From: Marc Harvey <marcharvey@google.com>
To: Jiri Pirko <jiri@resnulli.us>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>, Shuah Khan <shuah@kernel.org>,
Simon Horman <horms@kernel.org>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-kselftest@vger.kernel.org,
Marc Harvey <marcharvey@google.com>
Subject: [PATCH net-next v5 00/10] Decouple receive and transmit enablement in team driver
Date: Mon, 06 Apr 2026 03:03:36 +0000 [thread overview]
Message-ID: <20260406-teaming-driver-internal-v5-0-e8a3f348a1c5@google.com> (raw)
Allow independent control over receive and transmit enablement states
for aggregated ports in the team driver.
The motivation is that IEE 802.3ad LACP "independent control" can't
be implemented for the team driver currently. This was added to the
bonding driver in commit 240fd405528b ("bonding: Add independent
control state machine").
This series also has a few patches that add tests to show that the old
coupled enablement still works and that the new decoupled enablement
works as intended (4, 5, and 10).
There are three patches with small fixes as well, with the goal of
making the final decoupling patch clearer (1, 2, and 3).
Signed-off-by: Marc Harvey <marcharvey@google.com>
---
Changes in v5:
- Change teamd activebackup selftest in patch 5 to try graceful teamd
teardown before using sigkill.
- Make the teamd activebackup selftest in patch 5 delete leftover
teamd files during teardown.
- Reorder function calls in team_port_enable function in patch 7,
since the enablement behavior shouldn't change.
- Make selftests use tcpdump instead of checking rx counters.
- Fix minor typos in patch 10.
- Link to v4: https://lore.kernel.org/r/20260403-teaming-driver-internal-v4-0-d3032f33ca25@google.com
Changes in v4:
- Split the large v3 patch "net: team: Decouple rx and tx enablement
in the team driver" into 4 smaller patches.
- Link to v3: https://lore.kernel.org/r/20260402-teaming-driver-internal-v3-0-e8cfdec3b5c2@google.com
Changes in v3:
- Patch 5: In test cleanup, kill teamd to fix timeout.
- Link to v2: https://lore.kernel.org/r/20260401-teaming-driver-internal-v2-0-f80c1291727b@google.com
Changes in v2:
- Patch 4 and 5: Fix shellcheck errors and warnings, use iperf3
instead of netcat+pv, fix dependency checking.
- Patch 7: Fix shellcheck errors and warnings, fix dependency
checking.
- Link to v1: https://lore.kernel.org/all/20260331053353.2504254-1-marcharvey@google.com/
---
Marc Harvey (10):
net: team: Annotate reads and writes for mixed lock accessed values
net: team: Remove unused team_mode_op, port_enabled
net: team: Rename port_disabled team mode op to port_tx_disabled
selftests: net: Add tests for failover of team-aggregated ports
selftests: net: Add test for enablement of ports with teamd
net: team: Rename enablement functions and struct members to tx
net: team: Track rx enablement separately from tx enablement
net: team: Add new rx_enabled team port option
net: team: Add new tx_enabled team port option
selftests: net: Add tests for team driver decoupled tx and rx control
drivers/net/team/team_core.c | 237 +++++++++++++++----
drivers/net/team/team_mode_loadbalance.c | 8 +-
drivers/net/team/team_mode_random.c | 4 +-
drivers/net/team/team_mode_roundrobin.c | 2 +-
include/linux/if_team.h | 63 ++++--
tools/testing/selftests/drivers/net/team/Makefile | 4 +
tools/testing/selftests/drivers/net/team/config | 4 +
.../drivers/net/team/decoupled_enablement.sh | 249 ++++++++++++++++++++
.../testing/selftests/drivers/net/team/options.sh | 99 +++++++-
.../testing/selftests/drivers/net/team/team_lib.sh | 172 ++++++++++++++
.../drivers/net/team/teamd_activebackup.sh | 251 +++++++++++++++++++++
.../drivers/net/team/transmit_failover.sh | 158 +++++++++++++
tools/testing/selftests/net/forwarding/lib.sh | 7 +-
tools/testing/selftests/net/lib.sh | 13 ++
14 files changed, 1199 insertions(+), 72 deletions(-)
---
base-commit: 3741f8fa004bf598cd5032b0ff240984332d6f05
change-id: 20260401-teaming-driver-internal-83f2f0074d68
Best regards,
--
Marc Harvey <marcharvey@google.com>
next reply other threads:[~2026-04-06 3:04 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-06 3:03 Marc Harvey [this message]
2026-04-06 3:03 ` [PATCH net-next v5 01/10] net: team: Annotate reads and writes for mixed lock accessed values Marc Harvey
2026-04-06 3:03 ` [PATCH net-next v5 02/10] net: team: Remove unused team_mode_op, port_enabled Marc Harvey
2026-04-06 3:03 ` [PATCH net-next v5 03/10] net: team: Rename port_disabled team mode op to port_tx_disabled Marc Harvey
2026-04-06 3:03 ` [PATCH net-next v5 04/10] selftests: net: Add tests for failover of team-aggregated ports Marc Harvey
2026-04-06 3:03 ` [PATCH net-next v5 05/10] selftests: net: Add test for enablement of ports with teamd Marc Harvey
2026-04-06 3:03 ` [PATCH net-next v5 06/10] net: team: Rename enablement functions and struct members to tx Marc Harvey
2026-04-06 3:03 ` [PATCH net-next v5 07/10] net: team: Track rx enablement separately from tx enablement Marc Harvey
2026-04-06 3:03 ` [PATCH net-next v5 08/10] net: team: Add new rx_enabled team port option Marc Harvey
2026-04-06 3:03 ` [PATCH net-next v5 09/10] net: team: Add new tx_enabled " Marc Harvey
2026-04-06 3:03 ` [PATCH net-next v5 10/10] selftests: net: Add tests for team driver decoupled tx and rx control Marc Harvey
2026-04-06 14:44 ` [PATCH net-next v5 00/10] Decouple receive and transmit enablement in team driver Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260406-teaming-driver-internal-v5-0-e8a3f348a1c5@google.com \
--to=marcharvey@google.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=jiri@resnulli.us \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=shuah@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox