[PATCH 2/3] nfc: pn533: refactor endpoint lookup

[Johan Hovold <johan@kernel.org>]

Use the common USB helpers for looking up bulk and interrupt endpoints
(and determining endpoint numbers) instead of open coding.

Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/nfc/pn533/usb.c | 34 +++++++++++-----------------------
 1 file changed, 11 insertions(+), 23 deletions(-)

diff --git a/drivers/nfc/pn533/usb.c b/drivers/nfc/pn533/usb.c
index 0ff2f0d7caf4..efb07f944fce 100644
--- a/drivers/nfc/pn533/usb.c
+++ b/drivers/nfc/pn533/usb.c
@@ -476,14 +476,9 @@ static const struct pn533_phy_ops usb_phy_ops = {
 static int pn533_usb_probe(struct usb_interface *interface,
 			const struct usb_device_id *id)
 {
+	struct usb_endpoint_descriptor *ep_in, *ep_out;
 	struct pn533 *priv;
 	struct pn533_usb_phy *phy;
-	struct usb_host_interface *iface_desc;
-	struct usb_endpoint_descriptor *endpoint;
-	int in_endpoint = 0;
-	int out_endpoint = 0;
-	int rc = -ENOMEM;
-	int i;
 	u32 protocols;
 	enum pn533_protocol_type protocol_type = PN533_PROTO_REQ_ACK_RESP;
 	struct pn533_frame_ops *fops = NULL;
@@ -491,6 +486,7 @@ static int pn533_usb_probe(struct usb_interface *interface,
 	int in_buf_len = PN533_EXT_FRAME_HEADER_LEN +
 			 PN533_STD_FRAME_MAX_PAYLOAD_LEN +
 			 PN533_STD_FRAME_TAIL_LEN;
+	int rc;
 
 	phy = devm_kzalloc(&interface->dev, sizeof(*phy), GFP_KERNEL);
 	if (!phy)
@@ -503,21 +499,11 @@ static int pn533_usb_probe(struct usb_interface *interface,
 	phy->udev = interface_to_usbdev(interface);
 	phy->interface = interface;
 
-	iface_desc = interface->cur_altsetting;
-	for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
-		endpoint = &iface_desc->endpoint[i].desc;
-
-		if (!in_endpoint && usb_endpoint_is_bulk_in(endpoint))
-			in_endpoint = endpoint->bEndpointAddress;
-
-		if (!out_endpoint && usb_endpoint_is_bulk_out(endpoint))
-			out_endpoint = endpoint->bEndpointAddress;
-	}
-
-	if (!in_endpoint || !out_endpoint) {
+	rc = usb_find_common_endpoints(interface->cur_altsetting, &ep_in,
+				       &ep_out, NULL, NULL);
+	if (rc) {
 		nfc_err(&interface->dev,
 			"Could not find bulk-in or bulk-out endpoint\n");
-		rc = -ENODEV;
 		goto error;
 	}
 
@@ -525,18 +511,20 @@ static int pn533_usb_probe(struct usb_interface *interface,
 	phy->out_urb = usb_alloc_urb(0, GFP_KERNEL);
 	phy->ack_urb = usb_alloc_urb(0, GFP_KERNEL);
 
-	if (!phy->in_urb || !phy->out_urb || !phy->ack_urb)
+	if (!phy->in_urb || !phy->out_urb || !phy->ack_urb) {
+		rc = -ENOMEM;
 		goto error;
+	}
 
 	usb_fill_bulk_urb(phy->in_urb, phy->udev,
-			  usb_rcvbulkpipe(phy->udev, in_endpoint),
+			  usb_rcvbulkpipe(phy->udev, usb_endpoint_num(ep_in)),
 			  in_buf, in_buf_len, NULL, phy);
 
 	usb_fill_bulk_urb(phy->out_urb, phy->udev,
-			  usb_sndbulkpipe(phy->udev, out_endpoint),
+			  usb_sndbulkpipe(phy->udev, usb_endpoint_num(ep_out)),
 			  NULL, 0, pn533_out_complete, phy);
 	usb_fill_bulk_urb(phy->ack_urb, phy->udev,
-			  usb_sndbulkpipe(phy->udev, out_endpoint),
+			  usb_sndbulkpipe(phy->udev, usb_endpoint_num(ep_out)),
 			  NULL, 0, pn533_ack_complete, phy);
 
 	switch (id->driver_info) {
-- 
2.52.0