_ports(priv);
+ if (err)
+ return err;
+
+ err = netc_init_ntmp_user(priv);
+ if (err)
+ return err;
+
+ netc_switch_fixed_config(priv);
+
+ /* default setting for ports */
+ dsa_switch_for_each_available_port(dp, ds)
+ netc_port_default_config(priv->ports[dp->index]);
+
+ return 0;
+}
+
+static void netc_teardown(struct dsa_switch *ds)
+{
+ struct netc_switch *priv = ds->priv;
+
+ netc_free_ntmp_user(priv);
+}
+
+static struct device_node *netc_get_switch_ports(struct device_node *node)
+{
+ struct device_node *ports;
+
+ ports = of_get_child_by_name(node, "ports");
+ if (!ports)
+ ports = of_get_child_by_name(node, "ethernet-ports");
+
+ return ports;
+}
+
+static bool netc_port_is_emdio_consumer(struct device_node *node)
+{
+ struct device_node *mdio_node;
+
+ /* If the port node has phy-handle property and it does
+ * not contain a mdio child node, then the port is the
+ * EMDIO consumer.
+ */
+ mdio_node = of_get_child_by_name(node, "mdio");
+ if (!mdio_node)
+ return true;
+
+ of_node_put(mdio_node);
+
+ return false;
+}
+
+/* Currently, phylink_of_phy_connect() is called by dsa_user_create(),
+ * so if the switch uses the external MDIO controller (like the EMDIO
+ * function) to manage the external PHYs. The MDIO bus may not be
+ * created when phylink_of_phy_connect() is called, so it will return
+ * an error and cause the switch driver to fail to probe.
+ * This workaround can be removed when DSA phylink_of_phy_connect()
+ * calls are moved from probe() to ndo_open().
+ */
+static int netc_switch_check_emdio_is_ready(struct device *dev)
+{
+ struct device_node *ports, *phy_node;
+ struct phy_device *phydev;
+ int err = 0;
+
+ ports = netc_get_switch_ports(dev->of_node);
+ if (!ports)
+ return 0;
+
+ for_each_available_child_of_node_scoped(ports, child) {
+ /* If the node does not have phy-handle property, then
+ * the port does not connect to a PHY, so the port is
+ * not the EMDIO consumer.
+ */
+ phy_node = of_parse_phandle(child, "phy-handle", 0);
+ if (!phy_node)
+ continue;
+
+ if (!netc_port_is_emdio_consumer(child)) {
+ of_node_put(phy_node);
+ continue;
+ }
+
+ phydev = of_phy_find_device(phy_node);
+ of_node_put(phy_node);
+ if (!phydev) {
+ err = -EPROBE_DEFER;
+ goto out;
+ }
+
+ put_device(&phydev->mdio.dev);
+ }
+
+out:
+ of_node_put(ports);
+
+ return err;
+}
+
+static int netc_switch_pci_init(struct pci_dev *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct netc_switch_regs *regs;
+ struct netc_switch *priv;
+ int err;
+
+ pcie_flr(pdev);
+ err = pci_enable_device_mem(pdev);
+ if (err)
+ return dev_err_probe(dev, err, "Failed to enable device\n");
+
+ /* The command BD rings and NTMP tables need DMA. No need to check
+ * the return value, because it never returns fail when the mask is
+ * DMA_BIT_MASK(64), see dma-api-howto.rst.
+ */
+ dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
+ err = pci_request_mem_regions(pdev, KBUILD_MODNAME);
+ if (err) {
+ dev_err(dev, "Failed to request memory regions, err: %pe\n",
+ ERR_PTR(err));
+ goto disable_pci_device;
+ }
+
+ pci_set_master(pdev);
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ err = -ENOMEM;
+ goto release_mem_regions;
+ }
+
+ priv->pdev = pdev;
+ priv->dev = dev;
+
+ regs = &priv->regs;
+ regs->base = pci_ioremap_bar(pdev, NETC_REGS_BAR);
+ if (!regs->base) {
+ err = -ENXIO;
+ dev_err(dev, "pci_ioremap_bar() failed\n");
+ goto release_mem_regions;
+ }
+
+ regs->port = regs->base + NETC_REGS_PORT_BASE;
+ regs->global = regs->base + NETC_REGS_GLOBAL_BASE;
+ pci_set_drvdata(pdev, priv);
+
+ return 0;
+
+release_mem_regions:
+ pci_release_mem_regions(pdev);
+disable_pci_device:
+ pci_disable_device(pdev);
+
+ return err;
+}
+
+static void netc_switch_pci_destroy(struct pci_dev *pdev)
+{
+ struct netc_switch *priv = pci_get_drvdata(pdev);
+
+ iounmap(priv->regs.base);
+ pci_release_mem_regions(pdev);
+ pci_disable_device(pdev);
+}
+
+static void netc_switch_get_ip_revision(struct netc_switch *priv)
+{
+ struct netc_switch_regs *regs = &priv->regs;
+ u32 val = netc_glb_rd(regs, NETC_IPBRR0);
+
+ priv->revision = val & IPBRR0_IP_REV;
+}
+
+static const struct dsa_switch_ops netc_switch_ops = {
+ .get_tag_protocol = netc_get_tag_protocol,
+ .setup = netc_setup,
+ .teardown = netc_teardown,
+};
+
+static int netc_switch_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct device_node *node = dev_of_node(&pdev->dev);
+ struct device *dev = &pdev->dev;
+ struct netc_switch *priv;
+ struct dsa_switch *ds;
+ int err;
+
+ if (!node)
+ return dev_err_probe(dev, -ENODEV,
+ "No DT bindings, skipping\n");
+
+ err = netc_switch_check_emdio_is_ready(dev);
+ if (err)
+ return err;
+
+ err = netc_switch_pci_init(pdev);
+ if (err)
+ return err;
+
+ priv = pci_get_drvdata(pdev);
+ netc_switch_get_ip_revision(priv);
+
+ err = netc_switch_platform_probe(priv);
+ if (err)
+ goto destroy_netc_switch;
+
+ ds = devm_kzalloc(dev, sizeof(*ds), GFP_KERNEL);
+ if (!ds) {
+ err = -ENOMEM;
+ goto destroy_netc_switch;
+ }
+
+ ds->dev = dev;
+ ds->num_ports = priv->info->num_ports;
+ ds->num_tx_queues = NETC_TC_NUM;
+ ds->ops = &netc_switch_ops;
+ ds->priv = priv;
+
+ priv->ds = ds;
+
+ err = dsa_register_switch(ds);
+ if (err) {
+ dev_err_probe(dev, err, "Failed to register DSA switch\n");
+ goto destroy_netc_switch;
+ }
+
+ return 0;
+
+destroy_netc_switch:
+ netc_switch_pci_destroy(pdev);
+
+ return err;
+}
+
+static void netc_switch_remove(struct pci_dev *pdev)
+{
+ struct netc_switch *priv = pci_get_drvdata(pdev);
+
+ if (!priv)
+ return;
+
+ dsa_unregister_switch(priv->ds);
+ netc_switch_pci_destroy(pdev);
+}
+
+static void netc_switch_shutdown(struct pci_dev *pdev)
+{
+ struct netc_switch *priv = pci_get_drvdata(pdev);
+
+ if (!priv)
+ return;
+
+ dsa_switch_shutdown(priv->ds);
+ pci_set_drvdata(pdev, NULL);
+}
+
+static const struct pci_device_id netc_switch_ids[] = {
+ { PCI_DEVICE(NETC_SWITCH_VENDOR_ID, NETC_SWITCH_DEVICE_ID) },
+ { }
+};
+MODULE_DEVICE_TABLE(pci, netc_switch_ids);
+
+static struct pci_driver netc_switch_driver = {
+ .name = KBUILD_MODNAME,
+ .id_table = netc_switch_ids,
+ .probe = netc_switch_probe,
+ .remove = netc_switch_remove,
+ .shutdown = netc_switch_shutdown,
+};
+module_pci_driver(netc_switch_driver);
+
+MODULE_DESCRIPTION("NXP NETC Switch driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/dsa/netc/netc_platform.c b/drivers/net/dsa/netc/netc_platform.c
new file mode 100644
index 000000000000..abd599ea9c8d
--- /dev/null
+++ b/drivers/net/dsa/netc/netc_platform.c
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * NXP NETC switch driver
+ * Copyright 2025-2026 NXP
+ */
+
+#include "netc_switch.h"
+
+struct netc_switch_platform {
+ u16 revision;
+ const struct netc_switch_info *info;
+};
+
+static const struct netc_switch_info imx94_info = {
+ .num_ports = 4,
+};
+
+static const struct netc_switch_platform netc_platforms[] = {
+ { .revision = NETC_SWITCH_REV_4_3, .info = &imx94_info, },
+ { }
+};
+
+static const struct netc_switch_info *
+netc_switch_get_info(struct netc_switch *priv)
+{
+ int i;
+
+ /* Matching based on IP revision */
+ for (i = 0; i < ARRAY_SIZE(netc_platforms); i++) {
+ if (priv->revision == netc_platforms[i].revision)
+ return netc_platforms[i].info;
+ }
+
+ return NULL;
+}
+
+int netc_switch_platform_probe(struct netc_switch *priv)
+{
+ const struct netc_switch_info *info = netc_switch_get_info(priv);
+
+ if (!info) {
+ dev_err(priv->dev, "Cannot find switch platform info\n");
+ return -EINVAL;
+ }
+
+ priv->info = info;
+
+ return 0;
+}
diff --git a/drivers/net/dsa/netc/netc_switch.h b/drivers/net/dsa/netc/netc_switch.h
new file mode 100644
index 000000000000..dac19bfba02b
--- /dev/null
+++ b/drivers/net/dsa/netc/netc_switch.h
@@ -0,0 +1,92 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright 2025-2026 NXP
+ */
+
+#ifndef _NETC_SWITCH_H
+#define _NETC_SWITCH_H
+
+#include <linux/dsa/tag_netc.h>
+#include <linux/fsl/netc_global.h>
+#include <linux/fsl/ntmp.h>
+#include <linux/of_device.h>
+#include <linux/of_net.h>
+#include <linux/pci.h>
+
+#include "netc_switch_hw.h"
+
+#define NETC_REGS_BAR 0
+#define NETC_MSIX_TBL_BAR 2
+#define NETC_REGS_PORT_BASE 0x4000
+/* register block size per port */
+#define NETC_REGS_PORT_SIZE 0x4000
+#define PORT_IOBASE(p) (NETC_REGS_PORT_SIZE * (p))
+#define NETC_REGS_GLOBAL_BASE 0x70000
+
+#define NETC_SWITCH_REV_4_3 0x0403
+
+#define NETC_TC_NUM 8
+#define NETC_CBDR_NUM 2
+
+#define NETC_MAX_FRAME_LEN 9600
+
+struct netc_switch;
+
+struct netc_switch_info {
+ u32 num_ports;
+};
+
+struct netc_port_caps {
+ u32 half_duplex:1; /* indicates whether the port support half-duplex */
+ u32 pmac:1; /* indicates whether the port has preemption MAC */
+ u32 pseudo_link:1;
+};
+
+struct netc_port {
+ void __iomem *iobase;
+ struct netc_switch *switch_priv;
+ struct netc_port_caps caps;
+ struct dsa_port *dp;
+ struct clk *ref_clk; /* RGMII/RMII reference clock */
+ struct mii_bus *emdio;
+};
+
+struct netc_switch_regs {
+ void __iomem *base;
+ void __iomem *port;
+ void __iomem *global;
+};
+
+struct netc_switch {
+ struct pci_dev *pdev;
+ struct device *dev;
+ struct dsa_switch *ds;
+ u16 revision;
+
+ const struct netc_switch_info *info;
+ struct netc_switch_regs regs;
+ struct netc_port **ports;
+
+ struct ntmp_user ntmp;
+};
+
+/* Write/Read Switch base registers */
+#define netc_base_rd(r, o) netc_read((r)->base + (o))
+#define netc_base_wr(r, o, v) netc_write((r)->base + (o), v)
+
+/* Write/Read registers of Switch Port (including pseudo MAC port) */
+#define netc_port_rd(p, o) netc_read((p)->iobase + (o))
+#define netc_port_wr(p, o, v) netc_write((p)->iobase + (o), v)
+
+/* Write/Read Switch global registers */
+#define netc_glb_rd(r, o) netc_read((r)->global + (o))
+#define netc_glb_wr(r, o, v) netc_write((r)->global + (o), v)
+
+static inline bool is_netc_pseudo_port(struct netc_port *np)
+{
+ return np->caps.pseudo_link;
+}
+
+int netc_switch_platform_probe(struct netc_switch *priv);
+
+#endif
diff --git a/drivers/net/dsa/netc/netc_switch_hw.h b/drivers/net/dsa/netc/netc_switch_hw.h
new file mode 100644
index 000000000000..11cb124ce4bf
--- /dev/null
+++ b/drivers/net/dsa/netc/netc_switch_hw.h
@@ -0,0 +1,137 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright 2025-2026 NXP
+ */
+
+#ifndef _NETC_SWITCH_HW_H
+#define _NETC_SWITCH_HW_H
+
+#include <linux/bitops.h>
+
+#define NETC_SWITCH_VENDOR_ID 0x1131
+#define NETC_SWITCH_DEVICE_ID 0xeef2
+
+/* Definition of Switch base registers */
+#define NETC_CBDRMR(a) (0x0800 + (a) * 0x30)
+#define NETC_CBDRBAR0(a) (0x0810 + (a) * 0x30)
+#define NETC_CBDRBAR1(a) (0x0814 + (a) * 0x30)
+#define NETC_CBDRPIR(a) (0x0818 + (a) * 0x30)
+#define NETC_CBDRCIR(a) (0x081c + (a) * 0x30)
+#define NETC_CBDRLENR(a) (0x0820 + (a) * 0x30)
+
+#define NETC_SWCR 0x1018
+#define SWCR_SWID GENMASK(2, 0)
+
+#define NETC_DOSL2CR 0x1220
+#define DOSL2CR_SAMEADDR BIT(0)
+#define DOSL2CR_MSAMCC BIT(1)
+
+#define NETC_DOSL3CR 0x1224
+#define DOSL3CR_SAMEADDR BIT(0)
+#define DOSL3CR_IPSAMCC BIT(1)
+
+#define NETC_VFHTDECR1 0x2014
+#define NETC_VFHTDECR2 0x2018
+#define VFHTDECR2_ET_PORT(a) BIT((a))
+#define VFHTDECR2_MLO GENMASK(26, 24)
+#define VFHTDECR2_MFO GENMASK(28, 27)
+
+/* Definition of Switch port registers */
+#define NETC_PCAPR 0x0000
+#define PCAPR_LINK_TYPE BIT(4)
+#define PCAPR_NUM_TC GENMASK(15, 12)
+#define PCAPR_NUM_Q GENMASK(19, 16)
+#define PCAPR_NUM_CG GENMASK(27, 24)
+#define PCAPR_TGS BIT(28)
+#define PCAPR_CBS BIT(29)
+
+#define NETC_PMCAPR 0x0004
+#define PMCAPR_HD BIT(8)
+#define PMCAPR_FP GENMASK(10, 9)
+#define FP_SUPPORT 2
+
+#define NETC_PCR 0x0010
+#define PCR_HDR_FMT BIT(0)
+#define PCR_NS_TAG_PORT BIT(3)
+#define PCR_L2DOSE BIT(4)
+#define PCR_L3DOSE BIT(5)
+#define PCR_TIMER_CS BIT(8)
+#define PCR_PSPEED GENMASK(29, 16)
+#define PSPEED_SET_VAL(s) FIELD_PREP(PCR_PSPEED, ((s) / 10 - 1))
+
+#define NETC_PQOSMR 0x0054
+#define PQOSMR_VS BIT(0)
+#define PQOSMR_VE BIT(1)
+#define PQOSMR_DDR GENMASK(3, 2)
+#define PQOSMR_DIPV GENMASK(6, 4)
+#define PQOSMR_VQMP GENMASK(19, 16)
+#define PQOSMR_QVMP GENMASK(23, 20)
+
+#define NETC_POR 0x100
+#define PCR_TXDIS BIT(0)
+#define PCR_RXDIS BIT(1)
+
+#define NETC_PTCTMSDUR(a) (0x208 + (a) * 0x20)
+#define PTCTMSDUR_MAXSDU GENMASK(15, 0)
+#define PTCTMSDUR_SDU_TYPE GENMASK(17, 16)
+#define SDU_TYPE_PPDU 0
+#define SDU_TYPE_MPDU 1
+#define SDU_TYPE_MSDU 2
+
+#define NETC_BPCR 0x500
+#define BPCR_DYN_LIMIT GENMASK(15, 0)
+#define BPCR_MLO GENMASK(22, 20)
+#define BPCR_UUCASTE BIT(24)
+#define BPCR_UMCASTE BIT(25)
+#define BPCR_MCASTE BIT(26)
+#define BPCR_BCASTE BIT(27)
+#define BPCR_STAMVD BIT(28)
+#define BPCR_SRCPRND BIT(29)
+
+/* MAC learning options, see BPCR[MLO], VFHTDECR2[MLO] and
+ * VLAN Filter Table CFGE_DATA[MLO]
+ */
+enum netc_mlo {
+ MLO_NOT_OVERRIDE = 0,
+ MLO_DISABLE,
+ MLO_HW,
+ MLO_SW_SEC,
+ MLO_SW_UNSEC,
+ MLO_DISABLE_SMAC,
+};
+
+/* MAC forwarding options, see VFHTDECR2[MFO] and VLAN
+ * Filter Table CFGE_DATA[MFO]
+ */
+enum netc_mfo {
+ MFO_NO_FDB_LOOKUP = 1,
+ MFO_NO_MATCH_FLOOD,
+ MFO_NO_MATCH_DISCARD,
+};
+
+#define NETC_BPDVR 0x510
+#define BPDVR_VID GENMASK(11, 0)
+#define BPDVR_DEI BIT(12)
+#define BPDVR_PCP GENMASK(15, 13)
+#define BPDVR_TPID BIT(16)
+#define BPDVR_RXTAGA GENMASK(23, 20)
+#define BPDVR_RXVAM BIT(24)
+#define BPDVR_TXTAGA GENMASK(26, 25)
+
+/* Definition of Switch ethernet MAC port registers */
+#define NETC_PMAC_OFFSET 0x400
+#define NETC_PM_CMD_CFG(a) (0x1008 + (a) * 0x400)
+#define PM_CMD_CFG_TX_EN BIT(0)
+#define PM_CMD_CFG_RX_EN BIT(1)
+
+#define NETC_PM_MAXFRM(a) (0x1014 + (a) * 0x400)
+#define PM_MAXFRAM GENMASK(15, 0)
+
+#define NETC_PEMDIOCR 0x1c00
+#define NETC_EMDIO_BASE NETC_PEMDIOCR
+
+/* Definition of global registers (read only) */
+#define NETC_IPBRR0 0x0bf8
+#define IPBRR0_IP_REV GENMASK(15, 0)
+
+#endif
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v3 net-next 11/14] net: dsa: netc: add phylink MAC operations
2026-03-26 6:29 [PATCH v3 net-next 00/14] Add preliminary NETC switch support for i.MX94 Wei Fang
` (9 preceding siblings ...)
2026-03-26 6:29 ` [PATCH v3 net-next 10/14] net: dsa: netc: introduce NXP NETC switch driver for i.MX94 Wei Fang
@ 2026-03-26 6:29 ` Wei Fang
2026-03-26 6:29 ` [PATCH v3 net-next 12/14] net: dsa: netc: add more basic functions support Wei Fang
` (2 subsequent siblings)
13 siblings, 0 replies; 16+ messages in thread
From: Wei Fang @ 2026-03-26 6:29 UTC (permalink / raw)
To: claudiu.manoil, vladimir.oltean, xiaoning.wang, andrew+netdev,
davem, edumazet, kuba, pabeni, robh, krzk+dt, conor+dt,
f.fainelli, frank.li, chleroy, horms, linux, andrew
Cc: netdev, linux-kernel, devicetree, linuxppc-dev, linux-arm-kernel,
imx
Different versions of NETC switches have different numbers of ports and
MAC capabilities, so add .phylink_get_caps() to struct netc_switch_info,
so that each version of the NETC switch can implement its own callback
to obtain MAC capabilities. In addition, related interfaces of struct
phylink_mac_ops are added, such as .mac_config(), .mac_link_up(), and
.mac_link_down().
Signed-off-by: Wei Fang <wei.fang@nxp.com>
---
drivers/net/dsa/netc/netc_main.c | 179 ++++++++++++++++++++++++++
drivers/net/dsa/netc/netc_platform.c | 40 ++++++
drivers/net/dsa/netc/netc_switch.h | 4 +
drivers/net/dsa/netc/netc_switch_hw.h | 21 +++
4 files changed, 244 insertions(+)
diff --git a/drivers/net/dsa/netc/netc_main.c b/drivers/net/dsa/netc/netc_main.c
index 5828fd3e342e..f11f5d0f6a6d 100644
--- a/drivers/net/dsa/netc/netc_main.c
+++ b/drivers/net/dsa/netc/netc_main.c
@@ -569,10 +569,188 @@ static void netc_switch_get_ip_revision(struct netc_switch *priv)
priv->revision = val & IPBRR0_IP_REV;
}
+static void netc_phylink_get_caps(struct dsa_switch *ds, int port,
+ struct phylink_config *config)
+{
+ struct netc_switch *priv = ds->priv;
+
+ priv->info->phylink_get_caps(port, config);
+}
+
+static void netc_port_set_mac_mode(struct netc_port *np,
+ unsigned int mode,
+ phy_interface_t phy_mode)
+{
+ u32 mask = PM_IF_MODE_IFMODE | PM_IF_MODE_REVMII;
+ u32 val = 0;
+
+ switch (phy_mode) {
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ val |= IFMODE_RGMII;
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ val |= IFMODE_RMII;
+ break;
+ case PHY_INTERFACE_MODE_REVMII:
+ val |= PM_IF_MODE_REVMII;
+ fallthrough;
+ case PHY_INTERFACE_MODE_MII:
+ val |= IFMODE_MII;
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
+ case PHY_INTERFACE_MODE_2500BASEX:
+ val |= IFMODE_SGMII;
+ break;
+ default:
+ break;
+ }
+
+ netc_mac_port_rmw(np, NETC_PM_IF_MODE(0), mask, val);
+}
+
+static void netc_mac_config(struct phylink_config *config, unsigned int mode,
+ const struct phylink_link_state *state)
+{
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+
+ netc_port_set_mac_mode(NETC_PORT(dp->ds, dp->index), mode,
+ state->interface);
+}
+
+static void netc_port_set_speed(struct netc_port *np, int speed)
+{
+ netc_port_rmw(np, NETC_PCR, PCR_PSPEED, PSPEED_SET_VAL(speed));
+}
+
+static void netc_port_set_rgmii_mac(struct netc_port *np,
+ int speed, int duplex)
+{
+ u32 mask, val;
+
+ mask = PM_IF_MODE_SSP | PM_IF_MODE_HD | PM_IF_MODE_M10;
+
+ switch (speed) {
+ default:
+ case SPEED_1000:
+ val = FIELD_PREP(PM_IF_MODE_SSP, SSP_1G);
+ break;
+ case SPEED_100:
+ val = FIELD_PREP(PM_IF_MODE_SSP, SSP_100M);
+ break;
+ case SPEED_10:
+ val = FIELD_PREP(PM_IF_MODE_SSP, SSP_10M);
+ break;
+ }
+
+ if (duplex != DUPLEX_FULL)
+ val |= PM_IF_MODE_HD;
+
+ netc_mac_port_rmw(np, NETC_PM_IF_MODE(0), mask, val);
+}
+
+static void netc_port_set_rmii_mii_mac(struct netc_port *np,
+ int speed, int duplex)
+{
+ u32 mask, val = 0;
+
+ mask = PM_IF_MODE_SSP | PM_IF_MODE_HD | PM_IF_MODE_M10;
+
+ if (speed == SPEED_10)
+ val |= PM_IF_MODE_M10;
+
+ if (duplex != DUPLEX_FULL)
+ val |= PM_IF_MODE_HD;
+
+ netc_mac_port_rmw(np, NETC_PM_IF_MODE(0), mask, val);
+}
+
+static void netc_port_mac_rx_enable(struct netc_port *np)
+{
+ netc_port_rmw(np, NETC_POR, PCR_RXDIS, 0);
+ netc_mac_port_rmw(np, NETC_PM_CMD_CFG(0), PM_CMD_CFG_RX_EN,
+ PM_CMD_CFG_RX_EN);
+}
+
+static void netc_port_wait_rx_empty(struct netc_port *np, int mac)
+{
+ u32 val;
+
+ if (read_poll_timeout(netc_port_rd, val, val & PM_IEVENT_RX_EMPTY,
+ 100, 10000, false, np, NETC_PM_IEVENT(mac)))
+ dev_warn(np->switch_priv->dev,
+ "MAC %d of swp%d RX is not empty\n", mac,
+ np->dp->index);
+}
+
+static void netc_port_mac_rx_graceful_stop(struct netc_port *np)
+{
+ u32 val;
+
+ if (is_netc_pseudo_port(np))
+ goto check_rx_busy;
+
+ if (np->caps.pmac) {
+ netc_port_rmw(np, NETC_PM_CMD_CFG(1), PM_CMD_CFG_RX_EN, 0);
+ netc_port_wait_rx_empty(np, 1);
+ }
+
+ netc_port_rmw(np, NETC_PM_CMD_CFG(0), PM_CMD_CFG_RX_EN, 0);
+ netc_port_wait_rx_empty(np, 0);
+
+check_rx_busy:
+ if (read_poll_timeout(netc_port_rd, val, !(val & PSR_RX_BUSY),
+ 100, 10000, false, np, NETC_PSR))
+ dev_warn(np->switch_priv->dev, "swp%d RX is busy\n",
+ np->dp->index);
+
+ netc_port_rmw(np, NETC_POR, PCR_RXDIS, PCR_RXDIS);
+}
+
+static void netc_mac_link_up(struct phylink_config *config,
+ struct phy_device *phy, unsigned int mode,
+ phy_interface_t interface, int speed,
+ int duplex, bool tx_pause, bool rx_pause)
+{
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct netc_port *np;
+
+ np = NETC_PORT(dp->ds, dp->index);
+ netc_port_set_speed(np, speed);
+
+ if (phy_interface_mode_is_rgmii(interface))
+ netc_port_set_rgmii_mac(np, speed, duplex);
+
+ if (interface == PHY_INTERFACE_MODE_RMII ||
+ interface == PHY_INTERFACE_MODE_REVMII ||
+ interface == PHY_INTERFACE_MODE_MII)
+ netc_port_set_rmii_mii_mac(np, speed, duplex);
+
+ netc_port_mac_rx_enable(np);
+}
+
+static void netc_mac_link_down(struct phylink_config *config,
+ unsigned int mode,
+ phy_interface_t interface)
+{
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+
+ netc_port_mac_rx_graceful_stop(NETC_PORT(dp->ds, dp->index));
+}
+
+static const struct phylink_mac_ops netc_phylink_mac_ops = {
+ .mac_config = netc_mac_config,
+ .mac_link_up = netc_mac_link_up,
+ .mac_link_down = netc_mac_link_down,
+};
+
static const struct dsa_switch_ops netc_switch_ops = {
.get_tag_protocol = netc_get_tag_protocol,
.setup = netc_setup,
.teardown = netc_teardown,
+ .phylink_get_caps = netc_phylink_get_caps,
};
static int netc_switch_probe(struct pci_dev *pdev,
@@ -613,6 +791,7 @@ static int netc_switch_probe(struct pci_dev *pdev,
ds->num_ports = priv->info->num_ports;
ds->num_tx_queues = NETC_TC_NUM;
ds->ops = &netc_switch_ops;
+ ds->phylink_mac_ops = &netc_phylink_mac_ops;
ds->priv = priv;
priv->ds = ds;
diff --git a/drivers/net/dsa/netc/netc_platform.c b/drivers/net/dsa/netc/netc_platform.c
index abd599ea9c8d..8d3fb5151902 100644
--- a/drivers/net/dsa/netc/netc_platform.c
+++ b/drivers/net/dsa/netc/netc_platform.c
@@ -11,8 +11,48 @@ struct netc_switch_platform {
const struct netc_switch_info *info;
};
+static void imx94_switch_phylink_get_caps(int port,
+ struct phylink_config *config)
+{
+ config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+ MAC_1000FD;
+
+ switch (port) {
+ case 0 ... 1:
+ __set_bit(PHY_INTERFACE_MODE_SGMII,
+ config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_1000BASEX,
+ config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_2500BASEX,
+ config->supported_interfaces);
+ config->mac_capabilities |= MAC_2500FD;
+ fallthrough;
+ case 2:
+ config->mac_capabilities |= MAC_10 | MAC_100;
+ __set_bit(PHY_INTERFACE_MODE_MII,
+ config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_RMII,
+ config->supported_interfaces);
+ if (port == 2)
+ __set_bit(PHY_INTERFACE_MODE_REVMII,
+ config->supported_interfaces);
+
+ phy_interface_set_rgmii(config->supported_interfaces);
+ break;
+ case 3: /* CPU port */
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
+ config->mac_capabilities |= MAC_10FD | MAC_100FD |
+ MAC_2500FD;
+ break;
+ default:
+ break;
+ }
+}
+
static const struct netc_switch_info imx94_info = {
.num_ports = 4,
+ .phylink_get_caps = imx94_switch_phylink_get_caps,
};
static const struct netc_switch_platform netc_platforms[] = {
diff --git a/drivers/net/dsa/netc/netc_switch.h b/drivers/net/dsa/netc/netc_switch.h
index dac19bfba02b..eb65c36ecead 100644
--- a/drivers/net/dsa/netc/netc_switch.h
+++ b/drivers/net/dsa/netc/netc_switch.h
@@ -34,6 +34,7 @@ struct netc_switch;
struct netc_switch_info {
u32 num_ports;
+ void (*phylink_get_caps)(int port, struct phylink_config *config);
};
struct netc_port_caps {
@@ -70,6 +71,9 @@ struct netc_switch {
struct ntmp_user ntmp;
};
+#define NETC_PRIV(ds) ((struct netc_switch *)((ds)->priv))
+#define NETC_PORT(ds, port_id) (NETC_PRIV(ds)->ports[(port_id)])
+
/* Write/Read Switch base registers */
#define netc_base_rd(r, o) netc_read((r)->base + (o))
#define netc_base_wr(r, o, v) netc_write((r)->base + (o), v)
diff --git a/drivers/net/dsa/netc/netc_switch_hw.h b/drivers/net/dsa/netc/netc_switch_hw.h
index 11cb124ce4bf..881122004644 100644
--- a/drivers/net/dsa/netc/netc_switch_hw.h
+++ b/drivers/net/dsa/netc/netc_switch_hw.h
@@ -71,6 +71,10 @@
#define PCR_TXDIS BIT(0)
#define PCR_RXDIS BIT(1)
+#define NETC_PSR 0x104
+#define PSR_TX_BUSY BIT(0)
+#define PSR_RX_BUSY BIT(1)
+
#define NETC_PTCTMSDUR(a) (0x208 + (a) * 0x20)
#define PTCTMSDUR_MAXSDU GENMASK(15, 0)
#define PTCTMSDUR_SDU_TYPE GENMASK(17, 16)
@@ -127,6 +131,23 @@ enum netc_mfo {
#define NETC_PM_MAXFRM(a) (0x1014 + (a) * 0x400)
#define PM_MAXFRAM GENMASK(15, 0)
+#define NETC_PM_IEVENT(a) (0x1040 + (a) * 0x400)
+#define PM_IEVENT_RX_EMPTY BIT(6)
+
+#define NETC_PM_IF_MODE(a) (0x1300 + (a) * 0x400)
+#define PM_IF_MODE_IFMODE GENMASK(2, 0)
+#define IFMODE_MII 1
+#define IFMODE_RMII 3
+#define IFMODE_RGMII 4
+#define IFMODE_SGMII 5
+#define PM_IF_MODE_REVMII BIT(3)
+#define PM_IF_MODE_M10 BIT(4)
+#define PM_IF_MODE_HD BIT(6)
+#define PM_IF_MODE_SSP GENMASK(14, 13)
+#define SSP_100M 0
+#define SSP_10M 1
+#define SSP_1G 2
+
#define NETC_PEMDIOCR 0x1c00
#define NETC_EMDIO_BASE NETC_PEMDIOCR
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v3 net-next 12/14] net: dsa: netc: add more basic functions support
2026-03-26 6:29 [PATCH v3 net-next 00/14] Add preliminary NETC switch support for i.MX94 Wei Fang
` (10 preceding siblings ...)
2026-03-26 6:29 ` [PATCH v3 net-next 11/14] net: dsa: netc: add phylink MAC operations Wei Fang
@ 2026-03-26 6:29 ` Wei Fang
2026-03-26 6:29 ` [PATCH v3 net-next 13/14] net: dsa: netc: initialize buffer bool table and implement flow-control Wei Fang
2026-03-26 6:29 ` [PATCH v3 net-next 14/14] net: dsa: netc: add support for the standardized counters Wei Fang
13 siblings, 0 replies; 16+ messages in thread
From: Wei Fang @ 2026-03-26 6:29 UTC (permalink / raw)
To: claudiu.manoil, vladimir.oltean, xiaoning.wang, andrew+netdev,
davem, edumazet, kuba, pabeni, robh, krzk+dt, conor+dt,
f.fainelli, frank.li, chleroy, horms, linux, andrew
Cc: netdev, linux-kernel, devicetree, linuxppc-dev, linux-arm-kernel,
imx
This patch expands the NETC switch driver with several foundational
features, including FDB and MDB management, STP state handling, MTU
configuration, port setup/teardown, and host flooding support.
At this stage, the driver operates only in standalone port mode. Each
port uses VLAN 0 as its PVID, meaning ingress frames are internally
assigned VID 0 regardless of whether they arrive tagged or untagged.
Note that this does not inject a VLAN 0 header into the frame, the VID
is used purely for subsequent VLAN processing within the switch.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
---
drivers/net/dsa/netc/netc_main.c | 540 ++++++++++++++++++++++++++
drivers/net/dsa/netc/netc_switch.h | 33 ++
drivers/net/dsa/netc/netc_switch_hw.h | 11 +
3 files changed, 584 insertions(+)
diff --git a/drivers/net/dsa/netc/netc_main.c b/drivers/net/dsa/netc/netc_main.c
index f11f5d0f6a6d..3609d83ac363 100644
--- a/drivers/net/dsa/netc/netc_main.c
+++ b/drivers/net/dsa/netc/netc_main.c
@@ -7,11 +7,36 @@
#include <linux/clk.h>
#include <linux/etherdevice.h>
#include <linux/fsl/enetc_mdio.h>
+#include <linux/if_bridge.h>
#include <linux/if_vlan.h>
#include <linux/of_mdio.h>
#include "netc_switch.h"
+static struct netc_fdb_entry *
+netc_lookup_fdb_entry(struct netc_switch *priv,
+ const unsigned char *addr,
+ u16 vid)
+{
+ struct netc_fdb_entry *entry;
+
+ hlist_for_each_entry(entry, &priv->fdb_list, node)
+ if (ether_addr_equal(entry->keye.mac_addr, addr) &&
+ le16_to_cpu(entry->keye.fid) == vid)
+ return entry;
+
+ return NULL;
+}
+
+static void netc_destroy_fdb_list(struct netc_switch *priv)
+{
+ struct netc_fdb_entry *entry;
+ struct hlist_node *tmp;
+
+ hlist_for_each_entry_safe(entry, tmp, &priv->fdb_list, node)
+ netc_del_fdb_entry(entry);
+}
+
static enum dsa_tag_protocol
netc_get_tag_protocol(struct dsa_switch *ds, int port,
enum dsa_tag_protocol mprot)
@@ -386,6 +411,212 @@ static void netc_port_default_config(struct netc_port *np)
netc_port_rmw(np, NETC_POR, PCR_TXDIS, 0);
}
+static u32 netc_available_port_bitmap(struct netc_switch *priv)
+{
+ struct dsa_port *dp;
+ u32 bitmap = 0;
+
+ dsa_switch_for_each_available_port(dp, priv->ds)
+ bitmap |= BIT(dp->index);
+
+ return bitmap;
+}
+
+static int netc_add_standalone_vlan_entry(struct netc_switch *priv)
+{
+ u32 bitmap_stg = VFT_STG_ID(0) | netc_available_port_bitmap(priv);
+ struct vft_cfge_data *cfge;
+ u16 cfg;
+ int err;
+
+ cfge = kzalloc_obj(*cfge);
+ if (!cfge)
+ return -ENOMEM;
+
+ cfge->bitmap_stg = cpu_to_le32(bitmap_stg);
+ cfge->et_eid = cpu_to_le32(NTMP_NULL_ENTRY_ID);
+ cfge->fid = cpu_to_le16(NETC_STANDALONE_PVID);
+
+ /* For standalone ports, MAC learning needs to be disabled, so frames
+ * from other user ports will not be forwarded to the standalone ports,
+ * because there are no FDB entries on the standalone ports. Also, the
+ * frames received by the standalone ports cannot be flooded to other
+ * ports, so MAC forwarding option needs to be set to
+ * MFO_NO_MATCH_DISCARD, so the frames will discarded rather than
+ * flooding to other ports.
+ */
+ cfg = FIELD_PREP(VFT_MLO, MLO_DISABLE) |
+ FIELD_PREP(VFT_MFO, MFO_NO_MATCH_DISCARD);
+ cfge->cfg = cpu_to_le16(cfg);
+
+ err = ntmp_vft_add_entry(&priv->ntmp, NETC_STANDALONE_PVID, cfge);
+ if (err)
+ dev_err(priv->dev,
+ "Failed to add standalone VLAN entry\n");
+
+ kfree(cfge);
+
+ return err;
+}
+
+static int netc_port_add_fdb_entry(struct netc_port *np,
+ const unsigned char *addr, u16 vid)
+{
+ struct netc_switch *priv = np->switch_priv;
+ struct netc_fdb_entry *entry;
+ struct fdbt_keye_data *keye;
+ struct fdbt_cfge_data *cfge;
+ int port = np->dp->index;
+ u32 cfg = 0;
+ int err;
+
+ entry = kzalloc_obj(*entry);
+ if (!entry)
+ return -ENOMEM;
+
+ keye = &entry->keye;
+ cfge = &entry->cfge;
+ ether_addr_copy(keye->mac_addr, addr);
+ keye->fid = cpu_to_le16(vid);
+
+ cfge->port_bitmap = cpu_to_le32(BIT(port));
+ cfge->cfg = cpu_to_le32(cfg);
+ cfge->et_eid = cpu_to_le32(NTMP_NULL_ENTRY_ID);
+
+ err = ntmp_fdbt_add_entry(&priv->ntmp, &entry->entry_id, keye, cfge);
+ if (err) {
+ kfree(entry);
+
+ return err;
+ }
+
+ netc_add_fdb_entry(priv, entry);
+
+ return 0;
+}
+
+static int netc_port_set_fdb_entry(struct netc_port *np,
+ const unsigned char *addr, u16 vid)
+{
+ struct netc_switch *priv = np->switch_priv;
+ struct netc_fdb_entry *entry;
+ int port = np->dp->index;
+ u32 port_bitmap;
+ int err = 0;
+
+ mutex_lock(&priv->fdbt_lock);
+
+ entry = netc_lookup_fdb_entry(priv, addr, vid);
+ if (!entry) {
+ err = netc_port_add_fdb_entry(np, addr, vid);
+ if (err)
+ dev_err(priv->dev,
+ "Failed to add FDB entry on port %d\n",
+ port);
+
+ goto unlock_fdbt;
+ }
+
+ port_bitmap = le32_to_cpu(entry->cfge.port_bitmap);
+ /* If the entry already exists on the port, return 0 directly */
+ if (unlikely(port_bitmap & BIT(port)))
+ goto unlock_fdbt;
+
+ /* If the entry already exists, but not on this port, we need to
+ * update the port bitmap. In general, it should only be valid
+ * for multicast or broadcast address.
+ */
+ port_bitmap ^= BIT(port);
+ entry->cfge.port_bitmap = cpu_to_le32(port_bitmap);
+ err = ntmp_fdbt_update_entry(&priv->ntmp, entry->entry_id,
+ &entry->cfge);
+ if (err) {
+ port_bitmap ^= BIT(port);
+ entry->cfge.port_bitmap = cpu_to_le32(port_bitmap);
+ dev_err(priv->dev, "Failed to set FDB entry on port %d\n",
+ port);
+ }
+
+unlock_fdbt:
+ mutex_unlock(&priv->fdbt_lock);
+
+ return err;
+}
+
+static int netc_port_del_fdb_entry(struct netc_port *np,
+ const unsigned char *addr, u16 vid)
+{
+ struct netc_switch *priv = np->switch_priv;
+ struct ntmp_user *ntmp = &priv->ntmp;
+ struct netc_fdb_entry *entry;
+ int port = np->dp->index;
+ u32 port_bitmap;
+ int err = 0;
+
+ mutex_lock(&priv->fdbt_lock);
+
+ entry = netc_lookup_fdb_entry(priv, addr, vid);
+ if (unlikely(!entry))
+ goto unlock_fdbt;
+
+ port_bitmap = le32_to_cpu(entry->cfge.port_bitmap);
+ if (unlikely(!(port_bitmap & BIT(port))))
+ goto unlock_fdbt;
+
+ if (port_bitmap != BIT(port)) {
+ /* If the entry also exists on other ports, we need to
+ * update the entry in the FDB table.
+ */
+ port_bitmap ^= BIT(port);
+ entry->cfge.port_bitmap = cpu_to_le32(port_bitmap);
+ err = ntmp_fdbt_update_entry(ntmp, entry->entry_id,
+ &entry->cfge);
+ if (err) {
+ port_bitmap ^= BIT(port);
+ entry->cfge.port_bitmap = cpu_to_le32(port_bitmap);
+ goto unlock_fdbt;
+ }
+ } else {
+ /* If the entry only exists on this port, just delete
+ * it from the FDB table.
+ */
+ err = ntmp_fdbt_delete_entry(ntmp, entry->entry_id);
+ if (err)
+ goto unlock_fdbt;
+
+ netc_del_fdb_entry(entry);
+ }
+
+unlock_fdbt:
+ mutex_unlock(&priv->fdbt_lock);
+
+ return err;
+}
+
+static int netc_add_standalone_fdb_bcast_entry(struct netc_switch *priv)
+{
+ const u8 bcast[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+ struct dsa_port *dp, *cpu_dp = NULL;
+
+ dsa_switch_for_each_cpu_port(dp, priv->ds) {
+ cpu_dp = dp;
+ break;
+ }
+
+ if (!cpu_dp)
+ return -ENODEV;
+
+ /* If the user port acts as a standalone port, then its PVID is 0,
+ * MLO is set to "disable MAC learning" and MFO is set to "discard
+ * frames if no matching entry found in FDB table". Therefore, we
+ * need to add a broadcast FDB entry on the CPU port so that the
+ * broadcast frames received on the user port can be forwarded to
+ * the CPU port.
+ */
+ return netc_port_set_fdb_entry(NETC_PORT(priv->ds, cpu_dp->index),
+ bcast, NETC_STANDALONE_PVID);
+}
+
static int netc_setup(struct dsa_switch *ds)
{
struct netc_switch *priv = ds->priv;
@@ -404,19 +635,61 @@ static int netc_setup(struct dsa_switch *ds)
if (err)
return err;
+ INIT_HLIST_HEAD(&priv->fdb_list);
+ mutex_init(&priv->fdbt_lock);
+
netc_switch_fixed_config(priv);
/* default setting for ports */
dsa_switch_for_each_available_port(dp, ds)
netc_port_default_config(priv->ports[dp->index]);
+ err = netc_add_standalone_vlan_entry(priv);
+ if (err)
+ goto free_lock_and_ntmp_user;
+
+ err = netc_add_standalone_fdb_bcast_entry(priv);
+ if (err)
+ goto free_lock_and_ntmp_user;
+
return 0;
+
+free_lock_and_ntmp_user:
+ mutex_destroy(&priv->fdbt_lock);
+ netc_free_ntmp_user(priv);
+
+ return err;
+}
+
+static void netc_destroy_all_lists(struct netc_switch *priv)
+{
+ netc_destroy_fdb_list(priv);
+ mutex_destroy(&priv->fdbt_lock);
+}
+
+static void netc_free_host_flood_rules(struct netc_switch *priv)
+{
+ struct dsa_port *dp;
+
+ dsa_switch_for_each_user_port(dp, priv->ds) {
+ struct netc_port *np = priv->ports[dp->index];
+
+ /* No need to clear the hardware IPFT entry. Because PCIe
+ * FLR will be performed when the switch is re-registered,
+ * it will reset hardware state. So only need to free the
+ * memory to avoid memory leak.
+ */
+ kfree(np->host_flood);
+ np->host_flood = NULL;
+ }
}
static void netc_teardown(struct dsa_switch *ds)
{
struct netc_switch *priv = ds->priv;
+ netc_destroy_all_lists(priv);
+ netc_free_host_flood_rules(priv);
netc_free_ntmp_user(priv);
}
@@ -569,6 +842,261 @@ static void netc_switch_get_ip_revision(struct netc_switch *priv)
priv->revision = val & IPBRR0_IP_REV;
}
+static int netc_port_enable(struct dsa_switch *ds, int port,
+ struct phy_device *phy)
+{
+ struct netc_port *np = NETC_PORT(ds, port);
+ int err;
+
+ if (np->enable)
+ return 0;
+
+ err = clk_prepare_enable(np->ref_clk);
+ if (err) {
+ dev_err(ds->dev,
+ "Failed to enable enet_ref_clk of port %d\n", port);
+ return err;
+ }
+
+ np->enable = true;
+
+ return 0;
+}
+
+static void netc_port_disable(struct dsa_switch *ds, int port)
+{
+ struct netc_port *np = NETC_PORT(ds, port);
+
+ /* When .port_disable() is called, .port_enable() may not have been
+ * called. In this case, both the prepare_count and enable_count of
+ * clock are 0. Calling clk_disable_unprepare() at this time will
+ * cause warnings.
+ */
+ if (!np->enable)
+ return;
+
+ clk_disable_unprepare(np->ref_clk);
+ np->enable = false;
+}
+
+static void netc_port_stp_state_set(struct dsa_switch *ds,
+ int port, u8 state)
+{
+ struct netc_port *np = NETC_PORT(ds, port);
+ u32 val;
+
+ switch (state) {
+ case BR_STATE_DISABLED:
+ case BR_STATE_LISTENING:
+ case BR_STATE_BLOCKING:
+ val = NETC_STG_STATE_DISABLED;
+ break;
+ case BR_STATE_LEARNING:
+ val = NETC_STG_STATE_LEARNING;
+ break;
+ case BR_STATE_FORWARDING:
+ val = NETC_STG_STATE_FORWARDING;
+ break;
+ default:
+ return;
+ }
+
+ netc_port_wr(np, NETC_BPSTGSR, val);
+}
+
+static int netc_port_change_mtu(struct dsa_switch *ds,
+ int port, int mtu)
+{
+ u32 max_frame_size = mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
+ struct netc_port *np = NETC_PORT(ds, port);
+
+ if (dsa_is_cpu_port(ds, port))
+ max_frame_size += NETC_TAG_MAX_LEN;
+
+ netc_port_set_max_frame_size(np, max_frame_size);
+
+ return 0;
+}
+
+static int netc_port_max_mtu(struct dsa_switch *ds, int port)
+{
+ return NETC_MAX_FRAME_LEN - VLAN_ETH_HLEN - ETH_FCS_LEN;
+}
+
+static int netc_port_fdb_add(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid,
+ struct dsa_db db)
+{
+ struct netc_port *np = NETC_PORT(ds, port);
+
+ /* Currently, we only support standalone port mode, so all VLANs
+ * should be converted to NETC_STANDALONE_PVID.
+ */
+ return netc_port_set_fdb_entry(np, addr, NETC_STANDALONE_PVID);
+}
+
+static int netc_port_fdb_del(struct dsa_switch *ds, int port,
+ const unsigned char *addr, u16 vid,
+ struct dsa_db db)
+{
+ struct netc_port *np = NETC_PORT(ds, port);
+
+ return netc_port_del_fdb_entry(np, addr, NETC_STANDALONE_PVID);
+}
+
+static int netc_port_fdb_dump(struct dsa_switch *ds, int port,
+ dsa_fdb_dump_cb_t *cb, void *data)
+{
+ struct netc_switch *priv = ds->priv;
+ u32 resume_eid = NTMP_NULL_ENTRY_ID;
+ struct fdbt_entry_data *entry;
+ struct fdbt_keye_data *keye;
+ struct fdbt_cfge_data *cfge;
+ bool is_static;
+ u32 cfg;
+ int err;
+ u16 vid;
+
+ entry = kmalloc_obj(*entry);
+ if (!entry)
+ return -ENOMEM;
+
+ keye = &entry->keye;
+ cfge = &entry->cfge;
+ mutex_lock(&priv->fdbt_lock);
+
+ do {
+ memset(entry, 0, sizeof(*entry));
+ err = ntmp_fdbt_search_port_entry(&priv->ntmp, port,
+ &resume_eid, entry);
+ if (err || entry->entry_id == NTMP_NULL_ENTRY_ID)
+ break;
+
+ cfg = le32_to_cpu(cfge->cfg);
+ is_static = (cfg & FDBT_DYNAMIC) ? false : true;
+ vid = le16_to_cpu(keye->fid);
+
+ err = cb(keye->mac_addr, vid, is_static, data);
+ if (err)
+ break;
+ } while (resume_eid != NTMP_NULL_ENTRY_ID);
+
+ mutex_unlock(&priv->fdbt_lock);
+ kfree(entry);
+
+ return err;
+}
+
+static int netc_port_mdb_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_mdb *mdb,
+ struct dsa_db db)
+{
+ return netc_port_fdb_add(ds, port, mdb->addr, mdb->vid, db);
+}
+
+static int netc_port_mdb_del(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_mdb *mdb,
+ struct dsa_db db)
+{
+ return netc_port_fdb_del(ds, port, mdb->addr, mdb->vid, db);
+}
+
+static int netc_port_add_host_flood_rule(struct netc_port *np,
+ bool uc, bool mc)
+{
+ const u8 dmac_mask[ETH_ALEN] = {0x1, 0, 0, 0, 0, 0};
+ struct netc_switch *priv = np->switch_priv;
+ struct ipft_entry_data *host_flood;
+ struct ipft_keye_data *keye;
+ struct ipft_cfge_data *cfge;
+ u16 src_port;
+ u32 cfg;
+ int err;
+
+ if (!uc && !mc)
+ return 0;
+
+ host_flood = kzalloc_obj(*host_flood);
+ if (!host_flood)
+ return -ENOMEM;
+
+ keye = &host_flood->keye;
+ cfge = &host_flood->cfge;
+
+ src_port = FIELD_PREP(IPFT_SRC_PORT, np->dp->index);
+ src_port |= IPFT_SRC_PORT_MASK;
+ keye->src_port = cpu_to_le16(src_port);
+
+ /* If either only unicast or only multicast need to be flooded
+ * to the host, we always set the mask that tests the first MAC
+ * DA octet. The value should be 0 for the first bit (if unicast
+ * has to be flooded) or 1 (if multicast). If both unicast and
+ * multicast have to be flooded, we leave the key mask empty, so
+ * it matches everything.
+ */
+ if (uc && !mc)
+ ether_addr_copy(keye->dmac_mask, dmac_mask);
+
+ if (!uc && mc) {
+ ether_addr_copy(keye->dmac, dmac_mask);
+ ether_addr_copy(keye->dmac_mask, dmac_mask);
+ }
+
+ cfg = FIELD_PREP(IPFT_FLTFA, IPFT_FLTFA_REDIRECT);
+ cfg |= FIELD_PREP(IPFT_HR, NETC_HR_HOST_FLOOD);
+ cfge->cfg = cpu_to_le32(cfg);
+
+ err = ntmp_ipft_add_entry(&priv->ntmp, host_flood);
+ if (err) {
+ kfree(host_flood);
+ return err;
+ }
+
+ np->uc = uc;
+ np->mc = mc;
+ np->host_flood = host_flood;
+ /* Enable ingress port filter table lookup */
+ netc_port_wr(np, NETC_PIPFCR, PIPFCR_EN);
+
+ return 0;
+}
+
+static void netc_port_remove_host_flood(struct netc_port *np)
+{
+ struct netc_switch *priv = np->switch_priv;
+
+ if (!np->host_flood)
+ return;
+
+ ntmp_ipft_delete_entry(&priv->ntmp, np->host_flood->entry_id);
+ kfree(np->host_flood);
+ np->host_flood = NULL;
+ np->uc = false;
+ np->mc = false;
+ /* Disable ingress port filter table lookup */
+ netc_port_wr(np, NETC_PIPFCR, 0);
+}
+
+static void netc_port_set_host_flood(struct dsa_switch *ds, int port,
+ bool uc, bool mc)
+{
+ struct netc_port *np = NETC_PORT(ds, port);
+
+ if (np->uc == uc && np->mc == mc)
+ return;
+
+ /* IPFT does not support in-place updates to the KEYE element,
+ * so we need to delete the old IPFT entry and then add a new
+ * one.
+ */
+ if (np->host_flood)
+ netc_port_remove_host_flood(np);
+
+ if (netc_port_add_host_flood_rule(np, uc, mc))
+ dev_err(ds->dev, "Failed to add host flood rule on port %d\n",
+ port);
+}
+
static void netc_phylink_get_caps(struct dsa_switch *ds, int port,
struct phylink_config *config)
{
@@ -751,6 +1279,17 @@ static const struct dsa_switch_ops netc_switch_ops = {
.setup = netc_setup,
.teardown = netc_teardown,
.phylink_get_caps = netc_phylink_get_caps,
+ .port_enable = netc_port_enable,
+ .port_disable = netc_port_disable,
+ .port_stp_state_set = netc_port_stp_state_set,
+ .port_change_mtu = netc_port_change_mtu,
+ .port_max_mtu = netc_port_max_mtu,
+ .port_fdb_add = netc_port_fdb_add,
+ .port_fdb_del = netc_port_fdb_del,
+ .port_fdb_dump = netc_port_fdb_dump,
+ .port_mdb_add = netc_port_mdb_add,
+ .port_mdb_del = netc_port_mdb_del,
+ .port_set_host_flood = netc_port_set_host_flood,
};
static int netc_switch_probe(struct pci_dev *pdev,
@@ -792,6 +1331,7 @@ static int netc_switch_probe(struct pci_dev *pdev,
ds->num_tx_queues = NETC_TC_NUM;
ds->ops = &netc_switch_ops;
ds->phylink_mac_ops = &netc_phylink_mac_ops;
+ ds->fdb_isolation = true;
ds->priv = priv;
priv->ds = ds;
diff --git a/drivers/net/dsa/netc/netc_switch.h b/drivers/net/dsa/netc/netc_switch.h
index eb65c36ecead..4b229a71578e 100644
--- a/drivers/net/dsa/netc/netc_switch.h
+++ b/drivers/net/dsa/netc/netc_switch.h
@@ -30,6 +30,8 @@
#define NETC_MAX_FRAME_LEN 9600
+#define NETC_STANDALONE_PVID 0
+
struct netc_switch;
struct netc_switch_info {
@@ -43,6 +45,11 @@ struct netc_port_caps {
u32 pseudo_link:1;
};
+enum netc_host_reason {
+ /* Software defined host reasons */
+ NETC_HR_HOST_FLOOD = 8,
+};
+
struct netc_port {
void __iomem *iobase;
struct netc_switch *switch_priv;
@@ -50,6 +57,11 @@ struct netc_port {
struct dsa_port *dp;
struct clk *ref_clk; /* RGMII/RMII reference clock */
struct mii_bus *emdio;
+
+ u16 enable:1;
+ u16 uc:1;
+ u16 mc:1;
+ struct ipft_entry_data *host_flood;
};
struct netc_switch_regs {
@@ -58,6 +70,13 @@ struct netc_switch_regs {
void __iomem *global;
};
+struct netc_fdb_entry {
+ u32 entry_id;
+ struct fdbt_cfge_data cfge;
+ struct fdbt_keye_data keye;
+ struct hlist_node node;
+};
+
struct netc_switch {
struct pci_dev *pdev;
struct device *dev;
@@ -69,6 +88,8 @@ struct netc_switch {
struct netc_port **ports;
struct ntmp_user ntmp;
+ struct hlist_head fdb_list;
+ struct mutex fdbt_lock; /* FDB table lock */
};
#define NETC_PRIV(ds) ((struct netc_switch *)((ds)->priv))
@@ -91,6 +112,18 @@ static inline bool is_netc_pseudo_port(struct netc_port *np)
return np->caps.pseudo_link;
}
+static inline void netc_add_fdb_entry(struct netc_switch *priv,
+ struct netc_fdb_entry *entry)
+{
+ hlist_add_head(&entry->node, &priv->fdb_list);
+}
+
+static inline void netc_del_fdb_entry(struct netc_fdb_entry *entry)
+{
+ hlist_del(&entry->node);
+ kfree(entry);
+}
+
int netc_switch_platform_probe(struct netc_switch *priv);
#endif
diff --git a/drivers/net/dsa/netc/netc_switch_hw.h b/drivers/net/dsa/netc/netc_switch_hw.h
index 881122004644..c6a0c0a8ff8a 100644
--- a/drivers/net/dsa/netc/netc_switch_hw.h
+++ b/drivers/net/dsa/netc/netc_switch_hw.h
@@ -67,6 +67,9 @@
#define PQOSMR_VQMP GENMASK(19, 16)
#define PQOSMR_QVMP GENMASK(23, 20)
+#define NETC_PIPFCR 0x0084
+#define PIPFCR_EN BIT(0)
+
#define NETC_POR 0x100
#define PCR_TXDIS BIT(0)
#define PCR_RXDIS BIT(1)
@@ -122,6 +125,14 @@ enum netc_mfo {
#define BPDVR_RXVAM BIT(24)
#define BPDVR_TXTAGA GENMASK(26, 25)
+#define NETC_BPSTGSR 0x520
+
+enum netc_stg_stage {
+ NETC_STG_STATE_DISABLED = 0,
+ NETC_STG_STATE_LEARNING,
+ NETC_STG_STATE_FORWARDING,
+};
+
/* Definition of Switch ethernet MAC port registers */
#define NETC_PMAC_OFFSET 0x400
#define NETC_PM_CMD_CFG(a) (0x1008 + (a) * 0x400)
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v3 net-next 13/14] net: dsa: netc: initialize buffer bool table and implement flow-control
2026-03-26 6:29 [PATCH v3 net-next 00/14] Add preliminary NETC switch support for i.MX94 Wei Fang
` (11 preceding siblings ...)
2026-03-26 6:29 ` [PATCH v3 net-next 12/14] net: dsa: netc: add more basic functions support Wei Fang
@ 2026-03-26 6:29 ` Wei Fang
2026-03-26 6:29 ` [PATCH v3 net-next 14/14] net: dsa: netc: add support for the standardized counters Wei Fang
13 siblings, 0 replies; 16+ messages in thread
From: Wei Fang @ 2026-03-26 6:29 UTC (permalink / raw)
To: claudiu.manoil, vladimir.oltean, xiaoning.wang, andrew+netdev,
davem, edumazet, kuba, pabeni, robh, krzk+dt, conor+dt,
f.fainelli, frank.li, chleroy, horms, linux, andrew
Cc: netdev, linux-kernel, devicetree, linuxppc-dev, linux-arm-kernel,
imx
The buffer pool is a quantity of memory available for buffering a group
of flows (e.g. frames having the same priority, frames received from the
same port), while waiting to be transmitted on a port. The buffer pool
tracks internal memory consumption with upper bound limits and optionally
a non-shared portion when associated with a shared buffer pool. Currently
the shared buffer pool is not supported, it will be added in the future.
For i.MX94, the switch has 4 ports and 8 buffer pools, so each port is
allocated two buffer pools. For frames with priorities of 0 to 3, they
will be mapped to the first buffer pool; For frames with priorities of
4 to 7, they will be mapped to the second buffer pool. Each buffer pool
has a flow control on threshold and a flow control off threshold. By
setting these threshold, add the flow control support to each port.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
---
drivers/net/dsa/netc/netc_main.c | 163 ++++++++++++++++++++++++++
drivers/net/dsa/netc/netc_switch.h | 9 ++
drivers/net/dsa/netc/netc_switch_hw.h | 13 ++
3 files changed, 185 insertions(+)
diff --git a/drivers/net/dsa/netc/netc_main.c b/drivers/net/dsa/netc/netc_main.c
index 3609d83ac363..62611263a93f 100644
--- a/drivers/net/dsa/netc/netc_main.c
+++ b/drivers/net/dsa/netc/netc_main.c
@@ -379,6 +379,8 @@ static void netc_port_set_mlo(struct netc_port *np, enum netc_mlo mlo)
static void netc_port_fixed_config(struct netc_port *np)
{
+ u32 pqnt = 0xffff, qth = 0xff00;
+
/* Default IPV and DR setting */
netc_port_rmw(np, NETC_PQOSMR, PQOSMR_VS | PQOSMR_VE,
PQOSMR_VS | PQOSMR_VE);
@@ -386,6 +388,15 @@ static void netc_port_fixed_config(struct netc_port *np)
/* Enable L2 and L3 DOS */
netc_port_rmw(np, NETC_PCR, PCR_L2DOSE | PCR_L3DOSE,
PCR_L2DOSE | PCR_L3DOSE);
+
+ /* Set the quanta value of TX PAUSE frame */
+ netc_mac_port_wr(np, NETC_PM_PAUSE_QUANTA(0), pqnt);
+
+ /* When a quanta timer counts down and reaches this value,
+ * the MAC sends a refresh PAUSE frame with the programmed
+ * full quanta value if a pause condition still exists.
+ */
+ netc_mac_port_wr(np, NETC_PM_PAUSE_TRHESH(0), qth);
}
static void netc_port_default_config(struct netc_port *np)
@@ -617,6 +628,117 @@ static int netc_add_standalone_fdb_bcast_entry(struct netc_switch *priv)
bcast, NETC_STANDALONE_PVID);
}
+static u32 netc_get_buffer_pool_num(struct netc_switch *priv)
+{
+ return netc_base_rd(&priv->regs, NETC_BPCAPR) & BPCAPR_NUM_BP;
+}
+
+static void netc_port_set_pbpmcr(struct netc_port *np, u64 mapping)
+{
+ u32 pbpmcr0 = lower_32_bits(mapping);
+ u32 pbpmcr1 = upper_32_bits(mapping);
+
+ netc_port_wr(np, NETC_PBPMCR0, pbpmcr0);
+ netc_port_wr(np, NETC_PBPMCR1, pbpmcr1);
+}
+
+static void netc_ipv_to_buffer_pool_mapping(struct netc_switch *priv)
+{
+ int bp_per_port = priv->num_bp / priv->info->num_ports;
+ int q, r, num, i, ipv;
+ u32 bp_id;
+
+ if (!bp_per_port) {
+ q = priv->info->num_ports / priv->num_bp;
+ r = priv->info->num_ports % priv->num_bp;
+ num = (q + 1) * r;
+
+ /* Multiple ports share a buffer pool, the mapping relationship
+ * between ports and buffer pools is as follows:
+ *
+ * - For the first 'r' buffer pools, each buffer pool is shared
+ * by 'q + 1' ports.
+ * - After that, each buffer pool is share by 'q' ports.
+ * - All IPVs of a port are mapped to the same buffer pool.
+ */
+ for (i = 0; i < priv->info->num_ports; i++) {
+ u64 mapping = 0;
+
+ if (i < num)
+ bp_id = i / (q + 1);
+ else
+ bp_id = r + (i - num) / q;
+
+ for (ipv = 0; ipv < NETC_IPV_NUM; ipv++)
+ mapping |= (u64)bp_id << (ipv * 8);
+
+ netc_port_set_pbpmcr(priv->ports[i], mapping);
+ }
+
+ return;
+ }
+
+ q = NETC_IPV_NUM / bp_per_port;
+ r = NETC_IPV_NUM % bp_per_port;
+ num = q + r;
+
+ /* IPV-to–buffer-pool mapping per port:
+ * Each port is allocated 'bp_per_port' buffer pools and supports 8
+ * IPVs, where a higher IPV indicates a higher frame priority. Each
+ * IPV can be mapped to only one buffer pool.
+ *
+ * The mapping rule is as follows:
+ * - The first 'num' IPVs share the port's first buffer pool (index
+ * 'base_id').
+ * - After that, every 'q' IPVs share one buffer pool, with pool
+ * indices increasing sequentially.
+ */
+ for (i = 0; i < priv->info->num_ports; i++) {
+ u32 base_id = i * bp_per_port;
+ u64 mapping = 0;
+
+ bp_id = base_id;
+
+ for (ipv = 0; ipv < NETC_IPV_NUM; ipv++) {
+ /* Update the buffer pool index */
+ if (ipv >= num)
+ bp_id = base_id + ((ipv - num) / q) + 1;
+
+ mapping |= (u64)bp_id << (ipv * 8);
+ }
+
+ netc_port_set_pbpmcr(priv->ports[i], mapping);
+ }
+}
+
+static int netc_switch_bpt_default_config(struct netc_switch *priv)
+{
+ /* priv->num_bp is read from register, its value is hardcoded as
+ * a non-zero value.
+ */
+ priv->num_bp = netc_get_buffer_pool_num(priv);
+ priv->bpt_list = devm_kcalloc(priv->dev, priv->num_bp,
+ sizeof(struct bpt_cfge_data),
+ GFP_KERNEL);
+ if (!priv->bpt_list)
+ return -ENOMEM;
+
+ /* Initialize the maximum threshold of each buffer pool entry */
+ for (int i = 0; i < priv->num_bp; i++) {
+ struct bpt_cfge_data *cfge = &priv->bpt_list[i];
+ int err;
+
+ cfge->max_thresh = cpu_to_le16(NETC_BP_THRESH);
+ err = ntmp_bpt_update_entry(&priv->ntmp, i, cfge);
+ if (err)
+ return err;
+ }
+
+ netc_ipv_to_buffer_pool_mapping(priv);
+
+ return 0;
+}
+
static int netc_setup(struct dsa_switch *ds)
{
struct netc_switch *priv = ds->priv;
@@ -644,6 +766,10 @@ static int netc_setup(struct dsa_switch *ds)
dsa_switch_for_each_available_port(dp, ds)
netc_port_default_config(priv->ports[dp->index]);
+ err = netc_switch_bpt_default_config(priv);
+ if (err)
+ goto free_lock_and_ntmp_user;
+
err = netc_add_standalone_vlan_entry(priv);
if (err)
goto free_lock_and_ntmp_user;
@@ -1195,6 +1321,41 @@ static void netc_port_set_rmii_mii_mac(struct netc_port *np,
netc_mac_port_rmw(np, NETC_PM_IF_MODE(0), mask, val);
}
+static void netc_port_set_tx_pause(struct netc_port *np, bool tx_pause)
+{
+ struct netc_switch *priv = np->switch_priv;
+ int port = np->dp->index;
+ int i, j, num_bp;
+
+ num_bp = priv->num_bp / priv->info->num_ports;
+ for (i = 0, j = port * num_bp; i < num_bp; i++, j++) {
+ struct bpt_cfge_data *cfge = &priv->bpt_list[j];
+ struct bpt_cfge_data old_cfge = *cfge;
+
+ if (tx_pause) {
+ cfge->fc_on_thresh = cpu_to_le16(NETC_FC_THRESH_ON);
+ cfge->fc_off_thresh = cpu_to_le16(NETC_FC_THRESH_OFF);
+ cfge->fccfg_sbpen = FIELD_PREP(BPT_FC_CFG,
+ BPT_FC_CFG_EN_BPFC);
+ cfge->fc_ports = cpu_to_le32(BIT(port));
+ } else {
+ cfge->fc_on_thresh = cpu_to_le16(0);
+ cfge->fc_off_thresh = cpu_to_le16(0);
+ cfge->fccfg_sbpen = 0;
+ cfge->fc_ports = cpu_to_le32(0);
+ }
+
+ if (ntmp_bpt_update_entry(&priv->ntmp, j, cfge))
+ *cfge = old_cfge;
+ }
+}
+
+static void netc_port_set_rx_pause(struct netc_port *np, bool rx_pause)
+{
+ netc_mac_port_rmw(np, NETC_PM_CMD_CFG(0), PM_CMD_CFG_PAUSE_IGN,
+ rx_pause ? 0 : PM_CMD_CFG_PAUSE_IGN);
+}
+
static void netc_port_mac_rx_enable(struct netc_port *np)
{
netc_port_rmw(np, NETC_POR, PCR_RXDIS, 0);
@@ -1256,6 +1417,8 @@ static void netc_mac_link_up(struct phylink_config *config,
interface == PHY_INTERFACE_MODE_MII)
netc_port_set_rmii_mii_mac(np, speed, duplex);
+ netc_port_set_tx_pause(np, tx_pause);
+ netc_port_set_rx_pause(np, rx_pause);
netc_port_mac_rx_enable(np);
}
diff --git a/drivers/net/dsa/netc/netc_switch.h b/drivers/net/dsa/netc/netc_switch.h
index 4b229a71578e..7ebffb136b2f 100644
--- a/drivers/net/dsa/netc/netc_switch.h
+++ b/drivers/net/dsa/netc/netc_switch.h
@@ -32,6 +32,12 @@
#define NETC_STANDALONE_PVID 0
+#define NETC_IPV_NUM 8
+/* MANT = bits 11:4, EXP = bits 3:0, threshold = MANT * 2 ^ EXP */
+#define NETC_BP_THRESH 0x334
+#define NETC_FC_THRESH_ON 0x533
+#define NETC_FC_THRESH_OFF 0x3c3
+
struct netc_switch;
struct netc_switch_info {
@@ -90,6 +96,9 @@ struct netc_switch {
struct ntmp_user ntmp;
struct hlist_head fdb_list;
struct mutex fdbt_lock; /* FDB table lock */
+
+ u32 num_bp;
+ struct bpt_cfge_data *bpt_list;
};
#define NETC_PRIV(ds) ((struct netc_switch *)((ds)->priv))
diff --git a/drivers/net/dsa/netc/netc_switch_hw.h b/drivers/net/dsa/netc/netc_switch_hw.h
index c6a0c0a8ff8a..1e1c0d279a21 100644
--- a/drivers/net/dsa/netc/netc_switch_hw.h
+++ b/drivers/net/dsa/netc/netc_switch_hw.h
@@ -12,6 +12,12 @@
#define NETC_SWITCH_DEVICE_ID 0xeef2
/* Definition of Switch base registers */
+#define NETC_BPCAPR 0x0008
+#define BPCAPR_NUM_BP GENMASK(7, 0)
+
+#define NETC_PBPMCR0 0x0400
+#define NETC_PBPMCR1 0x0404
+
#define NETC_CBDRMR(a) (0x0800 + (a) * 0x30)
#define NETC_CBDRBAR0(a) (0x0810 + (a) * 0x30)
#define NETC_CBDRBAR1(a) (0x0814 + (a) * 0x30)
@@ -138,6 +144,7 @@ enum netc_stg_stage {
#define NETC_PM_CMD_CFG(a) (0x1008 + (a) * 0x400)
#define PM_CMD_CFG_TX_EN BIT(0)
#define PM_CMD_CFG_RX_EN BIT(1)
+#define PM_CMD_CFG_PAUSE_IGN BIT(8)
#define NETC_PM_MAXFRM(a) (0x1014 + (a) * 0x400)
#define PM_MAXFRAM GENMASK(15, 0)
@@ -145,6 +152,12 @@ enum netc_stg_stage {
#define NETC_PM_IEVENT(a) (0x1040 + (a) * 0x400)
#define PM_IEVENT_RX_EMPTY BIT(6)
+#define NETC_PM_PAUSE_QUANTA(a) (0x1054 + (a) * 0x400)
+#define PAUSE_QUANTA_PQNT GENMASK(15, 0)
+
+#define NETC_PM_PAUSE_TRHESH(a) (0x1064 + (a) * 0x400)
+#define PAUSE_TRHESH_QTH GENMASK(15, 0)
+
#define NETC_PM_IF_MODE(a) (0x1300 + (a) * 0x400)
#define PM_IF_MODE_IFMODE GENMASK(2, 0)
#define IFMODE_MII 1
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v3 net-next 14/14] net: dsa: netc: add support for the standardized counters
2026-03-26 6:29 [PATCH v3 net-next 00/14] Add preliminary NETC switch support for i.MX94 Wei Fang
` (12 preceding siblings ...)
2026-03-26 6:29 ` [PATCH v3 net-next 13/14] net: dsa: netc: initialize buffer bool table and implement flow-control Wei Fang
@ 2026-03-26 6:29 ` Wei Fang
13 siblings, 0 replies; 16+ messages in thread
From: Wei Fang @ 2026-03-26 6:29 UTC (permalink / raw)
To: claudiu.manoil, vladimir.oltean, xiaoning.wang, andrew+netdev,
davem, edumazet, kuba, pabeni, robh, krzk+dt, conor+dt,
f.fainelli, frank.li, chleroy, horms, linux, andrew
Cc: netdev, linux-kernel, devicetree, linuxppc-dev, linux-arm-kernel,
imx
Each user port of the NETC switch supports 802.3 basic and mandatory
managed objects statistic counters and IETF Management Information
Database (MIB) package (RFC2665) and Remote Network Monitoring (RMON)
counters. And all of these counters are 64-bit registers. In addition,
some user ports support preemption, so these ports have two MACs, MAC
0 is the express MAC (eMAC), MAC 1 is the preemptible MAC (pMAC). So
for ports that support preemption, the statistics are the sum of the
pMAC and eMAC statistics.
Note that the current switch driver does not support preemption, all
frames are sent and received via the eMAC by default. The statistics
read from the pMAC should be zero.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
---
drivers/net/dsa/netc/Makefile | 2 +-
drivers/net/dsa/netc/netc_ethtool.c | 192 ++++++++++++++++++++++++++
drivers/net/dsa/netc/netc_main.c | 4 +
drivers/net/dsa/netc/netc_switch.h | 17 +++
drivers/net/dsa/netc/netc_switch_hw.h | 153 ++++++++++++++++++++
include/linux/fsl/netc_global.h | 6 +
6 files changed, 373 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/dsa/netc/netc_ethtool.c
diff --git a/drivers/net/dsa/netc/Makefile b/drivers/net/dsa/netc/Makefile
index 4a5767562574..f40b13c702e0 100644
--- a/drivers/net/dsa/netc/Makefile
+++ b/drivers/net/dsa/netc/Makefile
@@ -1,3 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_NET_DSA_NETC_SWITCH) += nxp-netc-switch.o
-nxp-netc-switch-objs := netc_main.o netc_platform.o
+nxp-netc-switch-objs := netc_main.o netc_platform.o netc_ethtool.o
diff --git a/drivers/net/dsa/netc/netc_ethtool.c b/drivers/net/dsa/netc/netc_ethtool.c
new file mode 100644
index 000000000000..8e5861543d30
--- /dev/null
+++ b/drivers/net/dsa/netc/netc_ethtool.c
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * NXP NETC switch driver
+ * Copyright 2025-2026 NXP
+ */
+
+#include <linux/ethtool_netlink.h>
+
+#include "netc_switch.h"
+
+static void netc_port_pause_stats(struct netc_port *np,
+ enum netc_port_mac mac,
+ struct ethtool_pause_stats *stats)
+{
+ if (mac == NETC_PORT_PMAC && !np->caps.pmac)
+ return;
+
+ stats->tx_pause_frames = netc_port_rd64(np, NETC_PM_TXPF(mac));
+ stats->rx_pause_frames = netc_port_rd64(np, NETC_PM_RXPF(mac));
+}
+
+void netc_port_get_pause_stats(struct dsa_switch *ds, int port,
+ struct ethtool_pause_stats *pause_stats)
+{
+ struct netc_port *np = NETC_PORT(ds, port);
+ struct net_device *ndev;
+
+ switch (pause_stats->src) {
+ case ETHTOOL_MAC_STATS_SRC_EMAC:
+ netc_port_pause_stats(np, NETC_PORT_EMAC, pause_stats);
+ break;
+ case ETHTOOL_MAC_STATS_SRC_PMAC:
+ netc_port_pause_stats(np, NETC_PORT_PMAC, pause_stats);
+ break;
+ case ETHTOOL_MAC_STATS_SRC_AGGREGATE:
+ ndev = dsa_to_port(ds, port)->user;
+ ethtool_aggregate_pause_stats(ndev, pause_stats);
+ break;
+ }
+}
+
+static const struct ethtool_rmon_hist_range netc_rmon_ranges[] = {
+ { 64, 64 },
+ { 65, 127 },
+ { 128, 255 },
+ { 256, 511 },
+ { 512, 1023 },
+ { 1024, 1522 },
+ { 1523, NETC_MAX_FRAME_LEN },
+ { }
+};
+
+static void netc_port_rmon_stats(struct netc_port *np,
+ enum netc_port_mac mac,
+ struct ethtool_rmon_stats *stats)
+{
+ if (mac == NETC_PORT_PMAC && !np->caps.pmac)
+ return;
+
+ stats->undersize_pkts = netc_port_rd64(np, NETC_PM_RUND(mac));
+ stats->oversize_pkts = netc_port_rd64(np, NETC_PM_ROVR(mac));
+ stats->fragments = netc_port_rd64(np, NETC_PM_RFRG(mac));
+ stats->jabbers = netc_port_rd64(np, NETC_PM_RJBR(mac));
+
+ stats->hist[0] = netc_port_rd64(np, NETC_PM_R64(mac));
+ stats->hist[1] = netc_port_rd64(np, NETC_PM_R127(mac));
+ stats->hist[2] = netc_port_rd64(np, NETC_PM_R255(mac));
+ stats->hist[3] = netc_port_rd64(np, NETC_PM_R511(mac));
+ stats->hist[4] = netc_port_rd64(np, NETC_PM_R1023(mac));
+ stats->hist[5] = netc_port_rd64(np, NETC_PM_R1522(mac));
+ stats->hist[6] = netc_port_rd64(np, NETC_PM_R1523X(mac));
+
+ stats->hist_tx[0] = netc_port_rd64(np, NETC_PM_T64(mac));
+ stats->hist_tx[1] = netc_port_rd64(np, NETC_PM_T127(mac));
+ stats->hist_tx[2] = netc_port_rd64(np, NETC_PM_T255(mac));
+ stats->hist_tx[3] = netc_port_rd64(np, NETC_PM_T511(mac));
+ stats->hist_tx[4] = netc_port_rd64(np, NETC_PM_T1023(mac));
+ stats->hist_tx[5] = netc_port_rd64(np, NETC_PM_T1522(mac));
+ stats->hist_tx[6] = netc_port_rd64(np, NETC_PM_T1523X(mac));
+}
+
+void netc_port_get_rmon_stats(struct dsa_switch *ds, int port,
+ struct ethtool_rmon_stats *rmon_stats,
+ const struct ethtool_rmon_hist_range **ranges)
+{
+ struct netc_port *np = NETC_PORT(ds, port);
+ struct net_device *ndev;
+
+ *ranges = netc_rmon_ranges;
+
+ switch (rmon_stats->src) {
+ case ETHTOOL_MAC_STATS_SRC_EMAC:
+ netc_port_rmon_stats(np, NETC_PORT_EMAC, rmon_stats);
+ break;
+ case ETHTOOL_MAC_STATS_SRC_PMAC:
+ netc_port_rmon_stats(np, NETC_PORT_PMAC, rmon_stats);
+ break;
+ case ETHTOOL_MAC_STATS_SRC_AGGREGATE:
+ ndev = dsa_to_port(ds, port)->user;
+ ethtool_aggregate_rmon_stats(ndev, rmon_stats);
+ break;
+ }
+}
+
+static void netc_port_ctrl_stats(struct netc_port *np,
+ enum netc_port_mac mac,
+ struct ethtool_eth_ctrl_stats *stats)
+{
+ if (mac == NETC_PORT_PMAC && !np->caps.pmac)
+ return;
+
+ stats->MACControlFramesTransmitted =
+ netc_port_rd64(np, NETC_PM_TCNP(mac));
+ stats->MACControlFramesReceived =
+ netc_port_rd64(np, NETC_PM_RCNP(mac));
+}
+
+void netc_port_get_eth_ctrl_stats(struct dsa_switch *ds, int port,
+ struct ethtool_eth_ctrl_stats *ctrl_stats)
+{
+ struct netc_port *np = NETC_PORT(ds, port);
+ struct net_device *ndev;
+
+ switch (ctrl_stats->src) {
+ case ETHTOOL_MAC_STATS_SRC_EMAC:
+ netc_port_ctrl_stats(np, NETC_PORT_EMAC, ctrl_stats);
+ break;
+ case ETHTOOL_MAC_STATS_SRC_PMAC:
+ netc_port_ctrl_stats(np, NETC_PORT_PMAC, ctrl_stats);
+ break;
+ case ETHTOOL_MAC_STATS_SRC_AGGREGATE:
+ ndev = dsa_to_port(ds, port)->user;
+ ethtool_aggregate_ctrl_stats(ndev, ctrl_stats);
+ break;
+ }
+}
+
+static void netc_port_mac_stats(struct netc_port *np,
+ enum netc_port_mac mac,
+ struct ethtool_eth_mac_stats *stats)
+{
+ if (mac == NETC_PORT_PMAC && !np->caps.pmac)
+ return;
+
+ stats->FramesTransmittedOK = netc_port_rd64(np, NETC_PM_TFRM(mac));
+ stats->SingleCollisionFrames = netc_port_rd64(np, NETC_PM_TSCOL(mac));
+ stats->MultipleCollisionFrames =
+ netc_port_rd64(np, NETC_PM_TMCOL(mac));
+ stats->FramesReceivedOK = netc_port_rd64(np, NETC_PM_RFRM(mac));
+ stats->FrameCheckSequenceErrors =
+ netc_port_rd64(np, NETC_PM_RFCS(mac));
+ stats->AlignmentErrors = netc_port_rd64(np, NETC_PM_RALN(mac));
+ stats->OctetsTransmittedOK = netc_port_rd64(np, NETC_PM_TEOCT(mac));
+ stats->FramesWithDeferredXmissions =
+ netc_port_rd64(np, NETC_PM_TDFR(mac));
+ stats->LateCollisions = netc_port_rd64(np, NETC_PM_TLCOL(mac));
+ stats->FramesAbortedDueToXSColls =
+ netc_port_rd64(np, NETC_PM_TECOL(mac));
+ stats->FramesLostDueToIntMACXmitError =
+ netc_port_rd64(np, NETC_PM_TERR(mac));
+ stats->OctetsReceivedOK = netc_port_rd64(np, NETC_PM_REOCT(mac));
+ stats->FramesLostDueToIntMACRcvError =
+ netc_port_rd64(np, NETC_PM_RDRNTP(mac));
+ stats->MulticastFramesXmittedOK =
+ netc_port_rd64(np, NETC_PM_TMCA(mac));
+ stats->BroadcastFramesXmittedOK =
+ netc_port_rd64(np, NETC_PM_TBCA(mac));
+ stats->MulticastFramesReceivedOK =
+ netc_port_rd64(np, NETC_PM_RMCA(mac));
+ stats->BroadcastFramesReceivedOK =
+ netc_port_rd64(np, NETC_PM_RBCA(mac));
+}
+
+void netc_port_get_eth_mac_stats(struct dsa_switch *ds, int port,
+ struct ethtool_eth_mac_stats *mac_stats)
+{
+ struct netc_port *np = NETC_PORT(ds, port);
+ struct net_device *ndev;
+
+ switch (mac_stats->src) {
+ case ETHTOOL_MAC_STATS_SRC_EMAC:
+ netc_port_mac_stats(np, NETC_PORT_EMAC, mac_stats);
+ break;
+ case ETHTOOL_MAC_STATS_SRC_PMAC:
+ netc_port_mac_stats(np, NETC_PORT_PMAC, mac_stats);
+ break;
+ case ETHTOOL_MAC_STATS_SRC_AGGREGATE:
+ ndev = dsa_to_port(ds, port)->user;
+ ethtool_aggregate_mac_stats(ndev, mac_stats);
+ break;
+ }
+}
diff --git a/drivers/net/dsa/netc/netc_main.c b/drivers/net/dsa/netc/netc_main.c
index 62611263a93f..9f145082921e 100644
--- a/drivers/net/dsa/netc/netc_main.c
+++ b/drivers/net/dsa/netc/netc_main.c
@@ -1453,6 +1453,10 @@ static const struct dsa_switch_ops netc_switch_ops = {
.port_mdb_add = netc_port_mdb_add,
.port_mdb_del = netc_port_mdb_del,
.port_set_host_flood = netc_port_set_host_flood,
+ .get_pause_stats = netc_port_get_pause_stats,
+ .get_rmon_stats = netc_port_get_rmon_stats,
+ .get_eth_ctrl_stats = netc_port_get_eth_ctrl_stats,
+ .get_eth_mac_stats = netc_port_get_eth_mac_stats,
};
static int netc_switch_probe(struct pci_dev *pdev,
diff --git a/drivers/net/dsa/netc/netc_switch.h b/drivers/net/dsa/netc/netc_switch.h
index 7ebffb136b2f..825601847c89 100644
--- a/drivers/net/dsa/netc/netc_switch.h
+++ b/drivers/net/dsa/netc/netc_switch.h
@@ -70,6 +70,11 @@ struct netc_port {
struct ipft_entry_data *host_flood;
};
+enum netc_port_mac {
+ NETC_PORT_EMAC = 0,
+ NETC_PORT_PMAC,
+};
+
struct netc_switch_regs {
void __iomem *base;
void __iomem *port;
@@ -110,6 +115,7 @@ struct netc_switch {
/* Write/Read registers of Switch Port (including pseudo MAC port) */
#define netc_port_rd(p, o) netc_read((p)->iobase + (o))
+#define netc_port_rd64(p, o) netc_read64((p)->iobase + (o))
#define netc_port_wr(p, o, v) netc_write((p)->iobase + (o), v)
/* Write/Read Switch global registers */
@@ -135,4 +141,15 @@ static inline void netc_del_fdb_entry(struct netc_fdb_entry *entry)
int netc_switch_platform_probe(struct netc_switch *priv);
+/* ethtool APIs */
+void netc_port_get_pause_stats(struct dsa_switch *ds, int port,
+ struct ethtool_pause_stats *pause_stats);
+void netc_port_get_rmon_stats(struct dsa_switch *ds, int port,
+ struct ethtool_rmon_stats *rmon_stats,
+ const struct ethtool_rmon_hist_range **ranges);
+void netc_port_get_eth_ctrl_stats(struct dsa_switch *ds, int port,
+ struct ethtool_eth_ctrl_stats *ctrl_stats);
+void netc_port_get_eth_mac_stats(struct dsa_switch *ds, int port,
+ struct ethtool_eth_mac_stats *mac_stats);
+
#endif
diff --git a/drivers/net/dsa/netc/netc_switch_hw.h b/drivers/net/dsa/netc/netc_switch_hw.h
index 1e1c0d279a21..05a1c3e239fa 100644
--- a/drivers/net/dsa/netc/netc_switch_hw.h
+++ b/drivers/net/dsa/netc/netc_switch_hw.h
@@ -172,6 +172,159 @@ enum netc_stg_stage {
#define SSP_10M 1
#define SSP_1G 2
+/* Port MAC 0/1 Receive Ethernet Octets Counter */
+#define NETC_PM_REOCT(a) (0x1100 + (a) * 0x400)
+
+/* Port MAC 0/1 Receive Octets Counter */
+#define NETC_PM_ROCT(a) (0x1108 + (a) * 0x400)
+
+/* Port MAC 0/1 Receive Alignment Error Counter Register */
+#define NETC_PM_RALN(a) (0x1110 + (a) * 0x400)
+
+/* Port MAC 0/1 Receive Valid Pause Frame Counter */
+#define NETC_PM_RXPF(a) (0x1118 + (a) * 0x400)
+
+/* Port MAC 0/1 Receive Frame Counter */
+#define NETC_PM_RFRM(a) (0x1120 + (a) * 0x400)
+
+/* Port MAC 0/1 Receive Frame Check Sequence Error Counter */
+#define NETC_PM_RFCS(a) (0x1128 + (a) * 0x400)
+
+/* Port MAC 0/1 Receive VLAN Frame Counter */
+#define NETC_PM_RVLAN(a) (0x1130 + (a) * 0x400)
+
+/* Port MAC 0/1 Receive Frame Error Counter */
+#define NETC_PM_RERR(a) (0x1138 + (a) * 0x400)
+
+/* Port MAC 0/1 Receive Unicast Frame Counter */
+#define NETC_PM_RUCA(a) (0x1140 + (a) * 0x400)
+
+/* Port MAC 0/1 Receive Multicast Frame Counter */
+#define NETC_PM_RMCA(a) (0x1148 + (a) * 0x400)
+
+/* Port MAC 0/1 Receive Broadcast Frame Counter */
+#define NETC_PM_RBCA(a) (0x1150 + (a) * 0x400)
+
+/* Port MAC 0/1 Receive Dropped Packets Counter */
+#define NETC_PM_RDRP(a) (0x1158 + (a) * 0x400)
+
+/* Port MAC 0/1 Receive Packets Counter */
+#define NETC_PM_RPKT(a) (0x1160 + (a) * 0x400)
+
+/* Port MAC 0/1 Receive Undersized Packet Counter */
+#define NETC_PM_RUND(a) (0x1168 + (a) * 0x400)
+
+/* Port MAC 0/1 Receive 64-Octet Packet Counter */
+#define NETC_PM_R64(a) (0x1170 + (a) * 0x400)
+
+/* Port MAC 0/1 Receive 65 to 127-Octet Packet Counter */
+#define NETC_PM_R127(a) (0x1178 + (a) * 0x400)
+
+/* Port MAC 0/1 Receive 128 to 255-Octet Packet Counter */
+#define NETC_PM_R255(a) (0x1180 + (a) * 0x400)
+
+/* Port MAC 0/1 Receive 256 to 511-Octet Packet Counter */
+#define NETC_PM_R511(a) (0x1188 + (a) * 0x400)
+
+/* Port MAC 0/1 Receive 512 to 1023-Octet Packet Counter */
+#define NETC_PM_R1023(a) (0x1190 + (a) * 0x400)
+
+/* Port MAC 0/1 Receive 1024 to 1522-Octet Packet Counter */
+#define NETC_PM_R1522(a) (0x1198 + (a) * 0x400)
+
+/* Port MAC 0/1 Receive 1523 to Max-Octet Packet Counter */
+#define NETC_PM_R1523X(a) (0x11a0 + (a) * 0x400)
+
+/* Port MAC 0/1 Receive Oversized Packet Counter */
+#define NETC_PM_ROVR(a) (0x11a8 + (a) * 0x400)
+
+/* Port MAC 0/1 Receive Jabber Packet Counter */
+#define NETC_PM_RJBR(a) (0x11b0 + (a) * 0x400)
+
+/* Port MAC 0/1 Receive Fragment Packet Counter */
+#define NETC_PM_RFRG(a) (0x11b8 + (a) * 0x400)
+
+/* Port MAC 0/1 Receive Control Packet Counter */
+#define NETC_PM_RCNP(a) (0x11c0 + (a) * 0x400)
+
+/* Port MAC 0/1 Receive Dropped Not Truncated Packets Counter */
+#define NETC_PM_RDRNTP(a) (0x11c8 + (a) * 0x400)
+
+/* Port MAC 0/1 Transmit Ethernet Octets Counter */
+#define NETC_PM_TEOCT(a) (0x1200 + (a) * 0x400)
+
+/* Port MAC 0/1 Transmit Octets Counter */
+#define NETC_PM_TOCT(a) (0x1208 + (a) * 0x400)
+
+/* Port MAC 0/1 Transmit Valid Pause Frame Counter */
+#define NETC_PM_TXPF(a) (0x1218 + (a) * 0x400)
+
+/* Port MAC 0/1 Transmit Frame Counter */
+#define NETC_PM_TFRM(a) (0x1220 + (a) * 0x400)
+
+/* Port MAC 0/1 Transmit Frame Check Sequence Error Counter */
+#define NETC_PM_TFCS(a) (0x1228 + (a) * 0x400)
+
+/* Port MAC 0/1 Transmit VLAN Frame Counter */
+#define NETC_PM_TVLAN(a) (0x1230 + (a) * 0x400)
+
+/* Port MAC 0/1 Transmit Frame Error Counter */
+#define NETC_PM_TERR(a) (0x1238 + (a) * 0x400)
+
+/* Port MAC 0/1 Transmit Unicast Frame Counter */
+#define NETC_PM_TUCA(a) (0x1240 + (a) * 0x400)
+
+/* Port MAC 0/1 Transmit Multicast Frame Counter */
+#define NETC_PM_TMCA(a) (0x1248 + (a) * 0x400)
+
+/* Port MAC 0/1 Transmit Broadcast Frame Counter */
+#define NETC_PM_TBCA(a) (0x1250 + (a) * 0x400)
+
+/* Port MAC 0/1 Transmit Packets Counter */
+#define NETC_PM_TPKT(a) (0x1260 + (a) * 0x400)
+
+/* Port MAC 0/1 Transmit Undersized Packet Counter */
+#define NETC_PM_TUND(a) (0x1268 + (a) * 0x400)
+
+/* Port MAC 0/1 Transmit 64-Octet Packet Counter */
+#define NETC_PM_T64(a) (0x1270 + (a) * 0x400)
+
+/* Port MAC 0/1 Transmit 65 to 127-Octet Packet Counter */
+#define NETC_PM_T127(a) (0x1278 + (a) * 0x400)
+
+/* Port MAC 0/1 Transmit 128 to 255-Octet Packet Counter */
+#define NETC_PM_T255(a) (0x1280 + (a) * 0x400)
+
+/* Port MAC 0/1 Transmit 256 to 511-Octet Packet Counter */
+#define NETC_PM_T511(a) (0x1288 + (a) * 0x400)
+
+/* Port MAC 0/1 Transmit 512 to 1023-Octet Packet Counter */
+#define NETC_PM_T1023(a) (0x1290 + (a) * 0x400)
+
+/* Port MAC 0/1 Transmit 1024 to 1522-Octet Packet Counter */
+#define NETC_PM_T1522(a) (0x1298 + (a) * 0x400)
+
+/* Port MAC 0/1 Transmit 1523 to TX_MTU-Octet Packet Counter */
+#define NETC_PM_T1523X(a) (0x12a0 + (a) * 0x400)
+
+/* Port MAC 0/1 Transmit Control Packet Counter */
+#define NETC_PM_TCNP(a) (0x12c0 + (a) * 0x400)
+
+/* Port MAC 0/1 Transmit Deferred Packet Counter */
+#define NETC_PM_TDFR(a) (0x12d0 + (a) * 0x400)
+
+/* Port MAC 0/1 Transmit Multiple Collisions Counter */
+#define NETC_PM_TMCOL(a) (0x12d8 + (a) * 0x400)
+
+/* Port MAC 0/1 Transmit Single Collision */
+#define NETC_PM_TSCOL(a) (0x12e0 + (a) * 0x400)
+
+/* Port MAC 0/1 Transmit Late Collision Counter */
+#define NETC_PM_TLCOL(a) (0x12e8 + (a) * 0x400)
+
+/* Port MAC 0/1 Transmit Excessive Collisions Counter */
+#define NETC_PM_TECOL(a) (0x12f0 + (a) * 0x400)
+
#define NETC_PEMDIOCR 0x1c00
#define NETC_EMDIO_BASE NETC_PEMDIOCR
diff --git a/include/linux/fsl/netc_global.h b/include/linux/fsl/netc_global.h
index fdecca8c90f0..5b8ff528d369 100644
--- a/include/linux/fsl/netc_global.h
+++ b/include/linux/fsl/netc_global.h
@@ -5,6 +5,7 @@
#define __NETC_GLOBAL_H
#include <linux/io.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
static inline u32 netc_read(void __iomem *reg)
{
@@ -16,4 +17,9 @@ static inline void netc_write(void __iomem *reg, u32 val)
iowrite32(val, reg);
}
+static inline u64 netc_read64(void __iomem *reg)
+{
+ return ioread64(reg);
+}
+
#endif
--
2.34.1
^ permalink raw reply related [flat|nested] 16+ messages in thread