public inbox for netdev@vger.kernel.org
 help / color / mirror / Atom feed
From: Ratheesh Kannoth <rkannoth@marvell.com>
To: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <sgoutham@marvell.com>, <davem@davemloft.net>,
	<edumazet@google.com>, <kuba@kernel.org>, <pabeni@redhat.com>,
	<andrew+netdev@lunn.ch>, <dan.carpenter@linaro.org>,
	Ratheesh Kannoth <rkannoth@marvell.com>,
	"Dan Carpenter" <error27@gmail.com>
Subject: [PATCH v2 net 03/11] octeontx2-af: npc: cn20k: Propagate errors in defrag MCAM alloc rollback
Date: Mon, 20 Apr 2026 08:04:34 +0530	[thread overview]
Message-ID: <20260420023442.3295891-4-rkannoth@marvell.com> (raw)
In-Reply-To: <20260420023442.3295891-1-rkannoth@marvell.com>

npc_defrag_alloc_free_slots() allocates MCAM indexes in up to two passes
on bank0 then bank1.  On failure it rolls back by freeing entries already
placed in save[].

__npc_subbank_alloc() can return a negative errno while only part of the
indexes are valid.  The rollback loop used rc for
npc_mcam_idx_2_subbank_idx() as well, so a successful lookup stored zero
in rc and a later __npc_subbank_free() failure could still end with
return 0 when the allocation path had also left rc at zero
(for example shortfall after zero return values from the alloc helpers).

Jump to the rollback path immediately when either __npc_subbank_alloc()
call fails, preserving its errno.  If both calls succeed but the total
allocated count is still less than cnt, set rc to -ENOSPC before rollback.
Use a separate err variable for npc_mcam_idx_2_subbank_idx() so a
successful lookup no longer clears a non-zero rc from the allocation
phase.

Cc: Dan Carpenter <error27@gmail.com>
Fixes: 645c6e3c1999 ("octeontx2-af: npc: cn20k: virtual index support")
Link: https://lore.kernel.org/netdev/adjNJEpILRZATB2N@stanley.mountain/
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
---
 .../net/ethernet/marvell/octeontx2/af/cn20k/npc.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/cn20k/npc.c b/drivers/net/ethernet/marvell/octeontx2/af/cn20k/npc.c
index 18d70f4527d1..7f897ce0d17d 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/cn20k/npc.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/cn20k/npc.c
@@ -3502,7 +3502,7 @@ static int npc_defrag_alloc_free_slots(struct rvu *rvu,
 {
 	int alloc_cnt1, alloc_cnt2;
 	struct npc_subbank *sb;
-	int rc, sb_off, i;
+	int rc, sb_off, i, err;
 	bool deleted;
 
 	sb = &npc_priv.sb[f->idx];
@@ -3516,6 +3516,9 @@ static int npc_defrag_alloc_free_slots(struct rvu *rvu,
 				 NPC_MCAM_LOWER_PRIO,
 				 false, cnt, save, cnt, true,
 				 &alloc_cnt1);
+	if (rc)
+		goto fail_free_alloc;
+
 	if (alloc_cnt1 < cnt) {
 		rc = __npc_subbank_alloc(rvu, sb,
 					 NPC_MCAM_KEY_X2, sb->b1b,
@@ -3525,21 +3528,25 @@ static int npc_defrag_alloc_free_slots(struct rvu *rvu,
 					 save + alloc_cnt1,
 					 cnt - alloc_cnt1,
 					 true, &alloc_cnt2);
+		if (rc)
+			goto fail_free_alloc;
 	}
 
 	if (alloc_cnt1 + alloc_cnt2 != cnt) {
 		dev_err(rvu->dev,
 			"%s: Failed to alloc cnt=%u alloc_cnt1=%u alloc_cnt2=%u\n",
 			__func__, cnt, alloc_cnt1, alloc_cnt2);
+		rc = -ENOSPC;
 		goto fail_free_alloc;
 	}
+
 	return 0;
 
 fail_free_alloc:
 	for (i = 0; i < alloc_cnt1 + alloc_cnt2; i++) {
-		rc =  npc_mcam_idx_2_subbank_idx(rvu, save[i],
-						 &sb, &sb_off);
-		if (rc) {
+		err =  npc_mcam_idx_2_subbank_idx(rvu, save[i],
+						  &sb, &sb_off);
+		if (err) {
 			dev_err(rvu->dev,
 				"%s: Error to find subbank for mcam idx=%u\n",
 				__func__, save[i]);
-- 
2.43.0


  parent reply	other threads:[~2026-04-20  2:35 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-04-20  2:34 [PATCH v2 net 0/11] octeontx2-af: npc: cn20k: MCAM fixes Ratheesh Kannoth
2026-04-20  2:34 ` [PATCH v2 net 01/11] octeontx2-af: npc: cn20k: Propagate MCAM key-type errors on cn20k Ratheesh Kannoth
2026-04-20  2:34 ` [PATCH v2 net 02/11] octeontx2-af: npc: cn20k: Drop debugfs_create_file() error checks in init Ratheesh Kannoth
2026-04-20  2:34 ` Ratheesh Kannoth [this message]
2026-04-20  2:34 ` [PATCH v2 net 04/11] octeontx2-af: npc: cn20k: Make default entries as x4 Ratheesh Kannoth
2026-04-20  2:34 ` [PATCH v2 net 05/11] octeontx2-af: npc: cn20k: Reject request for x4 entries in x2 profile Ratheesh Kannoth
2026-04-20  2:34 ` [PATCH v2 net 06/11] octeontx2-af: npc: cn20k: Clear MCAM entries by index and key width Ratheesh Kannoth
2026-04-20  2:34 ` [PATCH v2 net 07/11] octeontx2-af: npc: cn20k: Fix bank value Ratheesh Kannoth
2026-04-20  2:34 ` [PATCH v2 net 08/11] octeontx2-af: npc: cn20k: Fix MCAM actions read Ratheesh Kannoth
2026-04-20  2:34 ` [PATCH v2 net 09/11] octeontx2-af: npc: cn20k: Initialize default-rule index outputs up front Ratheesh Kannoth
2026-04-20  2:34 ` [PATCH v2 net 10/11] octeontx2-af: npc: cn20k: Tear down default MCAM rules explicitly on free Ratheesh Kannoth
2026-04-20  2:34 ` [PATCH v2 net 11/11] octeontx2-af: npc: cn20k: Reject missing default-rule MCAM indices Ratheesh Kannoth

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260420023442.3295891-4-rkannoth@marvell.com \
    --to=rkannoth@marvell.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=dan.carpenter@linaro.org \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=error27@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=sgoutham@marvell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox