From: Marc Kleine-Budde <mkl@pengutronix.de>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, kuba@kernel.org, linux-can@vger.kernel.org,
kernel@pengutronix.de, James Gao <jamesgao5@outlook.com>,
Vincent Mailhol <mailhol@kernel.org>,
stable@kernel.org, Marc Kleine-Budde <mkl@pengutronix.de>
Subject: [PATCH net 10/20] can: peak_usb: add bounds check for USB channel index
Date: Wed, 29 Jul 2026 12:12:50 +0200 [thread overview]
Message-ID: <20260729102802.505168-11-mkl@pengutronix.de> (raw)
In-Reply-To: <20260729102802.505168-1-mkl@pengutronix.de>
From: James Gao <jamesgao5@outlook.com>
The channel control index ctrl_idx is derived from rx->len which comes
directly from a device USB payload. The mask 0x0f allows values 0-15, but
the array size of usb_if->dev[] is only 2. Values 2-15 cause heap
out-of-bounds read, eventually causing kernel panic in the IRQ context.
Add bounds checking for ctrl_idx before the array access in both
pcan_usb_pro_handle_canmsg() and pcan_usb_pro_handle_error().
Fixes: d8a199355f8f ("can: usb: PEAK-System Technik PCAN-USB Pro specific part")
Signed-off-by: James Gao <jamesgao5@outlook.com>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/TYWPR01MB8559DBAAAA6A7F410400329CF0012@TYWPR01MB8559.jpnprd01.prod.outlook.com
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
drivers/net/can/usb/peak_usb/pcan_usb_pro.c | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
index aefcded8e12a..b6be8c19e537 100644
--- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c
@@ -534,12 +534,18 @@ static int pcan_usb_pro_handle_canmsg(struct pcan_usb_pro_interface *usb_if,
struct pcan_usb_pro_rxmsg *rx)
{
const unsigned int ctrl_idx = (rx->len >> 4) & 0x0f;
- struct peak_usb_device *dev = usb_if->dev[ctrl_idx];
- struct net_device *netdev = dev->netdev;
+ struct peak_usb_device *dev;
+ struct net_device *netdev;
struct can_frame *can_frame;
struct sk_buff *skb;
struct skb_shared_hwtstamps *hwts;
+ if (ctrl_idx >= ARRAY_SIZE(usb_if->dev))
+ return -EINVAL;
+
+ dev = usb_if->dev[ctrl_idx];
+ netdev = dev->netdev;
+
skb = alloc_can_skb(netdev, &can_frame);
if (!skb)
return -ENOMEM;
@@ -573,14 +579,20 @@ static int pcan_usb_pro_handle_error(struct pcan_usb_pro_interface *usb_if,
{
const u16 raw_status = le16_to_cpu(er->status);
const unsigned int ctrl_idx = (er->channel >> 4) & 0x0f;
- struct peak_usb_device *dev = usb_if->dev[ctrl_idx];
- struct net_device *netdev = dev->netdev;
+ struct peak_usb_device *dev;
+ struct net_device *netdev;
struct can_frame *can_frame;
enum can_state new_state = CAN_STATE_ERROR_ACTIVE;
u8 err_mask = 0;
struct sk_buff *skb;
struct skb_shared_hwtstamps *hwts;
+ if (ctrl_idx >= ARRAY_SIZE(usb_if->dev))
+ return -EINVAL;
+
+ dev = usb_if->dev[ctrl_idx];
+ netdev = dev->netdev;
+
/* nothing should be sent while in BUS_OFF state */
if (dev->can.state == CAN_STATE_BUS_OFF)
return 0;
--
2.53.0
next prev parent reply other threads:[~2026-07-29 10:29 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-29 10:12 [PATCH net 0/20] pull-request: can 2026-07-29 Marc Kleine-Budde
2026-07-29 10:12 ` [PATCH net 01/20] can: j1939: use netdevice_tracker for j1939_{priv,session,ecu} tracking Marc Kleine-Budde
2026-07-29 10:12 ` [PATCH net 02/20] can: j1939: transport: j1939_session_fresh_new(): initialize receive buffer Marc Kleine-Budde
2026-07-29 10:12 ` [PATCH net 03/20] can: isotp: fix timer drain order, wakeup handling and tx_gen ordering Marc Kleine-Budde
2026-07-29 10:12 ` [PATCH net 04/20] can: isotp: check register_netdevice_notifier() error in module init Marc Kleine-Budde
2026-07-29 10:12 ` [PATCH net 05/20] can: ctucanfd: unmap BAR0 using base address Marc Kleine-Budde
2026-07-29 10:12 ` [PATCH net 06/20] can: ctucanfd: mark error-active controller status valid Marc Kleine-Budde
2026-07-29 10:12 ` [PATCH net 07/20] can: ctucanfd: handle bus error interrupts Marc Kleine-Budde
2026-07-29 10:12 ` [PATCH net 08/20] can: ctucanfd: use self-test mode for PRESUME_ACK Marc Kleine-Budde
2026-07-29 10:12 ` [PATCH net 09/20] can: ctucanfd: add missing MODULE_DEVICE_TABLE() Marc Kleine-Budde
2026-07-29 10:12 ` Marc Kleine-Budde [this message]
2026-07-29 10:12 ` [PATCH net 11/20] can: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error Marc Kleine-Budde
2026-07-29 10:12 ` [PATCH net 12/20] can: peak_usb: validate uCAN receive record lengths Marc Kleine-Budde
2026-07-29 10:12 ` [PATCH net 13/20] can: kvaser_usb: kvaser_usb_hydra_get_busparams(): fix memory leak in kvaser_usb_hydra_get_busparams() Marc Kleine-Budde
2026-07-29 10:12 ` [PATCH net 14/20] can: kvaser_usb_leaf: kvaser_usb_leaf_wait_cmd(): validate received command extents Marc Kleine-Budde
2026-07-29 10:12 ` [PATCH net 15/20] can: rcar_canfd: change the initializing flow for clocks and resets Marc Kleine-Budde
2026-07-29 10:12 ` [PATCH net 16/20] can: softing: fw_parse(): validate firmware record spans Marc Kleine-Budde
2026-07-29 10:12 ` [PATCH net 17/20] can: c_can: c_can_chip_config(): keep controller in init mode until bittiming is configured Marc Kleine-Budde
2026-07-29 10:12 ` [PATCH net 18/20] can: gs_usb: gs_usb_receive_bulk_callback(): resubmit URB on skb allocation failure Marc Kleine-Budde
2026-07-29 10:12 ` [PATCH net 19/20] can: etas_es58x: es58x_read_bulk_callback(): fix RX buffer leak on URB resubmit failure Marc Kleine-Budde
2026-07-29 10:13 ` [PATCH net 20/20] can: ems_usb: validate CPC message lengths Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260729102802.505168-11-mkl@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=davem@davemloft.net \
--cc=jamesgao5@outlook.com \
--cc=kernel@pengutronix.de \
--cc=kuba@kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=mailhol@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=stable@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox