* [GIT PULL] bluetooth-next 2026-04-10
@ 2026-04-10 17:22 Luiz Augusto von Dentz
0 siblings, 0 replies; only message in thread
From: Luiz Augusto von Dentz @ 2026-04-10 17:22 UTC (permalink / raw)
To: davem, kuba; +Cc: linux-bluetooth, netdev
The following changes since commit 42f9b4c6ef19e71d2c7d9bfd3c5037d4fe434ad7:
tools: ynl: tests: fix leading space on Makefile target (2026-04-09 20:41:40 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git tags/for-net-next-2026-04-10
for you to fetch changes up to 02751aa9eb61cba881dad5a1e2663389b76ea8f2:
Bluetooth: hci_qca: Fix missing wakeup during SSR memdump handling (2026-04-10 10:38:37 -0400)
----------------------------------------------------------------
bluetooth-next pull request for net-next:
core:
- hci_core: Rate limit the logging of invalid ISO handle
- hci_sync: make hci_cmd_sync_run_once return -EEXIST if exists
- hci_event: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER
- hci_event: fix potential UAF in SSP passkey handlers
- HCI: Avoid a couple -Wflex-array-member-not-at-end warnings
- L2CAP: CoC: Disconnect if received packet size exceeds MPS
- L2CAP: Add missing chan lock in l2cap_ecred_reconf_rsp
- L2CAP: Fix printing wrong information if SDU length exceeds MTU
- SCO: check for codecs->num_codecs == 1 before assigning to sco_pi(sk)->codec
drivers:
- btusb: MT7922: Add VID/PID 0489/e174
- btusb: Add Lite-On 04ca:3807 for MediaTek MT7921
- btusb: Add MT7927 IDs ASUS ROG Crosshair X870E Hero, Lenovo Legion Pro 7
16ARX9, Gigabyte Z790 AORUS MASTER X, MSI X870E Ace Max, TP-Link
Archer TBE550E, ASUS X870E / ProArt X870E-Creator.
- btusb: Add MT7902 IDs 13d3/3579, 13d3/3580, 13d3/3594, 13d3/3596, 0e8d/1ede
- btusb: MediaTek MT7922: Add VID 0489 & PID e11d
- btintel: Add support for Scorpious Peak2 support
- btintel: Add support for Scorpious Peak2F support
- btintel_pcie: Add device id of Scorpius Peak2, Nova Lake-PCD-H
- btintel_pcie: Add device id of Scorpious2, Nova Lake-PCD-S
- btmtk: Add reset mechanism if downloading firmware failed
- btmtk: Add MT6639 (MT7927) Bluetooth support
- btmtk: fix ISO interface setup for single alt setting
- btmtk: add MT7902 SDIO support
- Bluetooth: btmtk: add MT7902 MCU support
- btbcm: Add entry for BCM4343A2 UART Bluetooth
- qca: enable pwrseq support for wcn39xx devices
- hci_qca: Fix BT not getting powered-off on rmmod
- hci_qca: disable power control for WCN7850 when bt_en is not defined
- hci_qca: Fix missing wakeup during SSR memdump handling
- hci_ldisc: Clear HCI_UART_PROTO_INIT on error
- mmc: sdio: add MediaTek MT7902 SDIO device ID
- hci_ll: Enable BROKEN_ENHANCED_SETUP_SYNC_CONN for WL183x
----------------------------------------------------------------
Arnd Bergmann (1):
Bluetooth: btmtk: hide unused btmtk_mt6639_devs[] array
Chris Lu (4):
Bluetooth: btusb: MT7922: Add VID/PID 0489/e174
Bluetooth: btmtk: improve mt79xx firmware setup retry flow
Bluetooth: btmtk: add status check in mt79xx firmware setup
Bluetooth: btmtk: Add reset mechanism if downloading firmware failed
Christian Eggers (1):
Bluetooth: L2CAP: CoC: Disconnect if received packet size exceeds MPS
Dmitry Baryshkov (1):
Bluetooth: qca: enable pwrseq support for WCN39xx devices
Dongyang Jin (1):
Bluetooth: btbcm: remove done label in btbcm_patchram
Dudu Lu (1):
Bluetooth: l2cap: Add missing chan lock in l2cap_ecred_reconf_rsp
Dylan Eray (1):
Bluetooth: btusb: Add Lite-On 04ca:3807 for MediaTek MT7921
Gustavo A. R. Silva (1):
Bluetooth: hci.h: Avoid a couple -Wflex-array-member-not-at-end warnings
Hans de Goede (2):
Bluetooth: hci_qca: Fix confusing shutdown() and power_off() naming
Bluetooth: hci_qca: Fix BT not getting powered-off on rmmod
Javier Tia (8):
Bluetooth: btmtk: Add MT6639 (MT7927) Bluetooth support
Bluetooth: btmtk: fix ISO interface setup for single alt setting
Bluetooth: btusb: Add MT7927 ID for ASUS ROG Crosshair X870E Hero
Bluetooth: btusb: Add MT7927 ID for Lenovo Legion Pro 7 16ARX9
Bluetooth: btusb: Add MT7927 ID for Gigabyte Z790 AORUS MASTER X
Bluetooth: btusb: Add MT7927 ID for MSI X870E Ace Max
Bluetooth: btusb: Add MT7927 ID for TP-Link Archer TBE550E
Bluetooth: btusb: Add MT7927 ID for ASUS X870E / ProArt X870E-Creator
Johan Hovold (2):
Bluetooth: btusb: refactor endpoint lookup
Bluetooth: btmtk: refactor endpoint lookup
Jonathan Rissanen (1):
Bluetooth: hci_ldisc: Clear HCI_UART_PROTO_INIT on error
Kamiyama Chiaki (1):
Bluetooth: btusb: MediaTek MT7922: Add VID 0489 & PID e11d
Kiran K (10):
Bluetooth: btintel: Add support for hybrid signature for ScP2 onwards
Bluetooth: btintel: Replace CNVi id with hardware variant
Bluetooth: btintel: Add support for Scorpious Peak2 support
Bluetooth: btintel: Add DSBR support for ScP2 onwards
Bluetooth: btintel_pcie: Add support for exception dump for ScP2
Bluetooth: btintel: Add support for Scorpious Peak2F support
Bluetooth: btintel_pcie: Add support for exception dump for ScP2F
Bluetooth: btintel_pcie: Add device id of Scorpius Peak2, Nova Lake-PCD-H
Bluetooth: btintel_pcie: Add device id of Scorpious2, Nova Lake-PCD-S
Bluetooth: btintel_pcie: Align shared DMA memory to 128 bytes
Luiz Augusto von Dentz (2):
Bluetooth: btintel_pci: Fix btintel_pcie_read_hwexp code style
Bluetooth: L2CAP: Fix printing wrong information if SDU length exceeds MTU
Lukas Kraft (1):
bluetooth: btusb: Fix whitespace in btusb.c
Marek Vasut (1):
Bluetooth: btbcm: Add entry for BCM4343A2 UART Bluetooth
Pauli Virtanen (3):
Bluetooth: hci_core: Rate limit the logging of invalid ISO handle
Bluetooth: hci_sync: make hci_cmd_sync_run_once return -EEXIST if exists
Bluetooth: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER
Sean Wang (8):
mmc: sdio: add MediaTek MT7902 SDIO device ID
Bluetooth: btmtk: add MT7902 MCU support
Bluetooth: btusb: Add new VID/PID 13d3/3579 for MT7902
Bluetooth: btusb: Add new VID/PID 13d3/3580 for MT7902
Bluetooth: btusb: Add new VID/PID 13d3/3594 for MT7902
Bluetooth: btusb: Add new VID/PID 13d3/3596 for MT7902
Bluetooth: btusb: Add new VID/PID 0e8d/1ede for MT7902
Bluetooth: btmtk: add MT7902 SDIO support
Shuai Zhang (2):
Bluetooth: hci_qca: disable power control for WCN7850 when bt_en is not defined
Bluetooth: hci_qca: Fix missing wakeup during SSR memdump handling
Shuvam Pandey (1):
Bluetooth: hci_event: fix potential UAF in SSP passkey handlers
Stefan Metzmacher (1):
Bluetooth: SCO: check for codecs->num_codecs == 1 before assigning to sco_pi(sk)->codec
Stefano Radaelli (1):
Bluetooth: hci_ll: Enable BROKEN_ENHANCED_SETUP_SYNC_CONN for WL183x
Thorsten Blum (3):
Bluetooth: btintel_pcie: Replace snprintf("%s") with strscpy
Bluetooth: btintel_pcie: Use struct_size to improve hci_drv_read_info
Bluetooth: btintel_pcie: use strscpy to copy plain strings
Vivek Sahu (1):
Bluetooth: qca: Refactor code on the basis of chipset names
drivers/bluetooth/btbcm.c | 11 ++--
drivers/bluetooth/btintel.c | 109 ++++++++++++++++++++++++++++------
drivers/bluetooth/btintel.h | 20 +++++--
drivers/bluetooth/btintel_pcie.c | 122 ++++++++++++++++++++++++---------------
drivers/bluetooth/btintel_pcie.h | 3 -
drivers/bluetooth/btmtk.c | 115 ++++++++++++++++++++++++++----------
drivers/bluetooth/btmtk.h | 9 ++-
drivers/bluetooth/btmtksdio.c | 44 +++++++++-----
drivers/bluetooth/btqca.c | 37 ++++++------
drivers/bluetooth/btusb.c | 84 +++++++++++++--------------
drivers/bluetooth/hci_ldisc.c | 3 +
drivers/bluetooth/hci_ll.c | 10 ++++
drivers/bluetooth/hci_qca.c | 84 ++++++++++++++++-----------
include/linux/mmc/sdio_ids.h | 1 +
include/net/bluetooth/hci.h | 16 +++--
net/bluetooth/hci_conn.c | 4 +-
net/bluetooth/hci_core.c | 4 +-
net/bluetooth/hci_event.c | 21 ++++---
net/bluetooth/hci_sync.c | 2 +-
net/bluetooth/l2cap_core.c | 15 ++++-
net/bluetooth/sco.c | 3 +-
21 files changed, 476 insertions(+), 241 deletions(-)
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2026-04-10 17:22 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-04-10 17:22 [GIT PULL] bluetooth-next 2026-04-10 Luiz Augusto von Dentz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox