From: Ioana Ciornei <ioana.ciornei@nxp.com>
To: andrew+netdev@lunn.ch, davem@davemloft.net, edumazet@google.com,
kuba@kernel.org, pabeni@redhat.com, netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH net-next 00/13] dpaa2-switch: add support for LAG offload
Date: Wed, 6 May 2026 18:15:27 +0300 [thread overview]
Message-ID: <20260506151540.1242997-1-ioana.ciornei@nxp.com> (raw)
This patch set adds support in dpaa2-switch for offloading upper bond
devices.
The first patch adds the necessary new APIs for the LAG configuration
while the second patch uses them, both in the prechangeupper phase and
the changeupper one. Which ports can be part of the same LAG group is
configurable at boot time, thus we use the prechangeupper callback in
order to validate that a requested configuration can be offloaded or
not.
Patches 3 and 4 are updating the logic around choosing the FDB that
should be used on a switch port. This is necessary since with the
addition of the LAG offload, we need to take into account all ports
which are under the same bridge, even though not directly.
This set also extends the handling of FDBs and port objects so that they
are handled by the driver even on an offloaded bond device.
Ioana Ciornei (13):
dpaa2-switch: add LAG configuration API
dpaa2-switch: add support for LAG offload
dpaa2-switch: change dpaa2_switch_port_set_fdb() function prototype
dpaa2-switch: extend dpaa2_switch_port_set_fdb() to cover bond
scenarios
dpaa2-switch: add dpaa2_switch_port_to_bridge_port() helper
dpaa2-switch: create a separate dpaa2_switch_port_fdb_event() function
dpaa2-switch: check early if an FDB entry should be added
dpaa2-switch: consolidate unicast and multicast management
dpaa2-switch: offload FDBs added on an upper bond device
dpaa2-switch: offload port objects on an upper bond device
dpaa2-switch: trap all link local reserved addresses to the CPU
dpaa2-switch: add support for imprecise source port
dpaa2-switch: do not error out when the same VLAN is installed
multiple times
.../ethernet/freescale/dpaa2/dpaa2-switch.c | 866 +++++++++++++++---
.../ethernet/freescale/dpaa2/dpaa2-switch.h | 39 +-
.../net/ethernet/freescale/dpaa2/dpsw-cmd.h | 18 +-
drivers/net/ethernet/freescale/dpaa2/dpsw.c | 57 ++
drivers/net/ethernet/freescale/dpaa2/dpsw.h | 20 +
5 files changed, 886 insertions(+), 114 deletions(-)
--
2.25.1
next reply other threads:[~2026-05-06 15:15 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-06 15:15 Ioana Ciornei [this message]
2026-05-06 15:15 ` [PATCH net-next 01/13] dpaa2-switch: add LAG configuration API Ioana Ciornei
2026-05-06 15:15 ` [PATCH net-next 02/13] dpaa2-switch: add support for LAG offload Ioana Ciornei
2026-05-08 12:39 ` Ioana Ciornei
2026-05-06 15:15 ` [PATCH net-next 03/13] dpaa2-switch: change dpaa2_switch_port_set_fdb() function prototype Ioana Ciornei
2026-05-08 11:00 ` Ioana Ciornei
2026-05-06 15:15 ` [PATCH net-next 04/13] dpaa2-switch: extend dpaa2_switch_port_set_fdb() to cover bond scenarios Ioana Ciornei
2026-05-08 13:50 ` Ioana Ciornei
2026-05-06 15:15 ` [PATCH net-next 05/13] dpaa2-switch: add dpaa2_switch_port_to_bridge_port() helper Ioana Ciornei
2026-05-08 14:10 ` [PATCH net-next 05/13] dpaa2-switch: add dpaa2_switch_port_to_bridge_port() helpe Ioana Ciornei
2026-05-06 15:15 ` [PATCH net-next 06/13] dpaa2-switch: create a separate dpaa2_switch_port_fdb_event() function Ioana Ciornei
2026-05-06 15:15 ` [PATCH net-next 07/13] dpaa2-switch: check early if an FDB entry should be added Ioana Ciornei
2026-05-08 14:34 ` Ioana Ciornei
2026-05-06 15:15 ` [PATCH net-next 08/13] dpaa2-switch: consolidate unicast and multicast management Ioana Ciornei
2026-05-08 14:46 ` Ioana Ciornei
2026-05-06 15:15 ` [PATCH net-next 09/13] dpaa2-switch: offload FDBs added on an upper bond device Ioana Ciornei
2026-05-08 15:20 ` Ioana Ciornei
2026-05-06 15:15 ` [PATCH net-next 10/13] dpaa2-switch: offload port objects " Ioana Ciornei
2026-05-11 9:07 ` Ioana Ciornei
2026-05-06 15:15 ` [PATCH net-next 11/13] dpaa2-switch: trap all link local reserved addresses to the CPU Ioana Ciornei
2026-05-06 15:15 ` [PATCH net-next 12/13] dpaa2-switch: add support for imprecise source port Ioana Ciornei
2026-05-07 11:42 ` Ioana Ciornei
2026-05-11 11:32 ` Ioana Ciornei
2026-05-06 15:15 ` [PATCH net-next 13/13] dpaa2-switch: do not error out when the same VLAN is installed multiple times Ioana Ciornei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260506151540.1242997-1-ioana.ciornei@nxp.com \
--to=ioana.ciornei@nxp.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox