Netdev List
 help / color / mirror / Atom feed
From: Chengfeng Ye <nicoyip.dev@gmail.com>
To: David Ahern <dsahern@kernel.org>,
	Ido Schimmel <idosch@nvidia.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Simon Horman <horms@kernel.org>,
	Stefano Brivio <sbrivio@redhat.com>,
	Sabrina Dubroca <sd@queasysnail.net>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	Chengfeng Ye <nicoyip.dev@gmail.com>,
	stable@vger.kernel.org
Subject: [PATCH net] ipv4: fix use-after-free in fib_nhc_update_mtu()
Date: Sat,  1 Aug 2026 00:29:38 +0800	[thread overview]
Message-ID: <20260731162938.3388534-1-nicoyip.dev@gmail.com> (raw)

fib_nhc_update_mtu() walks the nexthop exception table under RTNL, but
RTNL does not serialize this walk with PMTU exception updates. The walk
uses rcu_dereference_protected() with a constant true condition without
holding either fnhe_lock or an RCU read-side critical section.

The following interleaving can therefore occur:

  CPU 0                              CPU 1
  fib_nhc_update_mtu()               update_or_create_fnhe()
    load fnhe                          spin_lock_bh(&fnhe_lock)
                                       fnhe_remove_oldest()
                                         unlink fnhe
                                         kfree_rcu(fnhe, rcu)
    <quiescent state>
    access fnhe after grace period

KASAN reported:

  BUG: KASAN: slab-use-after-free in fib_nhc_update_mtu+0x3df/0x410
  Read of size 8 at addr ffff888107d49000 by task poc/90
  Call Trace:
   fib_nhc_update_mtu+0x3df/0x410
   fib_sync_mtu+0x7a/0xd0
   fib_netdev_event+0x229/0x3f0
   netif_set_mtu_ext+0x33a/0x570
   dev_set_mtu+0x88/0x120
  Allocated by task 89:
   update_or_create_fnhe+0xa80/0x1110
   __ip_rt_update_pmtu+0x8f2/0xcd0
   ipv4_sk_update_pmtu+0x49e/0x690
   udp_err+0xd92/0x1080
  Freed by task 0:
   __kasan_slab_free+0x43/0x70
   kvfree_rcu_cb+0x12f/0x420
   rcu_core+0x509/0x18e0

Protect the full walk with rcu_read_lock() and use rcu_dereference()
for the RCU-published pointers. This prevents reclaim from completing
until all references held by the walk have been dropped, without
serializing PMTU updates against the entire hash-table traversal.

Fixes: af7d6cce5369 ("net: ipv4: update fnhe_pmtu when first hop's MTU changes")
Cc: stable@vger.kernel.org
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
---
 net/ipv4/fib_semantics.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c
index 4f3c0740dde9..6ecc6654427c 100644
--- a/net/ipv4/fib_semantics.c
+++ b/net/ipv4/fib_semantics.c
@@ -1879,16 +1879,17 @@ void fib_nhc_update_mtu(struct fib_nh_common *nhc, u32 new, u32 orig)
 	struct fnhe_hash_bucket *bucket;
 	int i;
 
-	bucket = rcu_dereference_protected(nhc->nhc_exceptions, 1);
+	rcu_read_lock();
+	bucket = rcu_dereference(nhc->nhc_exceptions);
 	if (!bucket)
-		return;
+		goto out;
 
 	for (i = 0; i < FNHE_HASH_SIZE; i++) {
 		struct fib_nh_exception *fnhe;
 
-		for (fnhe = rcu_dereference_protected(bucket[i].chain, 1);
+		for (fnhe = rcu_dereference(bucket[i].chain);
 		     fnhe;
-		     fnhe = rcu_dereference_protected(fnhe->fnhe_next, 1)) {
+		     fnhe = rcu_dereference(fnhe->fnhe_next)) {
 			if (fnhe->fnhe_mtu_locked) {
 				if (new <= fnhe->fnhe_pmtu) {
 					fnhe->fnhe_pmtu = new;
@@ -1900,6 +1901,8 @@ void fib_nhc_update_mtu(struct fib_nh_common *nhc, u32 new, u32 orig)
 			}
 		}
 	}
+out:
+	rcu_read_unlock();
 }
 
 void fib_sync_mtu(struct net_device *dev, u32 orig_mtu)
-- 
2.43.0


                 reply	other threads:[~2026-07-31 16:30 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260731162938.3388534-1-nicoyip.dev@gmail.com \
    --to=nicoyip.dev@gmail.com \
    --cc=davem@davemloft.net \
    --cc=dsahern@kernel.org \
    --cc=edumazet@google.com \
    --cc=horms@kernel.org \
    --cc=idosch@nvidia.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=sbrivio@redhat.com \
    --cc=sd@queasysnail.net \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox