[PATCH net-next v9 4/4] net: stmmac: Add BCM8958x driver to build system

["Jitendra Vegiraju" <jitendra.vegiraju@broadcom.com>]

From: Jitendra Vegiraju <jitendra.vegiraju@broadcom.com>

Add PCI driver for BCM8958x to the linux build system and
update MAINTAINERS file.

Signed-off-by: Jitendra Vegiraju <jitendra.vegiraju@broadcom.com>
---
 MAINTAINERS                                  |  8 ++++++++
 drivers/net/ethernet/stmicro/stmmac/Kconfig  | 11 +++++++++++
 drivers/net/ethernet/stmicro/stmmac/Makefile |  1 +
 3 files changed, 20 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 7a2ffd9d37d5..0637b8a563ae 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5120,6 +5120,14 @@ N:	brcmstb
 N:	bcm7038
 N:	bcm7120
 
+BROADCOM BCM8958X ETHERNET DRIVER
+M:	Jitendra Vegiraju <jitendra.vegiraju@broadcom.com>
+R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/ethernet/stmicro/stmmac/dw25gmac.*
+F:	drivers/net/ethernet/stmicro/stmmac/dwmac-brcm.c
+
 BROADCOM BCMBCA ARM ARCHITECTURE
 M:	William Zhang <william.zhang@broadcom.com>
 M:	Anand Gore <anand.gore@broadcom.com>
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index c2cb530fd0a2..f6f8fa256bf5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -398,6 +398,17 @@ config DWMAC_LOONGSON
 	  This selects the LOONGSON PCI bus support for the stmmac driver,
 	  Support for ethernet controller on Loongson-2K1000 SoC and LS7A1000 bridge.
 
+config DWMAC_BRCM
+	tristate "Broadcom XGMAC support"
+	depends on STMMAC_ETH && PCI
+	depends on COMMON_CLK
+	select STMMAC_LIBPCI
+	help
+	  Support for ethernet controllers on Broadcom BCM8958x SoCs.
+	  This selects Broadcom XGMAC specific PCI bus support for the
+	  stmmac driver. This driver provides the glue layer on top of the
+	  stmmac driver required for the Broadcom BCM8958x SoC devices.
+
 config DWMAC_MOTORCOMM
 	tristate "Motorcomm PCI DWMAC support"
 	depends on PCI
diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
index dc55aec915a2..a1e39f65cd42 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -51,4 +51,5 @@ obj-$(CONFIG_STMMAC_PCI)	+= stmmac-pci.o
 obj-$(CONFIG_DWMAC_INTEL)	+= dwmac-intel.o
 obj-$(CONFIG_DWMAC_LOONGSON)	+= dwmac-loongson.o
 obj-$(CONFIG_DWMAC_MOTORCOMM)	+= dwmac-motorcomm.o
+obj-$(CONFIG_DWMAC_BRCM)       += dwmac-brcm.o
 stmmac-pci-objs:= stmmac_pci.o
-- 
2.34.1