[net-next PATCH v5 1/8] net: dsa: realtek: rtl8365mb: use ERR_PTR

[Luiz Angelo Daros de Luca <luizluca@gmail.com>]

Convert numeric error codes into human-readable strings by
using %pe together with ERR_PTR() in dev_err() messages.

Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
---
 drivers/net/dsa/realtek/rtl8365mb.c | 51 +++++++++++++++++++++----------------
 1 file changed, 29 insertions(+), 22 deletions(-)

diff --git a/drivers/net/dsa/realtek/rtl8365mb.c b/drivers/net/dsa/realtek/rtl8365mb.c
index 0da048da533a..c04786be3f79 100644
--- a/drivers/net/dsa/realtek/rtl8365mb.c
+++ b/drivers/net/dsa/realtek/rtl8365mb.c
@@ -803,8 +803,8 @@ static int rtl8365mb_phy_read(struct realtek_priv *priv, int phy, int regnum)
 	ret = rtl8365mb_phy_ocp_read(priv, phy, ocp_addr, &val);
 	if (ret) {
 		dev_err(priv->dev,
-			"failed to read PHY%d reg %02x @ %04x, ret %d\n", phy,
-			regnum, ocp_addr, ret);
+			"failed to read PHY%d reg %02x @ %04x, ret %pe\n", phy,
+			regnum, ocp_addr, ERR_PTR(ret));
 		return ret;
 	}
 
@@ -831,8 +831,8 @@ static int rtl8365mb_phy_write(struct realtek_priv *priv, int phy, int regnum,
 	ret = rtl8365mb_phy_ocp_write(priv, phy, ocp_addr, val);
 	if (ret) {
 		dev_err(priv->dev,
-			"failed to write PHY%d reg %02x @ %04x, ret %d\n", phy,
-			regnum, ocp_addr, ret);
+			"failed to write PHY%d reg %02x @ %04x, ret %pe\n", phy,
+			regnum, ocp_addr, ERR_PTR(ret));
 		return ret;
 	}
 
@@ -1082,8 +1082,8 @@ static void rtl8365mb_phylink_mac_config(struct phylink_config *config,
 		ret = rtl8365mb_ext_config_rgmii(priv, port, state->interface);
 		if (ret)
 			dev_err(priv->dev,
-				"failed to configure RGMII mode on port %d: %d\n",
-				port, ret);
+				"failed to configure RGMII mode on port %d: %pe\n",
+				port, ERR_PTR(ret));
 		return;
 	}
 
@@ -1112,8 +1112,8 @@ static void rtl8365mb_phylink_mac_link_down(struct phylink_config *config,
 						     false, false);
 		if (ret)
 			dev_err(priv->dev,
-				"failed to reset forced mode on port %d: %d\n",
-				port, ret);
+				"failed to reset forced mode on port %d: %pe\n",
+				port, ERR_PTR(ret));
 
 		return;
 	}
@@ -1143,8 +1143,8 @@ static void rtl8365mb_phylink_mac_link_up(struct phylink_config *config,
 						     rx_pause);
 		if (ret)
 			dev_err(priv->dev,
-				"failed to force mode on port %d: %d\n", port,
-				ret);
+				"failed to force mode on port %d: %pe\n", port,
+				ERR_PTR(ret));
 
 		return;
 	}
@@ -1299,8 +1299,8 @@ static void rtl8365mb_get_ethtool_stats(struct dsa_switch *ds, int port, u64 *da
 						 mib->length, &data[i]);
 		if (ret) {
 			dev_err(priv->dev,
-				"failed to read port %d counters: %d\n", port,
-				ret);
+				"failed to read port %d counters: %pe\n", port,
+				ERR_PTR(ret));
 			break;
 		}
 	}
@@ -1652,7 +1652,8 @@ static irqreturn_t rtl8365mb_irq(int irq, void *data)
 	return IRQ_HANDLED;
 
 out_error:
-	dev_err(priv->dev, "failed to read interrupt status: %d\n", ret);
+	dev_err(priv->dev, "failed to read interrupt status: %pe\n",
+		ERR_PTR(ret));
 
 out_none:
 	return IRQ_NONE;
@@ -1725,10 +1726,13 @@ static int rtl8365mb_irq_setup(struct realtek_priv *priv)
 	/* rtl8365mb IRQs cascade off this one */
 	irq = of_irq_get(intc, 0);
 	if (irq <= 0) {
-		if (irq != -EPROBE_DEFER)
-			dev_err(priv->dev, "failed to get parent irq: %d\n",
-				irq);
-		ret = irq ? irq : -EINVAL;
+		if (!irq) {
+			dev_err(priv->dev, "failed map IRQ\n");
+			ret = -EINVAL;
+		} else {
+			ret = dev_err_probe(priv->dev, irq,
+					    "failed to get parent irq\n");
+		}
 		goto out_put_node;
 	}
 
@@ -1790,7 +1794,8 @@ static int rtl8365mb_irq_setup(struct realtek_priv *priv)
 	ret = request_threaded_irq(irq, NULL, rtl8365mb_irq, IRQF_ONESHOT,
 				   "rtl8365mb", priv);
 	if (ret) {
-		dev_err(priv->dev, "failed to request irq: %d\n", ret);
+		dev_err(priv->dev, "failed to request irq: %pe\n",
+			ERR_PTR(ret));
 		goto out_remove_irqdomain;
 	}
 
@@ -1966,14 +1971,16 @@ static int rtl8365mb_setup(struct dsa_switch *ds)
 
 	ret = rtl8365mb_reset_chip(priv);
 	if (ret) {
-		dev_err(priv->dev, "failed to reset chip: %d\n", ret);
+		dev_err(priv->dev, "failed to reset chip: %pe\n",
+			ERR_PTR(ret));
 		goto out_error;
 	}
 
 	/* Configure switch to vendor-defined initial state */
 	ret = rtl8365mb_switch_init(priv);
 	if (ret) {
-		dev_err(priv->dev, "failed to initialize switch: %d\n", ret);
+		dev_err(priv->dev, "failed to initialize switch: %pe\n",
+			ERR_PTR(ret));
 		goto out_error;
 	}
 
@@ -2091,8 +2098,8 @@ static int rtl8365mb_detect(struct realtek_priv *priv)
 
 	ret = rtl8365mb_get_chip_id_and_ver(priv->map, &chip_id, &chip_ver);
 	if (ret) {
-		dev_err(priv->dev, "failed to read chip id and version: %d\n",
-			ret);
+		dev_err(priv->dev, "failed to read chip id and version: %pe\n",
+			ERR_PTR(ret));
 		return ret;
 	}
 

-- 
2.54.0