From: Yun Zhou <yun.zhou@windriver.com>
To: <davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
<pabeni@redhat.com>, <horms@kernel.org>
Cc: <qingfang.deng@linux.dev>, <jiri@resnulli.us>,
<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<yun.zhou@windriver.com>
Subject: [PATCH v2] flow_dissector: fix uninit-value in __skb_flow_dissect() for ETH_ADDRS
Date: Tue, 9 Jun 2026 10:37:52 +0800 [thread overview]
Message-ID: <20260609023752.1245848-1-yun.zhou@windriver.com> (raw)
__skb_flow_dissect() unconditionally reads 12 bytes from eth_hdr(skb)
when FLOW_DISSECTOR_KEY_ETH_ADDRS is requested. This assumes the skb
has a valid Ethernet header at mac_header, which is not always the case.
The problem can be triggered by:
1. Creating a TUN device in L3 mode (IFF_TUN, hard_header_len=0)
2. Attaching a multiq qdisc with a flower filter matching on eth_src
3. Sending a packet through AF_PACKET
Since TUN in L3 mode has no link-layer header, mac_header points to
the L3 data area. The flow dissector reads 12 bytes of uninitialized
skb memory, which then propagates through fl_set_masked_key() and is
used as a rhashtable lookup key in __fl_lookup(), as reported by KMSAN.
Rejecting the filter in the control path (at tc filter add time) is
not feasible because TC filter blocks can be shared between arbitrary
devices -- a filter installed on an Ethernet device may later classify
packets on a headerless device through a shared block. The device
association is not fixed at filter creation time.
Fix this in the data path by checking skb->dev->hard_header_len before
reading. If the device does not have a link-layer header large enough
to contain the Ethernet addresses, zero the key so the filter will not
match.
Reported-by: syzbot+fa2f5b1fb06147be5e16@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=fa2f5b1fb06147be5e16
Fixes: 67a900cc0436 ("flow_dissector: introduce support for Ethernet addresses")
Signed-off-by: Yun Zhou <yun.zhou@windriver.com>
---
v2:
- Adjust commit message and comment
net/core/flow_dissector.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/net/core/flow_dissector.c b/net/core/flow_dissector.c
index 2a98f5fa74eb..1e6a2c04698c 100644
--- a/net/core/flow_dissector.c
+++ b/net/core/flow_dissector.c
@@ -1173,13 +1173,20 @@ bool __skb_flow_dissect(const struct net *net,
if (dissector_uses_key(flow_dissector,
FLOW_DISSECTOR_KEY_ETH_ADDRS)) {
- struct ethhdr *eth = eth_hdr(skb);
struct flow_dissector_key_eth_addrs *key_eth_addrs;
key_eth_addrs = skb_flow_dissector_target(flow_dissector,
FLOW_DISSECTOR_KEY_ETH_ADDRS,
target_container);
- memcpy(key_eth_addrs, eth, sizeof(*key_eth_addrs));
+ /* TC filter blocks can be shared across devices with
+ * different header lengths, so we cannot validate this
+ * when the filter is installed -- check at dissect time.
+ */
+ if (skb_mac_header_was_set(skb) &&
+ skb_tail_pointer(skb) - skb_mac_header(skb) >= sizeof(*key_eth_addrs))
+ memcpy(key_eth_addrs, eth_hdr(skb), sizeof(*key_eth_addrs));
+ else
+ memset(key_eth_addrs, 0, sizeof(*key_eth_addrs));
}
if (dissector_uses_key(flow_dissector,
--
2.43.0
next reply other threads:[~2026-06-09 2:38 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-09 2:37 Yun Zhou [this message]
2026-06-12 23:28 ` [PATCH v2] flow_dissector: fix uninit-value in __skb_flow_dissect() for ETH_ADDRS Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260609023752.1245848-1-yun.zhou@windriver.com \
--to=yun.zhou@windriver.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=jiri@resnulli.us \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=qingfang.deng@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox