[net-next v2 1/3] net: phy: motorcomm: move mdio lock out from yt8531_set_ds()

[Minda Chen <minda.chen@starfivetech.com>]

yt8531_set_ds() default set register with mdio lock and only called
with YT8531 PHY. But new type YT8531s support RGMII and has the same
pin strength setting with YT8531, YT8531s need to call yt8531_set_ds()
setting pin drive strength. But YT8531s config init function
yt8521_config_init() already get the mdio lock with phy_select_page().
If calling yt8521_config_init() with mdio lock will cause dead lock.

Need to get the lock before calling yt8531_get_ds() and move mdio
lock out from it can solve this issue.

Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
---
 drivers/net/phy/motorcomm.c | 23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c
index 4d62f7b36212..c66804537aa2 100644
--- a/drivers/net/phy/motorcomm.c
+++ b/drivers/net/phy/motorcomm.c
@@ -974,7 +974,8 @@ static u32 yt8531_get_ldo_vol(struct phy_device *phydev)
 {
 	u32 val;
 
-	val = ytphy_read_ext_with_lock(phydev, YT8521_CHIP_CONFIG_REG);
+	val = ytphy_read_ext(phydev, YT8521_CHIP_CONFIG_REG);
+
 	val = FIELD_GET(YT8531_RGMII_LDO_VOL_MASK, val);
 
 	return val <= YT8531_LDO_VOL_1V8 ? val : YT8531_LDO_VOL_1V8;
@@ -1010,10 +1011,11 @@ static int yt8531_set_ds(struct phy_device *phydev)
 		ds = YT8531_RGMII_RX_DS_DEFAULT;
 	}
 
-	ret = ytphy_modify_ext_with_lock(phydev,
-					 YTPHY_PAD_DRIVE_STRENGTH_REG,
-					 YT8531_RGMII_RXC_DS_MASK,
-					 FIELD_PREP(YT8531_RGMII_RXC_DS_MASK, ds));
+	ret = ytphy_modify_ext(phydev,
+			       YTPHY_PAD_DRIVE_STRENGTH_REG,
+			       YT8531_RGMII_RXC_DS_MASK,
+			       FIELD_PREP(YT8531_RGMII_RXC_DS_MASK, ds));
+
 	if (ret < 0)
 		return ret;
 
@@ -1033,10 +1035,11 @@ static int yt8531_set_ds(struct phy_device *phydev)
 	ds_field_low = FIELD_GET(GENMASK(1, 0), ds);
 	ds_field_low = FIELD_PREP(YT8531_RGMII_RXD_DS_LOW_MASK, ds_field_low);
 
-	ret = ytphy_modify_ext_with_lock(phydev,
-					 YTPHY_PAD_DRIVE_STRENGTH_REG,
-					 YT8531_RGMII_RXD_DS_LOW_MASK | YT8531_RGMII_RXD_DS_HI_MASK,
-					 ds_field_low | ds_field_hi);
+	ret = ytphy_modify_ext(phydev,
+			       YTPHY_PAD_DRIVE_STRENGTH_REG,
+			       YT8531_RGMII_RXD_DS_LOW_MASK | YT8531_RGMII_RXD_DS_HI_MASK,
+			       ds_field_low | ds_field_hi);
+
 	if (ret < 0)
 		return ret;
 
@@ -1826,7 +1829,9 @@ static int yt8531_config_init(struct phy_device *phydev)
 			return ret;
 	}
 
+	phy_lock_mdio_bus(phydev);
 	ret = yt8531_set_ds(phydev);
+	phy_unlock_mdio_bus(phydev);
 	if (ret < 0)
 		return ret;
 
-- 
2.17.1