[PATCH net-next v4 09/10] selftests: drivers: hw: update ethtool_rmon to work with a single local interface

[Ioana Ciornei <ioana.ciornei@nxp.com>]

This patch finalizes the transition to work with a single local
interface for the ethtool_rmon.sh test. Each 'ip link' and 'ethtool'
command used by the test is annotated with the necessary run_on in
order to be executed on the necessary target system, be it local, in
another network namespace or through ssh.

Since we need NETIF up and running also for control traffic, we now
expect that the interfaces are up and running and do not touch bring
them up or down at the end of the test. This is also documented in the
drivers/net/README.rst.

The ethtool_rmon.sh script can still be used in the older fashion by
passing two interfaces as command line arguments, the only restriction
is that those interfaces need to be already up.

 $ DRIVER_TEST_CONFORMANT=no ./ethtool_rmon.sh eth0 eth1

As part of the kselftest infrastructure, this test can be run in the
following manner:

 $ make -C tools/testing/selftests/ TARGETS="drivers/net drivers/net/hw" \
 install INSTALL_PATH=/tmp/ksft-net-drv
 $ cd /tmp/ksft-net-drv/
 $ cat > ./drivers/net/net.config <<EOF
 NETIF=endpmac17
 LOCAL_V4=17.0.0.1
 REMOTE_V4=17.0.0.2
 REMOTE_TYPE=ssh
 REMOTE_ARGS=root@192.168.5.200
 EOF

 $ ./run_kselftest.sh -t drivers/net/hw:ethtool_rmon.sh
 TAP version 13
 1..1
 # timeout set to 0
 # selftests: drivers/net/hw: ethtool_rmon.sh
 # TAP version 13
 # 1..14
 # ok 1 ethtool_rmon.rx-pkts64to64
 # ok 2 ethtool_rmon.rx-pkts65to127
 # ok 3 ethtool_rmon.rx-pkts128to255
 # ok 4 ethtool_rmon.rx-pkts256to511
 # ok 5 ethtool_rmon.rx-pkts512to1023
 # ok 6 ethtool_rmon.rx-pkts1024to1518
 # ok 7 ethtool_rmon.rx-pkts1519to10240
 # ok 8 ethtool_rmon.tx-pkts64to64
 # ok 9 ethtool_rmon.tx-pkts65to127
 # ok 10 ethtool_rmon.tx-pkts128to255
 # ok 11 ethtool_rmon.tx-pkts256to511
 # ok 12 ethtool_rmon.tx-pkts512to1023
 # ok 13 ethtool_rmon.tx-pkts1024to1518
 # ok 14 ethtool_rmon.tx-pkts1519to10240
 # # Totals: pass:14 fail:0 xfail:0 xpass:0 skip:0 error:0
 ok 1 selftests: drivers/net/hw: ethtool_rmon.sh

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
---
Changes in v4:
- set DRIVER_TEST_CONFORMANT to yes
- update the commit message to reflect the current output
- split some more lines to 80 chars
Changes in v3:
- none
Changes in v2:
- patch is new

 .../selftests/drivers/net/hw/ethtool_rmon.sh  | 30 +++++++++++--------
 1 file changed, 17 insertions(+), 13 deletions(-)

diff --git a/tools/testing/selftests/drivers/net/hw/ethtool_rmon.sh b/tools/testing/selftests/drivers/net/hw/ethtool_rmon.sh
index ed81bdc33536..2ec19edddfaa 100755
--- a/tools/testing/selftests/drivers/net/hw/ethtool_rmon.sh
+++ b/tools/testing/selftests/drivers/net/hw/ethtool_rmon.sh
@@ -8,6 +8,7 @@ ALL_TESTS="
 	rmon_tx_histogram
 "
 
+: "${DRIVER_TEST_CONFORMANT:=yes}"
 NUM_NETIFS=2
 lib_dir=$(dirname "$0")
 source "$lib_dir"/../../../net/forwarding/lib.sh
@@ -27,9 +28,11 @@ ensure_mtu()
 	local required=$((len - ETH_HLEN - ETH_FCS_LEN))
 	local current
 
-	current=$(ip -j link show dev "$iface" | jq -r '.[0].mtu')
+	current=$(run_on "$iface" \
+		ip -j link show dev "$iface" | jq -r '.[0].mtu')
 	if [ "$current" -lt "$required" ]; then
-		ip link set dev "$iface" mtu "$required" || return 1
+		run_on "$iface" ip link set dev "$iface" mtu "$required" \
+			|| return 1
 	fi
 }
 
@@ -52,15 +55,17 @@ bucket_test()
 	len=$((len - ETH_FCS_LEN))
 	len=$((len > 0 ? len : 0))
 
-	before=$(ethtool --json -S "$iface" --groups rmon | \
+	before=$(run_on "$iface" ethtool --json -S "$iface" --groups rmon | \
 		jq -r ".[0].rmon[\"${set}-pktsNtoM\"][$bucket].val")
 
 	# Send 10k one way and 20k in the other, to detect counters
 	# mapped to the wrong direction
-	"$MZ" "$neigh" -q -c "$num_rx" -p "$len" -a own -b bcast -d 10us
-	"$MZ" "$iface" -q -c "$num_tx" -p "$len" -a own -b bcast -d 10us
+	run_on "$neigh" \
+		"$MZ" "$neigh" -q -c "$num_rx" -p "$len" -a own -b bcast -d 10us
+	run_on "$iface" \
+		"$MZ" "$iface" -q -c "$num_tx" -p "$len" -a own -b bcast -d 10us
 
-	after=$(ethtool --json -S "$iface" --groups rmon | \
+	after=$(run_on "$iface" ethtool --json -S "$iface" --groups rmon | \
 		jq -r ".[0].rmon[\"${set}-pktsNtoM\"][$bucket].val")
 
 	delta=$((after - before))
@@ -95,7 +100,7 @@ rmon_histogram()
 		fi
 		ktap_test_pass "$TEST_NAME.$step"
 		nbuckets=$((nbuckets + 1))
-	done < <(ethtool --json -S "$iface" --groups rmon | \
+	done < <(run_on "$iface" ethtool --json -S "$iface" --groups rmon | \
 		jq -r ".[0].rmon[\"${set}-pktsNtoM\"][]|[.low, .high]|@tsv" 2>/dev/null)
 
 	if [ "$nbuckets" -eq 0 ]; then
@@ -120,9 +125,8 @@ setup_prepare()
 	h2=${NETIFS[p2]}
 
 	for iface in "$h1" "$h2"; do
-		netif_mtu["$iface"]=$(ip -j link show dev "$iface" | \
-			jq -r '.[0].mtu')
-		ip link set dev "$iface" up
+		netif_mtu["$iface"]=$(run_on "$iface" \
+			ip -j link show dev "$iface" | jq -r '.[0].mtu')
 	done
 }
 
@@ -130,10 +134,10 @@ cleanup()
 {
 	pre_cleanup
 
+	# Do not bring down the interfaces, just configure the initial MTU
 	for iface in "$h2" "$h1"; do
-		ip link set dev "$iface" \
-			mtu "${netif_mtu[$iface]}" \
-			down
+		run_on "$iface" ip link set dev "$iface" \
+			mtu "${netif_mtu[$iface]}"
 	done
 }
 
-- 
2.25.1