[net-next PATCH 02/10] net: dsa: realtek: rtl8365mb: set STP state to disabled early

[Luiz Angelo Daros de Luca <luizluca@gmail.com>]

From: Alvin Šipraga <alsi@bang-olufsen.dk>

Since we are going around and manipulating a number of port settings
during setup, it's safer to assume that the port is disabled to begin
with. This is purely defensive.

Co-developed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
---
 drivers/net/dsa/realtek/rtl8365mb.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/dsa/realtek/rtl8365mb.c b/drivers/net/dsa/realtek/rtl8365mb.c
index 31fa94dac627..530ff5503543 100644
--- a/drivers/net/dsa/realtek/rtl8365mb.c
+++ b/drivers/net/dsa/realtek/rtl8365mb.c
@@ -1989,6 +1989,12 @@ static int rtl8365mb_setup(struct dsa_switch *ds)
 		if (dsa_is_unused_port(ds, i))
 			continue;
 
+		/* Set the initial STP state of all ports to DISABLED, otherwise
+		 * ports will still forward frames to the CPU despite being
+		 * administratively down by default.
+		 */
+		rtl8365mb_port_stp_state_set(ds, i, BR_STATE_DISABLED);
+
 		/* Forward only to the CPU */
 		ret = rtl8365mb_port_set_isolation(priv, i, cpu->mask);
 		if (ret)
@@ -1999,12 +2005,6 @@ static int rtl8365mb_setup(struct dsa_switch *ds)
 		if (ret)
 			goto out_teardown_irq;
 
-		/* Set the initial STP state of all ports to DISABLED, otherwise
-		 * ports will still forward frames to the CPU despite being
-		 * administratively down by default.
-		 */
-		rtl8365mb_port_stp_state_set(ds, i, BR_STATE_DISABLED);
-
 		/* Set up per-port private data */
 		p->priv = priv;
 		p->index = i;

-- 
2.53.0