From: Tariq Toukan <tariqt@nvidia.com>
To: Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Andrew Lunn <andrew+netdev@lunn.ch>,
"David S. Miller" <davem@davemloft.net>
Cc: Saeed Mahameed <saeedm@nvidia.com>,
Leon Romanovsky <leon@kernel.org>,
Tariq Toukan <tariqt@nvidia.com>, Mark Bloch <mbloch@nvidia.com>,
Nimrod Oren <noren@nvidia.com>, Yael Chemla <ychemla@nvidia.com>,
Shay Drory <shayd@nvidia.com>, Or Har-Toov <ohartoov@nvidia.com>,
Edward Srouji <edwards@nvidia.com>,
Maher Sanalla <msanalla@nvidia.com>,
Simon Horman <horms@kernel.org>, Parav Pandit <parav@nvidia.com>,
Patrisious Haddad <phaddad@nvidia.com>,
Kees Cook <kees@kernel.org>, Moshe Shemesh <moshe@nvidia.com>,
<linux-kernel@vger.kernel.org>, <netdev@vger.kernel.org>,
<linux-rdma@vger.kernel.org>, Gal Pressman <gal@nvidia.com>
Subject: [PATCH net-next 04/13] net/mlx5: LAG, replace peer count check with direct peer lookup
Date: Wed, 27 May 2026 15:54:18 +0300 [thread overview]
Message-ID: <20260527125427.385976-5-tariqt@nvidia.com> (raw)
In-Reply-To: <20260527125427.385976-1-tariqt@nvidia.com>
From: Shay Drory <shayd@nvidia.com>
Replace mlx5_eswitch_get_npeers() count-based check with a new
mlx5_eswitch_is_peer() function that directly verifies the peer
relationship between two eswitches.
This change prepares for SD LAG support, which is a virtual LAG that
does not have num_lag_ports capability and cannot use the count-based
peer validation.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
---
.../net/ethernet/mellanox/mlx5/core/eswitch.h | 11 ++---------
.../mellanox/mlx5/core/eswitch_offloads.c | 12 ++++++++++++
.../mellanox/mlx5/core/lag/shared_fdb.c | 17 +++++++----------
3 files changed, 21 insertions(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h
index 8a94c38f8566..94a530d19828 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h
@@ -955,6 +955,8 @@ int mlx5_eswitch_offloads_single_fdb_add_one(struct mlx5_eswitch *master_esw,
void mlx5_eswitch_offloads_single_fdb_del_one(struct mlx5_eswitch *master_esw,
struct mlx5_eswitch *slave_esw);
int mlx5_eswitch_reload_ib_reps(struct mlx5_eswitch *esw);
+bool mlx5_eswitch_is_peer(struct mlx5_eswitch *esw,
+ struct mlx5_eswitch *peer_esw);
bool mlx5_eswitch_block_encap(struct mlx5_core_dev *dev, bool from_fdb);
void mlx5_eswitch_unblock_encap(struct mlx5_core_dev *dev);
@@ -970,13 +972,6 @@ static inline int mlx5_eswitch_num_vfs(struct mlx5_eswitch *esw)
return 0;
}
-static inline int mlx5_eswitch_get_npeers(struct mlx5_eswitch *esw)
-{
- if (mlx5_esw_allowed(esw))
- return esw->num_peers;
- return 0;
-}
-
static inline struct mlx5_flow_table *
mlx5_eswitch_get_slow_fdb(struct mlx5_eswitch *esw)
{
@@ -1058,8 +1053,6 @@ static inline void
mlx5_eswitch_offloads_single_fdb_del_one(struct mlx5_eswitch *master_esw,
struct mlx5_eswitch *slave_esw) {}
-static inline int mlx5_eswitch_get_npeers(struct mlx5_eswitch *esw) { return 0; }
-
static inline int
mlx5_eswitch_reload_ib_reps(struct mlx5_eswitch *esw)
{
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
index d9683d3ea0e7..d65f30bb2f80 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -3296,6 +3296,18 @@ static int mlx5_esw_offloads_set_ns_peer(struct mlx5_eswitch *esw,
return 0;
}
+bool mlx5_eswitch_is_peer(struct mlx5_eswitch *esw,
+ struct mlx5_eswitch *peer_esw)
+{
+ u16 peer_esw_i;
+
+ if (!mlx5_esw_allowed(esw) || !mlx5_esw_allowed(peer_esw))
+ return false;
+
+ peer_esw_i = MLX5_CAP_GEN(peer_esw->dev, vhca_id);
+ return !!xa_load(&esw->paired, peer_esw_i);
+}
+
static int mlx5_esw_offloads_devcom_event(int event,
void *my_data,
void *event_data)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag/shared_fdb.c b/drivers/net/ethernet/mellanox/mlx5/core/lag/shared_fdb.c
index e5b8e9f1e6fd..b5cbe3409720 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lag/shared_fdb.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lag/shared_fdb.c
@@ -10,7 +10,7 @@
bool mlx5_lag_shared_fdb_supported(struct mlx5_lag *ldev)
{
- struct mlx5_core_dev *dev;
+ struct mlx5_core_dev *dev0, *dev;
bool ret = false;
int idx;
int i;
@@ -19,6 +19,7 @@ bool mlx5_lag_shared_fdb_supported(struct mlx5_lag *ldev)
if (idx < 0)
return false;
+ dev0 = mlx5_lag_pf(ldev, idx)->dev;
mlx5_ldev_for_each(i, 0, ldev) {
if (i == idx)
continue;
@@ -27,19 +28,15 @@ bool mlx5_lag_shared_fdb_supported(struct mlx5_lag *ldev)
mlx5_eswitch_vport_match_metadata_enabled(dev->priv.eswitch) &&
MLX5_CAP_GEN(dev, lag_native_fdb_selection) &&
MLX5_CAP_ESW(dev, root_ft_on_other_esw) &&
- mlx5_eswitch_get_npeers(dev->priv.eswitch) ==
- MLX5_CAP_GEN(dev, num_lag_ports) - 1)
+ mlx5_eswitch_is_peer(dev0->priv.eswitch, dev->priv.eswitch))
continue;
return false;
}
- dev = mlx5_lag_pf(ldev, idx)->dev;
- if (is_mdev_switchdev_mode(dev) &&
- mlx5_eswitch_vport_match_metadata_enabled(dev->priv.eswitch) &&
- mlx5_esw_offloads_devcom_is_ready(dev->priv.eswitch) &&
- MLX5_CAP_ESW(dev, esw_shared_ingress_acl) &&
- mlx5_eswitch_get_npeers(dev->priv.eswitch) ==
- MLX5_CAP_GEN(dev, num_lag_ports) - 1)
+ if (is_mdev_switchdev_mode(dev0) &&
+ mlx5_eswitch_vport_match_metadata_enabled(dev0->priv.eswitch) &&
+ mlx5_esw_offloads_devcom_is_ready(dev0->priv.eswitch) &&
+ MLX5_CAP_ESW(dev0, esw_shared_ingress_acl))
ret = true;
return ret;
--
2.44.0
next prev parent reply other threads:[~2026-05-27 12:55 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-27 12:54 [PATCH net-next 00/13] net/mlx5: Add switchdev mode support for Socket Direct single netdev, part 1/2 Tariq Toukan
2026-05-27 12:54 ` [PATCH net-next 01/13] net/mlx5: LAG, factor out shared FDB code into dedicated file Tariq Toukan
2026-05-27 12:54 ` [PATCH net-next 02/13] net/mlx5: E-Switch, align disable sequence with switchdev-to-legacy transition Tariq Toukan
2026-05-27 12:54 ` [PATCH net-next 03/13] net/mlx5: E-Switch, move devcom init from TC to eswitch layer Tariq Toukan
2026-05-28 18:48 ` Shay Drori
2026-05-27 12:54 ` Tariq Toukan [this message]
2026-05-27 12:54 ` [PATCH net-next 05/13] net/mlx5: LAG, prepare for SD device integration Tariq Toukan
2026-05-28 18:56 ` Shay Drori
2026-05-27 12:54 ` [PATCH net-next 06/13] net/mlx5: LAG, extend shared FDB API with group_id filter Tariq Toukan
2026-05-27 12:54 ` [PATCH net-next 07/13] net/mlx5: SD, introduce Socket Direct LAG Tariq Toukan
2026-05-27 12:54 ` [PATCH net-next 08/13] net/mlx5: LAG, block RoCE and VF LAG for SD devices Tariq Toukan
2026-05-27 12:54 ` [PATCH net-next 09/13] net/mlx5: LAG, block multipath " Tariq Toukan
2026-05-27 12:54 ` [PATCH net-next 10/13] net/mlx5: SD, keep netdev resources on same PF in switchdev mode Tariq Toukan
2026-05-27 12:54 ` [PATCH net-next 11/13] net/mlx5e: TC, track peer flow slots with bitmap Tariq Toukan
2026-05-27 12:54 ` [PATCH net-next 12/13] net/mlx5e: TC, enable steering for SD LAG Tariq Toukan
2026-05-27 12:54 ` [PATCH net-next 13/13] net/mlx5e: Verify unique vhca_id count instead of range Tariq Toukan
2026-05-27 22:08 ` [PATCH net-next 00/13] net/mlx5: Add switchdev mode support for Socket Direct single netdev, part 1/2 Jacob Keller
2026-05-28 9:18 ` Shay Drori
2026-05-28 17:59 ` Jacob Keller
2026-05-29 0:40 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260527125427.385976-5-tariqt@nvidia.com \
--to=tariqt@nvidia.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=edwards@nvidia.com \
--cc=gal@nvidia.com \
--cc=horms@kernel.org \
--cc=kees@kernel.org \
--cc=kuba@kernel.org \
--cc=leon@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=mbloch@nvidia.com \
--cc=moshe@nvidia.com \
--cc=msanalla@nvidia.com \
--cc=netdev@vger.kernel.org \
--cc=noren@nvidia.com \
--cc=ohartoov@nvidia.com \
--cc=pabeni@redhat.com \
--cc=parav@nvidia.com \
--cc=phaddad@nvidia.com \
--cc=saeedm@nvidia.com \
--cc=shayd@nvidia.com \
--cc=ychemla@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox