[PATCH v1 3/6] dt-bindings: net: Document Infineon/Intel XMM6260 modem

[Svyatoslav Ryhel <clamor95@gmail.com>]

Describe the Infineon/Intel XMM6260, a 3G-focused, slim modem platform
designed for smartphones, data cards, and Machine-to-Machine (M2M)
applications.

Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
 .../bindings/net/infineon,xmm6260.yaml        | 72 +++++++++++++++++++
 1 file changed, 72 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/infineon,xmm6260.yaml

diff --git a/Documentation/devicetree/bindings/net/infineon,xmm6260.yaml b/Documentation/devicetree/bindings/net/infineon,xmm6260.yaml
new file mode 100644
index 000000000000..d34d7125274f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/infineon,xmm6260.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/infineon,xmm6260.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Infineon/Intel XMM6260 embedded USB modem
+
+description:
+  The Infineon/Intel XMM6260 is a 3G-focused, slim modem platform designed
+  for smartphones, data cards, and Machine-to-Machine (M2M) applications.
+  The modem is usually connected via the application processor's USB line
+  in HSIC mode; however, to work properly, the modem must control this line
+
+maintainers:
+  - Svyatoslav Ryhel <clamor95@gmail.com>
+
+properties:
+  compatible:
+    const: infineon,xmm6260
+
+  interrupts:
+    maxItems: 1
+
+  enable-gpios:
+    description: GPIO connected to the ON1 pin
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO connected to the RESET_PWRDWN_N pin
+    maxItems: 1
+
+  ap-wake-gpios:
+    description: GPIO connected to the EINT3 pin
+    maxItems: 1
+
+  cp-wake-gpios:
+    description: GPIO connected to the EINT2 pin
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  vbat-supply:
+    description: Supply connected to the VBAT lines.
+
+required:
+  - compatible
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    modem {
+        compatible = "infineon,xmm6260";
+
+        interrupt-parent = <&gpio>;
+        interrupts = <168 IRQ_TYPE_EDGE_BOTH>;
+
+        enable-gpios = <&gpio 112 GPIO_ACTIVE_HIGH>;
+        reset-gpios = <&gpio 169 GPIO_ACTIVE_LOW>;
+
+        cp-wake-gpios = <&gpio 151 GPIO_ACTIVE_HIGH>;
+        ap-wake-gpios = <&gpio 168 GPIO_ACTIVE_HIGH>;
+
+        phys = <&xmm6260_phy>;
+        vbat-supply = <&vdd_3v3_vbat>;
+    };
-- 
2.51.0