Netdev List
 help / color / mirror / Atom feed
From: Simon Wunderlich <sw@simonwunderlich.de>
To: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Simon Horman <horms@kernel.org>,
	b.a.t.m.a.n@lists.open-mesh.org,
	Sven Eckelmann <sven@narfation.org>,
	stable@kernel.org, Nora Schiffer <neocturne@universe-factory.net>,
	Simon Wunderlich <sw@simonwunderlich.de>
Subject: [PATCH net 01/15] batman-adv: gw: don't deselect gateway with active hardif
Date: Fri, 19 Jun 2026 09:00:31 +0200	[thread overview]
Message-ID: <20260619070045.438101-2-sw@simonwunderlich.de> (raw)
In-Reply-To: <20260619070045.438101-1-sw@simonwunderlich.de>

From: Sven Eckelmann <sven@narfation.org>

The batadv_hardif_cnt() was previously checking if there is an
batadv_hard_iface->mesh_iface which is has the same mesh_iface. And since
batadv_hardif_disable_interface() was resetting the
batadv_hard_iface->mesh_iface after this check, it had to verify whether
*1* interface was still part of the mesh_iface before it started the
gateway deselection.

But after batadv_hardif_cnt() is now checking the lower interfaces of
mesh_iface and batadv_hardif_disable_interface() already removed the
interface via netdev_upper_dev_unlink() earlier in this function, the check
must now make sure that *0* interfaces can be found by batadv_hardif_cnt()
before selected gateway must be deselected. Otherwise the deselection would
already happen one batadv_hard_iface too early.

Because a 0 hardif count from batadv_hardif_cnt() is equal to an empty
list, it is possible to replace the counting with a simple list_empty().

Cc: stable@kernel.org
Fixes: 7dc284702bcd ("batman-adv: store hard_iface as iflink private data")
Reviewed-by: Nora Schiffer <neocturne@universe-factory.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
---
 net/batman-adv/hard-interface.c | 28 ++--------------------------
 1 file changed, 2 insertions(+), 26 deletions(-)

diff --git a/net/batman-adv/hard-interface.c b/net/batman-adv/hard-interface.c
index 60cee2c2f2f41..03d01c20a9548 100644
--- a/net/batman-adv/hard-interface.c
+++ b/net/batman-adv/hard-interface.c
@@ -814,30 +814,6 @@ int batadv_hardif_enable_interface(struct batadv_hard_iface *hard_iface,
 	return ret;
 }
 
-/**
- * batadv_hardif_cnt() - get number of interfaces enslaved to mesh interface
- * @mesh_iface: mesh interface to check
- *
- * This function is only using RCU for locking - the result can therefore be
- * off when another function is modifying the list at the same time. The
- * caller can use the rtnl_lock to make sure that the count is accurate.
- *
- * Return: number of connected/enslaved hard interfaces
- */
-static size_t batadv_hardif_cnt(struct net_device *mesh_iface)
-{
-	struct batadv_hard_iface *hard_iface;
-	struct list_head *iter;
-	size_t count = 0;
-
-	rcu_read_lock();
-	netdev_for_each_lower_private_rcu(mesh_iface, hard_iface, iter)
-		count++;
-	rcu_read_unlock();
-
-	return count;
-}
-
 /**
  * batadv_hardif_disable_interface() - Remove hard interface from mesh interface
  * @hard_iface: hard interface to be removed
@@ -878,8 +854,8 @@ void batadv_hardif_disable_interface(struct batadv_hard_iface *hard_iface)
 	netdev_upper_dev_unlink(hard_iface->net_dev, hard_iface->mesh_iface);
 	batadv_hardif_recalc_extra_skbroom(hard_iface->mesh_iface);
 
-	/* nobody uses this interface anymore */
-	if (batadv_hardif_cnt(hard_iface->mesh_iface) <= 1)
+	/* nobody uses this mesh interface anymore */
+	if (list_empty(&hard_iface->mesh_iface->adj_list.lower))
 		batadv_gw_check_client_stop(bat_priv);
 
 	hard_iface->mesh_iface = NULL;
-- 
2.47.3


  reply	other threads:[~2026-06-19  7:10 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-19  7:00 [PATCH net 00/15] pull request: batman-adv 2026-06-19 Simon Wunderlich
2026-06-19  7:00 ` Simon Wunderlich [this message]
2026-06-19  7:00 ` [PATCH net 02/15] batman-adv: ensure bcast is writable before modifying TTL Simon Wunderlich
2026-06-19  7:00 ` [PATCH net 03/15] batman-adv: fix (m|b)cast csum after decrementing TTL Simon Wunderlich
2026-06-19  7:00 ` [PATCH net 04/15] batman-adv: frag: ensure fragment is writable before modifying TTL Simon Wunderlich
2026-06-19  7:00 ` [PATCH net 05/15] batman-adv: frag: avoid underflow of TTL Simon Wunderlich
2026-06-19  7:00 ` [PATCH net 06/15] batman-adv: v: prevent OGM aggregation on disabled hardif Simon Wunderlich
2026-06-19  7:00 ` [PATCH net 07/15] batman-adv: tp_meter: restrict number of unacked list entries Simon Wunderlich
2026-06-19  7:00 ` [PATCH net 08/15] batman-adv: tp_meter: annotate last_recv_time access with READ/WRITE_ONCE Simon Wunderlich
2026-06-19  7:00 ` [PATCH net 09/15] batman-adv: tp_meter: prevent parallel modifications of last_recv Simon Wunderlich
2026-06-19  7:00 ` [PATCH net 10/15] batman-adv: tp_meter: handle overlapping packets Simon Wunderlich
2026-06-19  7:00 ` [PATCH net 11/15] batman-adv: tt: don't merge change entries with different VIDs Simon Wunderlich
2026-06-19  7:00 ` [PATCH net 12/15] batman-adv: tt: track roam count per VID Simon Wunderlich
2026-06-19  7:00 ` [PATCH net 13/15] batman-adv: dat: prevent false sharing between VLANs Simon Wunderlich
2026-06-19  7:00 ` [PATCH net 14/15] batman-adv: tvlv: enforce 2-byte alignment Simon Wunderlich
2026-06-19  7:00 ` [PATCH net 15/15] batman-adv: tvlv: avoid race of cifsnotfound handler state Simon Wunderlich

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260619070045.438101-2-sw@simonwunderlich.de \
    --to=sw@simonwunderlich.de \
    --cc=b.a.t.m.a.n@lists.open-mesh.org \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=horms@kernel.org \
    --cc=kuba@kernel.org \
    --cc=neocturne@universe-factory.net \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=stable@kernel.org \
    --cc=sven@narfation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox