[PATCH net 3/3] net/mlx5: Fix switchdev mode rollback in case of failure

[Tariq Toukan <tariqt@nvidia.com>]

From: Saeed Mahameed <saeedm@nvidia.com>

If for some internal reason switchdev mode fails, we rollback to legacy
mode, before this patch, rollback will unregister the uplink netdev and
leave it unregistered causing the below kernel bug.

To fix this, we need to avoid netdev unregister by setting the proper
rollback flag 'MLX5_PRIV_FLAGS_SWITCH_LEGACY' to indicate legacy mode.

devlink (431) used greatest stack depth: 11048 bytes left
mlx5_core 0000:00:03.0: E-Switch: Disable: mode(LEGACY), nvfs(0), \
	necvfs(0), active vports(0)
mlx5_core 0000:00:03.0: E-Switch: Supported tc chains and prios offload
mlx5_core 0000:00:03.0: Loading uplink representor for vport 65535
mlx5_core 0000:00:03.0: mlx5_cmd_out_err:816:(pid 456): \
	QUERY_HCA_CAP(0x100) op_mod(0x0) failed, \
	status bad parameter(0x3), syndrome (0x3a3846), err(-22)
mlx5_core 0000:00:03.0 enp0s3np0 (unregistered): Unloading uplink \
	representor for vport 65535
 ------------[ cut here ]------------
kernel BUG at net/core/dev.c:12070!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 2 UID: 0 PID: 456 Comm: devlink Not tainted 6.16.0-rc3+ \
	#9 PREEMPT(voluntary)
RIP: 0010:unregister_netdevice_many_notify+0x123/0xae0
...
Call Trace:
[   90.923094]  unregister_netdevice_queue+0xad/0xf0
[   90.923323]  unregister_netdev+0x1c/0x40
[   90.923522]  mlx5e_vport_rep_unload+0x61/0xc6
[   90.923736]  esw_offloads_enable+0x8e6/0x920
[   90.923947]  mlx5_eswitch_enable_locked+0x349/0x430
[   90.924182]  ? is_mp_supported+0x57/0xb0
[   90.924376]  mlx5_devlink_eswitch_mode_set+0x167/0x350
[   90.924628]  devlink_nl_eswitch_set_doit+0x6f/0xf0
[   90.924862]  genl_family_rcv_msg_doit+0xe8/0x140
[   90.925088]  genl_rcv_msg+0x18b/0x290
[   90.925269]  ? __pfx_devlink_nl_pre_doit+0x10/0x10
[   90.925506]  ? __pfx_devlink_nl_eswitch_set_doit+0x10/0x10
[   90.925766]  ? __pfx_devlink_nl_post_doit+0x10/0x10
[   90.926001]  ? __pfx_genl_rcv_msg+0x10/0x10
[   90.926206]  netlink_rcv_skb+0x52/0x100
[   90.926393]  genl_rcv+0x28/0x40
[   90.926557]  netlink_unicast+0x27d/0x3d0
[   90.926749]  netlink_sendmsg+0x1f7/0x430
[   90.926942]  __sys_sendto+0x213/0x220
[   90.927127]  ? __sys_recvmsg+0x6a/0xd0
[   90.927312]  __x64_sys_sendto+0x24/0x30
[   90.927504]  do_syscall_64+0x50/0x1c0
[   90.927687]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
[   90.927929] RIP: 0033:0x7f7d0363e047

Fixes: 2a4f56fbcc47 ("net/mlx5e: Keep netdev when leave switchdev for devlink set legacy only")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
index 7a9ee36b8dca..01f6aecc4fcc 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -3761,6 +3761,8 @@ int esw_offloads_enable(struct mlx5_eswitch *esw)
 	return 0;
 
 err_vports:
+	/* rollback to legacy, indicates don't unregister the uplink netdev */
+	esw->dev->priv.flags |= MLX5_PRIV_FLAGS_SWITCH_LEGACY;
 	mlx5_esw_offloads_rep_unload(esw, MLX5_VPORT_UPLINK);
 err_uplink:
 	esw_offloads_steering_cleanup(esw);
-- 
2.44.0