[PATCH net-next v3 1/6] dt-bindings: net: Add support for Airoha AN8801/R GbE PHY

[Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>]

From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Add a new binding to support the Airoha AN8801R Series Gigabit
Ethernet PHY.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
---
 .../devicetree/bindings/net/airoha,an8801.yaml     | 85 ++++++++++++++++++++++
 1 file changed, 85 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/airoha,an8801.yaml b/Documentation/devicetree/bindings/net/airoha,an8801.yaml
new file mode 100644
index 000000000000..b90b21b55053
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/airoha,an8801.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/airoha,an8801.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha AN8801R Series PHY
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+
+description:
+  The Airoha AN8801R is a low power single-port Ethernet PHY Transceiver
+  with Single-port serdes interface for 1000Base-X/RGMII; this chip is
+  compliant with 10Base-T, 100Base-TX and 1000Base-T IEEE 802.3(u,ab)
+  and supports Energy Efficient Ethernet (802.3az), Full Duplex Control
+  Flow (802.3x), auto-negotiation, crossover detect and autocorrection,
+  Wake-on-LAN with Magic Packet, and Jumbo Frame up to 9 Kilobytes.
+  This PHY also supports up to three user-configurable LEDs, which are
+  usually used for LAN Activity, 100M, 1000M indication.
+
+allOf:
+  - $ref: ethernet-phy.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ethernet-phy-idc0ff.0421
+
+  reg:
+    maxItems: 1
+
+  leds: true
+
+  wakeup-source:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Enable Wake-on-LAN support
+
+required:
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-phy@0 {
+            compatible = "ethernet-phy-idc0ff.0421";
+            reg = <0>;
+
+            leds {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                led@0 {
+                    reg = <0>;
+                    color = <LED_COLOR_ID_GREEN>;
+                    function = LED_FUNCTION_LAN;
+                    default-state = "keep";
+                };
+
+                led@1 {
+                    reg = <1>;
+                    color = <LED_COLOR_ID_GREEN>;
+                    function = LED_FUNCTION_LAN;
+                    function-enumerator = <1>;
+                    default-state = "keep";
+                };
+
+                led@2 {
+                    reg = <2>;
+                    color = <LED_COLOR_ID_YELLOW>;
+                    function = LED_FUNCTION_LAN;
+                    function-enumerator = <2>;
+                    default-state = "keep";
+                };
+            };
+        };
+    };

-- 
2.54.0