[PATCH net-next v2 2/2] net: stmmac: dwmac-rk: enable the reference clock for output mode

[Jiaxing Hu <gahing@gahingwoo.com>]

rk_gmac_clk_init() only requests the refout clock group for RMII. The
ArmSoM CM5 has an on-module YT8531 RGMII PHY with no crystal that needs
the SoC 25 MHz reference (clk_mac_refout), so in RGMII the clock was
never enabled and the PHY did not respond on MDIO.

Request the group whenever the SoC drives the clock (clock_in_out =
"output"), not just for RMII. The clocks are optional, so other boards
are unaffected.

Signed-off-by: Jiaxing Hu <gahing@gahingwoo.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index 8d7042e68..dd060e4b8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -1112,7 +1112,7 @@ static int rk_gmac_clk_init(struct plat_stmmacenet_data *plat)
 	bsp_priv->clk_enabled = false;
 
 	bsp_priv->num_clks = ARRAY_SIZE(rk_clocks);
-	if (phy_iface == PHY_INTERFACE_MODE_RMII)
+	if (phy_iface == PHY_INTERFACE_MODE_RMII || !bsp_priv->clock_input)
 		bsp_priv->num_clks += ARRAY_SIZE(rk_rmii_clocks);
 
 	bsp_priv->clks = devm_kcalloc(dev, bsp_priv->num_clks,
@@ -1123,7 +1123,7 @@ static int rk_gmac_clk_init(struct plat_stmmacenet_data *plat)
 	for (i = 0; i < ARRAY_SIZE(rk_clocks); i++)
 		bsp_priv->clks[i].id = rk_clocks[i];
 
-	if (phy_iface == PHY_INTERFACE_MODE_RMII) {
+	if (phy_iface == PHY_INTERFACE_MODE_RMII || !bsp_priv->clock_input) {
 		for (j = 0; j < ARRAY_SIZE(rk_rmii_clocks); j++)
 			bsp_priv->clks[i++].id = rk_rmii_clocks[j];
 	}
-- 
2.43.0