[PATCH net V3] net: phy: motorcomm: read EEE abilities in yt8521_get_features()

[xiaoning.wang@oss.nxp.com]

From: Clark Wang <xiaoning.wang@nxp.com>

In phy_probe(), genphy_c45_read_eee_abilities() is only called when a
driver uses phydrv->features. Drivers that implement .get_features are
responsible for reading the EEE abilities themselves.

yt8521_get_features() does not do this, so phydev->supported_eee stays
empty for YT8521/YT8531S and "ethtool --show-eee" reports "EEE status:
not supported", even though the PHY has the standard EEE capability
registers.

Call genphy_c45_read_eee_abilities() at the end of yt8521_get_features()
to populate supported_eee.

Fixes: 70479a40954c ("net: phy: Add driver for Motorcomm yt8521 gigabit ethernet phy")
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
---
V3 changes:
- Replace the uncommon "ret ? : ..." expression with the usual
  check, and move the check right after the first yt8521_get_features_paged()
  call, which was the only path missing it.
- Collect Reviewed tag from Breno.

V2 changes:
- Return the value from genphy_c45_read_eee_abilities.
---
 drivers/net/phy/motorcomm.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c
index 5071605a1a11..6b710c02264e 100644
--- a/drivers/net/phy/motorcomm.c
+++ b/drivers/net/phy/motorcomm.c
@@ -2481,6 +2481,8 @@ static int yt8521_get_features(struct phy_device *phydev)
 
 	if (priv->reg_page != YT8521_RSSR_TO_BE_ARBITRATED) {
 		ret = yt8521_get_features_paged(phydev, priv->reg_page);
+		if (ret < 0)
+			return ret;
 	} else {
 		ret = yt8521_get_features_paged(phydev,
 						YT8521_RSSR_UTP_SPACE);
@@ -2490,7 +2492,8 @@ static int yt8521_get_features(struct phy_device *phydev)
 		/* add fiber's features to phydev->supported */
 		yt8521_prepare_fiber_features(phydev, phydev->supported);
 	}
-	return ret;
+
+	return genphy_c45_read_eee_abilities(phydev);
 }
 
 /**
-- 
2.43.0