From: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
To: Manivannan Sadhasivam <mani@kernel.org>,
Richard Cochran <richardcochran@gmail.com>
Cc: mhi@lists.linux.dev, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Subject: [PATCH v2 3/6] bus: mhi: host: Add support for 64bit register reads and writes
Date: Sat, 11 Apr 2026 13:42:03 +0530 [thread overview]
Message-ID: <20260411-tsc_timesync-v2-3-6f25f72987b3@oss.qualcomm.com> (raw)
In-Reply-To: <20260411-tsc_timesync-v2-0-6f25f72987b3@oss.qualcomm.com>
Some mhi registers are of 64 bit size, instead of reading high value
and low value separately provide a new function op to read & write to
64 bit register.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
---
drivers/bus/mhi/host/main.c | 12 ++++++++++++
include/linux/mhi.h | 6 ++++++
2 files changed, 18 insertions(+)
diff --git a/drivers/bus/mhi/host/main.c b/drivers/bus/mhi/host/main.c
index b7a727b1a5d1f20b570c62707a991ec5b85bfec7..99917593e1da06f1dece7b5b0037c2485953410f 100644
--- a/drivers/bus/mhi/host/main.c
+++ b/drivers/bus/mhi/host/main.c
@@ -67,6 +67,18 @@ void mhi_write_reg(struct mhi_controller *mhi_cntrl, void __iomem *base,
mhi_cntrl->write_reg(mhi_cntrl, base + offset, val);
}
+static int __must_check mhi_read_reg64(struct mhi_controller *mhi_cntrl,
+ void __iomem *base, u32 offset, u64 *out)
+{
+ return mhi_cntrl->read_reg64(mhi_cntrl, base + offset, out);
+}
+
+static void __maybe_unused mhi_write_reg64(struct mhi_controller *mhi_cntrl, void __iomem *base,
+ u32 offset, u64 val)
+{
+ mhi_cntrl->write_reg64(mhi_cntrl, base + offset, val);
+}
+
int __must_check mhi_write_reg_field(struct mhi_controller *mhi_cntrl,
void __iomem *base, u32 offset, u32 mask,
u32 val)
diff --git a/include/linux/mhi.h b/include/linux/mhi.h
index f39c8ca7c251954f2d83c1227d206b600b88c75f..8e7257a9c907fb03571a86e29db5534f492678c7 100644
--- a/include/linux/mhi.h
+++ b/include/linux/mhi.h
@@ -376,6 +376,8 @@ struct mhi_timesync_info {
* @unmap_single: CB function to destroy TRE buffer
* @read_reg: Read a MHI register via the physical link (required)
* @write_reg: Write a MHI register via the physical link (required)
+ * @read_reg64: Read a 64 bit MHI register via the physical link (optional)
+ * @write_reg64: Write a 64 bit MHI register via the physical link (optional)
* @reset: Controller specific reset function (optional)
* @edl_trigger: CB function to trigger EDL mode (optional)
* @buffer_len: Bounce buffer length
@@ -462,6 +464,10 @@ struct mhi_controller {
u32 *out);
void (*write_reg)(struct mhi_controller *mhi_cntrl, void __iomem *addr,
u32 val);
+ int (*read_reg64)(struct mhi_controller *mhi_cntrl, void __iomem *addr,
+ u64 *out);
+ void (*write_reg64)(struct mhi_controller *mhi_cntrl, void __iomem *addr,
+ u64 val);
void (*reset)(struct mhi_controller *mhi_cntrl);
int (*edl_trigger)(struct mhi_controller *mhi_cntrl);
--
2.34.1
next prev parent reply other threads:[~2026-04-11 8:12 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-11 8:12 [PATCH v2 0/6] bus: mhi: host: mhi_phc: Add support for PHC over MHI Krishna Chaitanya Chundru
2026-04-11 8:12 ` [PATCH v2 1/6] bus: mhi: host: Add support to read MHI capabilities Krishna Chaitanya Chundru
2026-04-11 8:12 ` [PATCH v2 2/6] bus: mhi: host: Add support for non-posted TSC timesync feature Krishna Chaitanya Chundru
2026-04-11 13:43 ` Jie Gan
2026-04-13 6:42 ` Manivannan Sadhasivam
2026-04-13 7:27 ` Manivannan Sadhasivam
2026-04-14 17:46 ` Vadim Fedorenko
2026-04-11 8:12 ` Krishna Chaitanya Chundru [this message]
2026-04-11 8:12 ` [PATCH v2 4/6] bus: mhi: pci_generic: Add support for 64 bit register read & write Krishna Chaitanya Chundru
2026-04-11 8:12 ` [PATCH v2 5/6] bus: mhi: host: Update the Time sync logic to read 64 bit register value Krishna Chaitanya Chundru
2026-04-11 8:12 ` [PATCH v2 6/6] bus: mhi: host: mhi_phc: Add support for PHC over MHI Krishna Chaitanya Chundru
2026-04-11 13:50 ` Jie Gan
2026-04-13 8:06 ` Manivannan Sadhasivam
2026-04-12 15:09 ` [PATCH v2 0/6] " Jakub Kicinski
2026-04-13 5:44 ` Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260411-tsc_timesync-v2-3-6f25f72987b3@oss.qualcomm.com \
--to=krishna.chundru@oss.qualcomm.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mani@kernel.org \
--cc=mhi@lists.linux.dev \
--cc=netdev@vger.kernel.org \
--cc=richardcochran@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox