From: Simon Wunderlich <sw@simonwunderlich.de>
To: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Simon Horman <horms@kernel.org>,
b.a.t.m.a.n@lists.open-mesh.org,
Sven Eckelmann <sven@narfation.org>,
Simon Wunderlich <sw@simonwunderlich.de>
Subject: [PATCH net-next 15/15] batman-adv: use neigh_node's orig_node only as id
Date: Thu, 28 May 2026 16:29:24 +0200 [thread overview]
Message-ID: <20260528142924.329658-16-sw@simonwunderlich.de> (raw)
In-Reply-To: <20260528142924.329658-1-sw@simonwunderlich.de>
From: Sven Eckelmann <sven@narfation.org>
The orig_node member of struct batadv_neigh_node is no longer used in
B.A.T.M.A.N. IV. But batadv_neigh_node_create() is still storing it.
Only batadv_v_ogm_route_update() uses it to check if we route toward
it - not needing the data stored in the batadv_orig_node object itself,
but merely a pointer to identify the originator.
The field cannot hold a proper reference because that would create a
reference cycle, so it must never be dereferenced. Rename it to
orig_node_id and mark it __private to make any future attempt to
dereference it immediately noticeable.
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
---
net/batman-adv/bat_v_ogm.c | 2 +-
net/batman-adv/originator.c | 5 ++++-
net/batman-adv/types.h | 11 +++++++++--
3 files changed, 14 insertions(+), 4 deletions(-)
diff --git a/net/batman-adv/bat_v_ogm.c b/net/batman-adv/bat_v_ogm.c
index 2c4dca639709c..5936d0048be01 100644
--- a/net/batman-adv/bat_v_ogm.c
+++ b/net/batman-adv/bat_v_ogm.c
@@ -719,7 +719,7 @@ static bool batadv_v_ogm_route_update(struct batadv_priv *bat_priv,
* don't route towards it
*/
router = batadv_orig_router_get(orig_node, if_outgoing);
- if (router && router->orig_node != orig_node && !orig_neigh_router) {
+ if (router && ACCESS_PRIVATE(router, orig_node_id) != orig_node && !orig_neigh_router) {
batadv_dbg(BATADV_DBG_BATMAN, bat_priv,
"Drop packet: OGM via unknown neighbor!\n");
goto out;
diff --git a/net/batman-adv/originator.c b/net/batman-adv/originator.c
index d05c8240426bd..15d660ca79376 100644
--- a/net/batman-adv/originator.c
+++ b/net/batman-adv/originator.c
@@ -693,9 +693,12 @@ batadv_neigh_node_create(struct batadv_orig_node *orig_node,
kref_get(&hard_iface->refcount);
ether_addr_copy(neigh_node->addr, neigh_addr);
neigh_node->if_incoming = hard_iface;
- neigh_node->orig_node = orig_node;
neigh_node->last_seen = jiffies;
+#ifdef CONFIG_BATMAN_ADV_BATMAN_V
+ ACCESS_PRIVATE(neigh_node, orig_node_id) = orig_node;
+#endif
+
/* increment unique neighbor refcount */
kref_get(&hardif_neigh->refcount);
neigh_node->hardif_neigh = hardif_neigh;
diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h
index c3b6af399110b..1fbdd58b59bd9 100644
--- a/net/batman-adv/types.h
+++ b/net/batman-adv/types.h
@@ -663,8 +663,15 @@ struct batadv_neigh_node {
/** @list: list node for &batadv_orig_node.neigh_list */
struct hlist_node list;
- /** @orig_node: pointer to corresponding orig_node */
- struct batadv_orig_node *orig_node;
+#ifdef CONFIG_BATMAN_ADV_BATMAN_V
+ /**
+ * @orig_node_id: pointer to corresponding orig_node. It must only be used
+ * to identify the node but must NEVER be dereferenced. The reference counter
+ * was not increased when this was assigned because it would otherwise create
+ * a reference cycle.
+ */
+ struct batadv_orig_node *__private orig_node_id;
+#endif
/** @addr: the MAC address of the neighboring interface */
u8 addr[ETH_ALEN];
--
2.47.3
prev parent reply other threads:[~2026-05-28 14:29 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-28 14:29 [PATCH net-next 00/15] pull request for net-next: batman-adv 2026-05-28 Simon Wunderlich
2026-05-28 14:29 ` [PATCH net-next 01/15] batman-adv: drop batman-adv specific version Simon Wunderlich
2026-05-29 0:14 ` Jakub Kicinski
2026-05-29 7:06 ` Sven Eckelmann
2026-05-29 18:24 ` Jakub Kicinski
2026-05-29 19:23 ` Sven Eckelmann
2026-05-29 19:47 ` Jakub Kicinski
2026-05-28 14:29 ` [PATCH net-next 02/15] MAINTAINERS: Rename batman-adv T(ree) Simon Wunderlich
2026-05-28 14:29 ` [PATCH net-next 03/15] MAINTAINERS: Don't send batman-adv patches to netdev Simon Wunderlich
2026-05-28 14:29 ` [PATCH net-next 04/15] batman-adv: add missing includes Simon Wunderlich
2026-05-28 14:29 ` [PATCH net-next 05/15] batman-adv: use atomic_xchg() for gw.reselect check Simon Wunderlich
2026-05-28 14:29 ` [PATCH net-next 06/15] batman-adv: extract netdev wifi detection information object Simon Wunderlich
2026-05-28 14:29 ` [PATCH net-next 07/15] batman-adv: replace non-atomic meshif config fields with (READ|WRITE)_ONCE Simon Wunderlich
2026-05-28 14:29 ` [PATCH net-next 08/15] batman-adv: replace non-atomic hardif " Simon Wunderlich
2026-05-28 14:29 ` [PATCH net-next 09/15] batman-adv: replace non-atomic vlan " Simon Wunderlich
2026-05-28 14:29 ` [PATCH net-next 10/15] batman-adv: replace non-atomic mesh state " Simon Wunderlich
2026-05-28 14:29 ` [PATCH net-next 11/15] batman-adv: replace non-atomic packet_size_max " Simon Wunderlich
2026-05-28 14:29 ` [PATCH net-next 12/15] batman-adv: replace non-atomic last_ttvn " Simon Wunderlich
2026-05-28 14:29 ` [PATCH net-next 13/15] batman-adv: tt: replace open-coded overflow check with helper Simon Wunderlich
2026-05-28 14:29 ` [PATCH net-next 14/15] batman-adv: tvlv: avoid unnecessary OGM buffer reallocations Simon Wunderlich
2026-05-28 14:29 ` Simon Wunderlich [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260528142924.329658-16-sw@simonwunderlich.de \
--to=sw@simonwunderlich.de \
--cc=b.a.t.m.a.n@lists.open-mesh.org \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=sven@narfation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox