From: Weiming Shi <bestswngs@gmail.com>
To: Aaron Conole <aconole@redhat.com>,
Eelco Chaudron <echaudro@redhat.com>,
Ilya Maximets <i.maximets@ovn.org>,
"David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>,
Pravin B Shelar <pshelar@nicira.com>,
Alex Wang <alexw@nicira.com>, Thomas Graf <tgraf@redhat.com>,
netdev@vger.kernel.org, dev@openvswitch.org,
Xiang Mei <xmei5@asu.edu>, Weiming Shi <bestswngs@gmail.com>
Subject: [PATCH net v4] openvswitch: cap upcall PID array size and pre-size vport replies
Date: Wed, 15 Apr 2026 05:51:22 -0700 [thread overview]
Message-ID: <20260415125121.110874-2-bestswngs@gmail.com> (raw)
The vport netlink reply helpers allocate a fixed-size skb with
nlmsg_new(NLMSG_DEFAULT_SIZE, ...) but serialize the full upcall PID
array via ovs_vport_get_upcall_portids(). Since
ovs_vport_set_upcall_portids() accepts any non-zero multiple of
sizeof(u32) with no upper bound, a CAP_NET_ADMIN user can install a PID
array large enough to overflow the reply buffer, causing nla_put() to
fail with -EMSGSIZE and hitting BUG_ON(err < 0). On systems with
unprivileged user namespaces enabled (e.g., Ubuntu default), this is
reachable via unshare -Urn since OVS vport mutation operations use
GENL_UNS_ADMIN_PERM.
kernel BUG at net/openvswitch/datapath.c:2414!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 1 UID: 0 PID: 65 Comm: poc Not tainted 7.0.0-rc7-00195-geb216e422044 #1
RIP: 0010:ovs_vport_cmd_set+0x34c/0x400
Call Trace:
<TASK>
genl_family_rcv_msg_doit (net/netlink/genetlink.c:1116)
genl_rcv_msg (net/netlink/genetlink.c:1194)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
genl_rcv (net/netlink/genetlink.c:1219)
netlink_unicast (net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sys_sendto (net/socket.c:2206)
__x64_sys_sendto (net/socket.c:2209)
do_syscall_64 (arch/x86/entry/syscall_64.c:63)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
Kernel panic - not syncing: Fatal exception
Reject attempts to set more PIDs than nr_cpu_ids in
ovs_vport_set_upcall_portids(), and pre-compute the worst-case reply
size in ovs_vport_cmd_msg_size() based on that bound, similar to the
existing ovs_dp_cmd_msg_size(). nr_cpu_ids matches the cap already
used by the per-CPU dispatch configuration on the datapath side
(ovs_dp_cmd_fill_info() serialises at most nr_cpu_ids PIDs), so the
two sides stay consistent.
Fixes: 5cd667b0a456 ("openvswitch: Allow each vport to have an array of 'port_id's.")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
---
v4 (per Ilya):
- Use nr_cpu_ids instead of num_possible_cpus() for consistency with
the per-CPU dispatch on the datapath side.
- Annotate ovs_vport_cmd_msg_size() per-attribute; split nested sums.
v3: Cap at num_possible_cpus(); add ovs_vport_cmd_msg_size(); keep
BUG_ON(); fix Fixes tag.
v2: Dynamically size reply skb; drop WARN_ON_ONCE, return plain errors.
---
net/openvswitch/datapath.c | 33 +++++++++++++++++++++++++++++++--
net/openvswitch/vport.c | 3 +++
2 files changed, 34 insertions(+), 2 deletions(-)
diff --git a/net/openvswitch/datapath.c b/net/openvswitch/datapath.c
index e209099218b4..35e67e51b0d2 100644
--- a/net/openvswitch/datapath.c
+++ b/net/openvswitch/datapath.c
@@ -2184,9 +2184,38 @@ static int ovs_vport_cmd_fill_info(struct vport *vport, struct sk_buff *skb,
return err;
}
+static size_t ovs_vport_cmd_msg_size(void)
+{
+ size_t msgsize = NLMSG_ALIGN(sizeof(struct ovs_header));
+
+ msgsize += nla_total_size(sizeof(u32)); /* OVS_VPORT_ATTR_PORT_NO */
+ msgsize += nla_total_size(sizeof(u32)); /* OVS_VPORT_ATTR_TYPE */
+ msgsize += nla_total_size(IFNAMSIZ); /* OVS_VPORT_ATTR_NAME */
+ msgsize += nla_total_size(sizeof(u32)); /* OVS_VPORT_ATTR_IFINDEX */
+ msgsize += nla_total_size(sizeof(s32)); /* OVS_VPORT_ATTR_NETNSID */
+ /* OVS_VPORT_ATTR_STATS */
+ msgsize += nla_total_size_64bit(sizeof(struct ovs_vport_stats));
+ /* OVS_VPORT_ATTR_UPCALL_STATS(OVS_VPORT_UPCALL_ATTR_SUCCESS +
+ * OVS_VPORT_UPCALL_ATTR_FAIL)
+ */
+ msgsize += nla_total_size(nla_total_size_64bit(sizeof(u64)) +
+ nla_total_size_64bit(sizeof(u64)));
+ /* OVS_VPORT_ATTR_UPCALL_PID (capped at nr_cpu_ids by
+ * ovs_vport_set_upcall_portids())
+ */
+ msgsize += nla_total_size(nr_cpu_ids * sizeof(u32));
+ /* OVS_VPORT_ATTR_OPTIONS(OVS_TUNNEL_ATTR_DST_PORT +
+ * OVS_TUNNEL_ATTR_EXTENSION(OVS_VXLAN_EXT_GBP))
+ */
+ msgsize += nla_total_size(nla_total_size(sizeof(u16)) +
+ nla_total_size(nla_total_size(0)));
+
+ return msgsize;
+}
+
static struct sk_buff *ovs_vport_cmd_alloc_info(void)
{
- return nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ return genlmsg_new(ovs_vport_cmd_msg_size(), GFP_KERNEL);
}
/* Called with ovs_mutex, only via ovs_dp_notify_wq(). */
@@ -2196,7 +2225,7 @@ struct sk_buff *ovs_vport_cmd_build_info(struct vport *vport, struct net *net,
struct sk_buff *skb;
int retval;
- skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+ skb = ovs_vport_cmd_alloc_info();
if (!skb)
return ERR_PTR(-ENOMEM);
diff --git a/net/openvswitch/vport.c b/net/openvswitch/vport.c
index 23f629e94a36..56b2e2d1a749 100644
--- a/net/openvswitch/vport.c
+++ b/net/openvswitch/vport.c
@@ -406,6 +406,9 @@ int ovs_vport_set_upcall_portids(struct vport *vport, const struct nlattr *ids)
if (!nla_len(ids) || nla_len(ids) % sizeof(u32))
return -EINVAL;
+ if (nla_len(ids) / sizeof(u32) > nr_cpu_ids)
+ return -EINVAL;
+
old = ovsl_dereference(vport->upcall_portids);
vport_portids = kmalloc(sizeof(*vport_portids) + nla_len(ids),
--
2.43.0
next reply other threads:[~2026-04-15 12:51 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-15 12:51 Weiming Shi [this message]
2026-04-15 22:41 ` [PATCH net v4] openvswitch: cap upcall PID array size and pre-size vport replies Ilya Maximets
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260415125121.110874-2-bestswngs@gmail.com \
--to=bestswngs@gmail.com \
--cc=aconole@redhat.com \
--cc=alexw@nicira.com \
--cc=davem@davemloft.net \
--cc=dev@openvswitch.org \
--cc=echaudro@redhat.com \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=i.maximets@ovn.org \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=pshelar@nicira.com \
--cc=tgraf@redhat.com \
--cc=xmei5@asu.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox