[PATCH] net: phy: realtek: Clear MDIO_AN_10GBT_CTRL_ADV10G bit

[Jan Klos <honza.klos@gmail.com>]

On RTL8127A connected to a link partner that advertises 10000baseT
speed cannot be changed to anything other than 10000baseT as 10GbE
is always advertised regardless of any setting. Fix this by
clearing MDIO_AN_10GBT_CTRL_ADV10G bit in rtl822x_config_aneg()'s
call to phy_modify_mmd_changed().

Signed-off-by: Jan Klos <honza.klos@gmail.com>
---
 drivers/net/phy/realtek/realtek_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/realtek/realtek_main.c b/drivers/net/phy/realtek/realtek_main.c
index 27268811f564..b65d0f5fa1a0 100644
--- a/drivers/net/phy/realtek/realtek_main.c
+++ b/drivers/net/phy/realtek/realtek_main.c
@@ -1802,7 +1802,8 @@ static int rtl822x_config_aneg(struct phy_device *phydev)
 		ret = phy_modify_mmd_changed(phydev, MDIO_MMD_VEND2,
 					     RTL_MDIO_AN_10GBT_CTRL,
 					     MDIO_AN_10GBT_CTRL_ADV2_5G |
-					     MDIO_AN_10GBT_CTRL_ADV5G, adv);
+					     MDIO_AN_10GBT_CTRL_ADV5G |
+					     MDIO_AN_10GBT_CTRL_ADV10G, adv);
 		if (ret < 0)
 			return ret;
 	}

base-commit: 7d8297e26b4e20b5d1c3c3fe51fe81a1c7fbc823
-- 
2.54.0