From: Chuck Lever <cel@kernel.org>
To: Trond Myklebust <trondmy@kernel.org>,
Anna Schumaker <anna@kernel.org>, Chuck Lever <cel@kernel.org>,
Jeff Layton <jlayton@kernel.org>, NeilBrown <neil@brown.name>,
Olga Kornievskaia <okorniev@redhat.com>,
Dai Ngo <Dai.Ngo@oracle.com>, Tom Talpey <tom@talpey.com>
Cc: linux-nfs@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH 1/8] SUNRPC: treat every TLS error alert as fatal
Date: Wed, 05 Aug 2026 14:30:52 -0400 [thread overview]
Message-ID: <20260805-svcsock-cmsg-fixes-v1-1-43514a32da9b@kernel.org> (raw)
In-Reply-To: <20260805-svcsock-cmsg-fixes-v1-0-43514a32da9b@kernel.org>
svc_tcp_sock_process_cmsg() decides whether an alert ends the session
by reading the alert's level octet. RFC 8446 Section 6 retired that
field. The severity is implicit in the description, and a receiver
treats every alert listed in Section 6.2 as an error alert
"regardless of the AlertLevel in the message". A peer that aborts
with unexpected_message but leaves the legacy octet set to warning
makes the server return -EAGAIN. svc_tcp_recvfrom() then leaves a
dead TLS session attached to an open transport. NFSD keeps polling
it.
Decide from the alert description instead. close_notify and
user_canceled are the closure alerts (RFC 8446 Section 6.1). Every
other description ends the session, including one this kernel does
not recognize.
Fixes: 39067dda1d86 ("SUNRPC: Use new helpers to handle TLS Alerts")
Signed-off-by: Chuck Lever <cel@kernel.org>
---
net/sunrpc/svcsock.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c
index 50e5e7f5b762..95146e5eb934 100644
--- a/net/sunrpc/svcsock.c
+++ b/net/sunrpc/svcsock.c
@@ -257,8 +257,18 @@ svc_tcp_sock_process_cmsg(struct socket *sock, struct msghdr *msg,
break;
case TLS_RECORD_TYPE_ALERT:
tls_alert_recv(sock->sk, msg, &level, &description);
- ret = (level == TLS_ALERT_LEVEL_FATAL) ?
- -ENOTCONN : -EAGAIN;
+ /* RFC 8446 Section 6: every alert but a closure alert is
+ * an error alert, whatever the legacy AlertLevel octet
+ * says.
+ */
+ switch (description) {
+ case TLS_ALERT_DESC_CLOSE_NOTIFY:
+ case TLS_ALERT_DESC_USER_CANCELED:
+ ret = -EAGAIN;
+ break;
+ default:
+ ret = -ENOTCONN;
+ }
break;
default:
/* discard this record type */
--
2.54.0
next prev parent reply other threads:[~2026-08-05 18:31 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-05 18:30 [PATCH 0/8] SUNRPC: Fix TLS control record handling Chuck Lever
2026-08-05 18:30 ` Chuck Lever [this message]
2026-08-05 18:30 ` [PATCH 2/8] SUNRPC: do not credit control-record octets to the RPC stream Chuck Lever
2026-08-05 18:30 ` [PATCH 3/8] SUNRPC: reject a TLS alert record that is not two octets Chuck Lever
2026-08-05 18:30 ` [PATCH 4/8] SUNRPC: resume receiving after a TLS control record Chuck Lever
2026-08-05 18:30 ` [PATCH 5/8] SUNRPC: fold svc_tcp_sock_process_cmsg() into its only caller Chuck Lever
2026-08-05 18:30 ` [PATCH 6/8] SUNRPC: treat every client-side TLS error alert as fatal Chuck Lever
2026-08-05 18:30 ` [PATCH 7/8] SUNRPC: reject a client-side TLS alert record that is not two octets Chuck Lever
2026-08-05 18:30 ` [PATCH 8/8] SUNRPC: fold xs_sock_process_cmsg() into its only caller Chuck Lever
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260805-svcsock-cmsg-fixes-v1-1-43514a32da9b@kernel.org \
--to=cel@kernel.org \
--cc=Dai.Ngo@oracle.com \
--cc=anna@kernel.org \
--cc=jlayton@kernel.org \
--cc=linux-nfs@vger.kernel.org \
--cc=neil@brown.name \
--cc=netdev@vger.kernel.org \
--cc=okorniev@redhat.com \
--cc=tom@talpey.com \
--cc=trondmy@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox