[PATCH net] ipv6: rpl: add NULL check for idev in ipv6_rpl_srh_rcv()

[Andrea Mayer <andrea.mayer@uniroma2.it>]

ipv6_rpl_srh_rcv() dereferences idev from __in6_dev_get() without
a NULL check when reading idev->cnf.rpl_seg_enabled.
When the device's MTU drops below IPV6_MIN_MTU, addrconf_ifdown()
clears dev->ip6_ptr through RCU_INIT_POINTER(), which is immediately
visible to concurrent readers. A packet that already passed the idev
check in ip6_rcv_core() can race with this and hit a NULL pointer
dereference.

Reproduced by flooding traffic through a route with RPL source routing
while rapidly flapping the receiving interface's MTU between 1500 and
1200:

 BUG: KASAN: null-ptr-deref in ipv6_rpl_srh_rcv+0xae/0x1050
 Read of size 4 at addr 00000000000006b4 by task ping6/318

 CPU: 0 UID: 0 PID: 318 Comm: ping6 Not tainted 7.1.0-rc1-micro-vm-dev-g46f74a3f7d57 #82 PREEMPT(full)
 Call Trace:
  <IRQ>
  kasan_report+0xc6/0x100
  ipv6_rpl_srh_rcv+0xae/0x1050
  ip6_protocol_deliver_rcu+0x717/0x960
  ip6_input_finish+0xa3/0x1b0
  ip6_input+0xdc/0x490
  ipv6_rcv+0x338/0x460
  __netif_receive_skb_one_core+0xd1/0x130
  process_backlog+0x2c7/0x9f0
  __napi_poll.constprop.0+0x51/0x270
  net_rx_action+0x322/0x730
  handle_softirqs+0x119/0x640
  do_softirq+0xae/0xe0
  </IRQ>

Add a NULL check for idev after __in6_dev_get() and drop the skb if
idev is NULL, consistent with the SRv6 fix in commit 064137935262
("ipv6: add NULL checks for idev in SRv6 paths").

Fixes: 8610c7c6e3bd ("net: ipv6: add support for rpl sr exthdr")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
---
 net/ipv6/exthdrs.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c
index 03cbce842c1a..e398a8851031 100644
--- a/net/ipv6/exthdrs.c
+++ b/net/ipv6/exthdrs.c
@@ -499,6 +499,10 @@ static int ipv6_rpl_srh_rcv(struct sk_buff *skb)
 	u32 r;
 
 	idev = __in6_dev_get(skb->dev);
+	if (!idev) {
+		kfree_skb(skb);
+		return -1;
+	}
 
 	accept_rpl_seg = min(READ_ONCE(net->ipv6.devconf_all->rpl_seg_enabled),
 			     READ_ONCE(idev->cnf.rpl_seg_enabled));
-- 
2.20.1