public inbox for netdev@vger.kernel.org
 help / color / mirror / Atom feed
From: Jiawen Wu <jiawenwu@trustnetic.com>
To: netdev@vger.kernel.org
Cc: Mengyuan Lou <mengyuanlou@net-swift.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Richard Cochran <richardcochran@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	Simon Horman <horms@kernel.org>, Kees Cook <kees@kernel.org>,
	Larysa Zaremba <larysa.zaremba@intel.com>,
	Breno Leitao <leitao@debian.org>, Joe Damato <joe@dama.to>,
	Jacob Keller <jacob.e.keller@intel.com>,
	Fabio Baltieri <fabio.baltieri@gmail.com>,
	Jiawen Wu <jiawenwu@trustnetic.com>
Subject: [RFC PATCH net-next 1/5] net: ngbe: implement libwx reset ops
Date: Wed, 22 Apr 2026 17:56:13 +0800	[thread overview]
Message-ID: <20260422095617.27080-2-jiawenwu@trustnetic.com> (raw)
In-Reply-To: <20260422095617.27080-1-jiawenwu@trustnetic.com>

Implement wx->do_reset() for library module calling.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
 .../net/ethernet/wangxun/ngbe/ngbe_ethtool.c  |  1 -
 drivers/net/ethernet/wangxun/ngbe/ngbe_main.c | 37 ++++++++++++++++++-
 drivers/net/ethernet/wangxun/ngbe/ngbe_type.h |  1 +
 3 files changed, 36 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_ethtool.c b/drivers/net/ethernet/wangxun/ngbe/ngbe_ethtool.c
index b2e191982803..1960f7154151 100644
--- a/drivers/net/ethernet/wangxun/ngbe/ngbe_ethtool.c
+++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_ethtool.c
@@ -59,7 +59,6 @@ static int ngbe_set_ringparam(struct net_device *netdev,
 	wx_set_ring(wx, new_tx_count, new_rx_count, temp_ring);
 	kvfree(temp_ring);
 
-	wx_configure(wx);
 	ngbe_up(wx);
 
 clear_reset:
diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c b/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c
index d8e3827a8b1f..bd905e267575 100644
--- a/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c
+++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_main.c
@@ -133,6 +133,7 @@ static int ngbe_sw_init(struct wx *wx)
 
 	wx->mbx.size = WX_VXMAILBOX_SIZE;
 	wx->setup_tc = ngbe_setup_tc;
+	wx->do_reset = ngbe_do_reset;
 	set_bit(0, &wx->fwd_bitmask);
 
 	return 0;
@@ -422,7 +423,7 @@ void ngbe_down(struct wx *wx)
 	wx_clean_all_rx_rings(wx);
 }
 
-void ngbe_up(struct wx *wx)
+static void ngbe_up_complete(struct wx *wx)
 {
 	wx_configure_vectors(wx);
 
@@ -488,7 +489,7 @@ static int ngbe_open(struct net_device *netdev)
 
 	wx_ptp_init(wx);
 
-	ngbe_up(wx);
+	ngbe_up_complete(wx);
 
 	return 0;
 err_dis_phy:
@@ -501,6 +502,12 @@ static int ngbe_open(struct net_device *netdev)
 	return err;
 }
 
+void ngbe_up(struct wx *wx)
+{
+	wx_configure(wx);
+	ngbe_up_complete(wx);
+}
+
 /**
  * ngbe_close - Disables a network interface
  * @netdev: network interface device structure
@@ -588,6 +595,8 @@ int ngbe_setup_tc(struct net_device *dev, u8 tc)
 	 */
 	if (netif_running(dev))
 		ngbe_close(dev);
+	else
+		ngbe_reset(wx);
 
 	wx_clear_interrupt_scheme(wx);
 
@@ -604,6 +613,30 @@ int ngbe_setup_tc(struct net_device *dev, u8 tc)
 	return 0;
 }
 
+static void ngbe_reinit_locked(struct wx *wx)
+{
+	netif_trans_update(wx->netdev);
+
+	mutex_lock(&wx->reset_lock);
+	set_bit(WX_STATE_RESETTING, wx->state);
+
+	ngbe_down(wx);
+	ngbe_up(wx);
+
+	clear_bit(WX_STATE_RESETTING, wx->state);
+	mutex_unlock(&wx->reset_lock);
+}
+
+void ngbe_do_reset(struct net_device *netdev)
+{
+	struct wx *wx = netdev_priv(netdev);
+
+	if (netif_running(netdev))
+		ngbe_reinit_locked(wx);
+	else
+		ngbe_reset(wx);
+}
+
 static const struct net_device_ops ngbe_netdev_ops = {
 	.ndo_open               = ngbe_open,
 	.ndo_stop               = ngbe_close,
diff --git a/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h b/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h
index 7077a0da4c98..4f648f272c08 100644
--- a/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h
+++ b/drivers/net/ethernet/wangxun/ngbe/ngbe_type.h
@@ -125,5 +125,6 @@ extern char ngbe_driver_name[];
 void ngbe_down(struct wx *wx);
 void ngbe_up(struct wx *wx);
 int ngbe_setup_tc(struct net_device *dev, u8 tc);
+void ngbe_do_reset(struct net_device *netdev);
 
 #endif /* _NGBE_TYPE_H_ */
-- 
2.51.0


  reply	other threads:[~2026-04-22  9:57 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-04-22  9:56 [RFC PATCH net-next 0/5] net: wangxun: timeout and error Jiawen Wu
2026-04-22  9:56 ` Jiawen Wu [this message]
2026-04-22  9:56 ` [RFC PATCH net-next 2/5] net: wangxun: add Tx timeout process Jiawen Wu
2026-04-22  9:56 ` [RFC PATCH net-next 3/5] net: wangxun: add reinit parameter to wx->do_reset callback Jiawen Wu
2026-04-22  9:56 ` [RFC PATCH net-next 4/5] net: wangxun: extract the close_suspend sequence Jiawen Wu
2026-04-22  9:56 ` [RFC PATCH net-next 5/5] net: wangxun: implement pci_error_handlers ops Jiawen Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260422095617.27080-2-jiawenwu@trustnetic.com \
    --to=jiawenwu@trustnetic.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=fabio.baltieri@gmail.com \
    --cc=horms@kernel.org \
    --cc=jacob.e.keller@intel.com \
    --cc=joe@dama.to \
    --cc=kees@kernel.org \
    --cc=kuba@kernel.org \
    --cc=larysa.zaremba@intel.com \
    --cc=leitao@debian.org \
    --cc=linux@armlinux.org.uk \
    --cc=mengyuanlou@net-swift.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=richardcochran@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox