public inbox for netdev@vger.kernel.org
 help / color / mirror / Atom feed
From: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
To: intel-wired-lan@lists.osuosl.org, anthony.l.nguyen@intel.com,
	aleksandr.loktionov@intel.com
Cc: netdev@vger.kernel.org, Jan Glaza <jan.glaza@intel.com>
Subject: [PATCH iwl-net 6/10] ice: check PHY autoneg capability before rejecting ethtool autoneg setting
Date: Fri,  3 Apr 2026 07:40:24 +0200	[thread overview]
Message-ID: <20260403054029.3789616-7-aleksandr.loktionov@intel.com> (raw)
In-Reply-To: <20260403054029.3789616-1-aleksandr.loktionov@intel.com>

ice_set_link_ksettings() rejects autoneg requests by comparing
user settings against safe_ks which is populated by
ice_phy_type_to_ethtool(). The Autoneg bit in safe_ks is set
only if the current PHY configuration reports it supported,
but this misses PHYs that support autoneg and have it available
through PHY capabilities. Pull the autoneg flag from the actual
PHY capabilities (already fetched earlier in the function) to
ensure the user can toggle autoneg on any capable PHY.

Fixes: 5cd349c349d6 ("ice: report supported and advertised autoneg using PHY capabilities")
Cc: stable@vger.kernel.org
Signed-off-by: Jan Glaza <jan.glaza@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_ethtool.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c
index 49b9376..44483bc 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
@@ -2654,6 +2654,14 @@ ice_set_link_ksettings(struct net_device *netdev,
 	/* Get link modes supported by hardware.*/
 	ice_phy_type_to_ethtool(netdev, &safe_ks);
 
+	/* Pull the value of autoneg from phy caps to ensure we allow
+	 * toggling it on all PHYs that support it.
+	 */
+	if (ice_is_phy_caps_an_enabled(phy_caps)) {
+		ethtool_link_ksettings_add_link_mode(&safe_ks, supported, Autoneg);
+		set_bit(ETHTOOL_LINK_MODE_FEC_NONE_BIT, safe_ks.link_modes.supported);
+	}
+
 	/* and check against modes requested by user.
 	 * Return an error if unsupported mode was set.
 	 */
-- 
2.52.0


  parent reply	other threads:[~2026-04-03  5:40 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-04-03  5:40 [PATCH iwl-net 0/10] ice: bug fixes -- no link, tc-flower, VF rate Aleksandr Loktionov
2026-04-03  5:40 ` [PATCH iwl-net 1/10] ice: fix mirroring to VSI list Aleksandr Loktionov
2026-04-03  5:40 ` [PATCH iwl-net 2/10] ice: update FW on all DCB changes Aleksandr Loktionov
2026-04-03  5:40 ` [PATCH iwl-net 3/10] ice: disallow service task to run while driver is unloading Aleksandr Loktionov
2026-04-03  5:40 ` [PATCH iwl-net 4/10] ice: error out on CONNECTED state for input pin Aleksandr Loktionov
2026-04-03  5:40 ` [PATCH iwl-net 5/10] ice: add 10000baseCR_Full to advertised link speed map Aleksandr Loktionov
2026-04-03  5:40 ` Aleksandr Loktionov [this message]
2026-04-10 18:58   ` [PATCH iwl-net 6/10] ice: check PHY autoneg capability before rejecting ethtool autoneg setting Tony Nguyen
2026-04-03  5:40 ` [PATCH iwl-net 7/10] ice: fix missing 50G single-lane ethtool link speed mappings Aleksandr Loktionov
2026-04-03  5:40 ` [PATCH iwl-net 8/10] ice: set ETS TLV willing bit in default MIB sent to firmware Aleksandr Loktionov
2026-04-06 20:22   ` Ertman, David M
2026-04-03  5:40 ` [PATCH iwl-net 9/10] ice: select inner TCP dummy packet when matching on ip_proto TCP without explicit L4 field Aleksandr Loktionov
2026-04-03  5:40 ` [PATCH iwl-net 10/10] ice: allow setting min_tx_rate to 0 to resolve VF bandwidth oversubscription Aleksandr Loktionov
2026-04-10 18:58   ` Tony Nguyen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260403054029.3789616-7-aleksandr.loktionov@intel.com \
    --to=aleksandr.loktionov@intel.com \
    --cc=anthony.l.nguyen@intel.com \
    --cc=intel-wired-lan@lists.osuosl.org \
    --cc=jan.glaza@intel.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox