[PATCH net V2] net: phy: motorcomm: read EEE abilities in yt8521_get_features()

[xiaoning.wang@oss.nxp.com]

From: Clark Wang <xiaoning.wang@nxp.com>

In phy_probe(), genphy_c45_read_eee_abilities() is only called when a
driver uses phydrv->features. Drivers that implement .get_features are
responsible for reading the EEE abilities themselves.

yt8521_get_features() does not do this, so phydev->supported_eee stays
empty for YT8521/YT8531S and "ethtool --show-eee" reports "EEE status:
not supported", even though the PHY has the standard EEE capability
registers.

Call genphy_c45_read_eee_abilities() at the end of yt8521_get_features()
to populate supported_eee.

Fixes: 70479a40954c ("net: phy: Add driver for Motorcomm yt8521 gigabit ethernet phy")
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
---
V2 change:
 - Since both the YT8521 and YT8531s, which call the yt8521_get_features(),
   support EEE, if genphy_c45_read_eee_abilities() returns an error, it
   indicates a problem with MDIO bus, and the error should be returned
   accordingly.
---
 drivers/net/phy/motorcomm.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c
index 5071605a1a11..73b5da937d7f 100644
--- a/drivers/net/phy/motorcomm.c
+++ b/drivers/net/phy/motorcomm.c
@@ -2490,7 +2490,8 @@ static int yt8521_get_features(struct phy_device *phydev)
 		/* add fiber's features to phydev->supported */
 		yt8521_prepare_fiber_features(phydev, phydev->supported);
 	}
-	return ret;
+
+	return ret ? ret : genphy_c45_read_eee_abilities(phydev);
 }
 
 /**
-- 
2.34.1