[PATCH net] net: airoha: Fix FE_PSE_BUF_SET configuration if PPE2 is available

[Lorenzo Bianconi <lorenzo@kernel.org>]

airoha_fe_set routine is used to set specified bits to 1 in the selected
register. In the FE_PSE_BUF_SET case this can due to a overestimation of
the required buffers for I/O queues since we can miss to set some bits
of PSE_ALLRSV_MASK subfield to 0. Fix the issue relying on airoha_fe_rmw
routine instead.

Fixes: 8e38e08f2c560 ("net: airoha: fix PSE memory configuration in airoha_fe_pse_ports_init()")
Tested-by: Xuegang Lu <xuegang.lu@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
 drivers/net/ethernet/airoha/airoha_eth.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/airoha/airoha_eth.c b/drivers/net/ethernet/airoha/airoha_eth.c
index 91cb63a32d99..c365d693cf40 100644
--- a/drivers/net/ethernet/airoha/airoha_eth.c
+++ b/drivers/net/ethernet/airoha/airoha_eth.c
@@ -293,16 +293,18 @@ static void airoha_fe_pse_ports_init(struct airoha_eth *eth)
 		[FE_PSE_PORT_GDM4] = 2,
 		[FE_PSE_PORT_CDM5] = 2,
 	};
-	u32 all_rsv;
 	int q;
 
-	all_rsv = airoha_fe_get_pse_all_rsv(eth);
 	if (airoha_ppe_is_enabled(eth, 1)) {
+		u32 all_rsv;
+
 		/* hw misses PPE2 oq rsv */
+		all_rsv = airoha_fe_get_pse_all_rsv(eth);
 		all_rsv += PSE_RSV_PAGES *
 			   pse_port_num_queues[FE_PSE_PORT_PPE2];
+		airoha_fe_rmw(eth, REG_FE_PSE_BUF_SET, PSE_ALLRSV_MASK,
+			      FIELD_PREP(PSE_ALLRSV_MASK, all_rsv));
 	}
-	airoha_fe_set(eth, REG_FE_PSE_BUF_SET, all_rsv);
 
 	/* CMD1 */
 	for (q = 0; q < pse_port_num_queues[FE_PSE_PORT_CDM1]; q++)

---
base-commit: f821664dde29302e8450aa0597bf1e4c7c5b0a22
change-id: 20260408-airoha-reg_fe_pse_buf_set-39a75edb52ca

Best regards,
-- 
Lorenzo Bianconi <lorenzo@kernel.org>