From: Jijie Shao <shaojijie@huawei.com>
To: <davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
<pabeni@redhat.com>, <andrew+netdev@lunn.ch>, <horms@kernel.org>
Cc: <shenjian15@huawei.com>, <liuyonglong@huawei.com>,
<chenhao418@huawei.com>, <yangshuaisong@h-partners.com>,
<ningwei15@huawei.com>, <netdev@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <shaojijie@huawei.com>
Subject: [PATCH v2 net-next 3/3] net: hns3: use txqueue parameter directly in ndo_tx_timeout
Date: Fri, 7 Aug 2026 17:54:35 +0800 [thread overview]
Message-ID: <20260807095435.2959246-4-shaojijie@huawei.com> (raw)
In-Reply-To: <20260807095435.2959246-1-shaojijie@huawei.com>
From: Jian Shen <shenjian15@huawei.com>
The ndo_tx_timeout callback already provides the timed out txqueue
index. Use it directly instead of iterating all tx queues to find
the timed out one.
Use h->kinfo.num_tqps for the bounds check instead of
ndev->num_tx_queues, as the ring array is allocated with num_tqps
entries and num_tx_queues may be larger. This issue has not been
encountered in practice, so it is folded into this cleanup rather
than tracked as a separate bugfix.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
---
Changes in v2:
- Use h->kinfo.num_tqps for bounds check instead of
ndev->num_tx_queues
- Restore the netif_xmit_timeout_ms() check by making
hns3_dump_timeout_queue() return bool and gating on
its return value, so a cleared stall does not trigger
a reset
- Fold the bounds fix into this patch rather than tracking
it as a separate bugfix, as the OOB has not been
encountered in practice
v1: https://lore.kernel.org/all/20260804130933.880552-1-shaojijie@huawei.com/
---
.../net/ethernet/hisilicon/hns3/hns3_enet.c | 48 +++++++++----------
1 file changed, 22 insertions(+), 26 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index 6ecb32e28e79..47788be64be6 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -2825,32 +2825,28 @@ static int hns3_nic_change_mtu(struct net_device *netdev, int new_mtu)
return ret;
}
-static int hns3_get_timeout_queue(struct net_device *ndev)
+static bool hns3_dump_timeout_queue(struct net_device *ndev,
+ unsigned int txqueue)
{
- unsigned int i;
-
- /* Find the stopped queue the same way the stack does */
- for (i = 0; i < ndev->num_tx_queues; i++) {
- unsigned int timedout_ms;
- struct netdev_queue *q;
+ unsigned int timedout_ms;
+ struct netdev_queue *q;
- q = netdev_get_tx_queue(ndev, i);
- timedout_ms = netif_xmit_timeout_ms(q);
- if (timedout_ms) {
+ q = netdev_get_tx_queue(ndev, txqueue);
+ timedout_ms = netif_xmit_timeout_ms(q);
+ if (timedout_ms) {
#ifdef CONFIG_BQL
- struct dql *dql = &q->dql;
+ struct dql *dql = &q->dql;
- netdev_info(ndev, "DQL info last_cnt: %u, queued: %u, adj_limit: %u, completed: %u\n",
- dql->last_obj_cnt, dql->num_queued,
- dql->adj_limit, dql->num_completed);
+ netdev_info(ndev, "DQL info last_cnt: %u, queued: %u, adj_limit: %u, completed: %u\n",
+ dql->last_obj_cnt, dql->num_queued,
+ dql->adj_limit, dql->num_completed);
#endif
- netdev_info(ndev, "queue state: 0x%lx, delta msecs: %u\n",
- q->state, timedout_ms);
- break;
- }
+ netdev_info(ndev, "queue state: 0x%lx, delta msecs: %u\n",
+ q->state, timedout_ms);
+ return true;
}
- return i;
+ return false;
}
static void hns3_dump_queue_stats(struct net_device *ndev,
@@ -2900,15 +2896,15 @@ static void hns3_dump_queue_reg(struct net_device *ndev,
HNS3_RING_TX_RING_EBD_OFFSET_REG));
}
-static bool hns3_get_tx_timeo_queue_info(struct net_device *ndev)
+static bool hns3_get_tx_timeo_queue_info(struct net_device *ndev,
+ unsigned int txqueue)
{
struct hns3_nic_priv *priv = netdev_priv(ndev);
struct hnae3_handle *h = hns3_get_handle(ndev);
struct hns3_enet_ring *tx_ring;
- u32 timeout_queue;
- timeout_queue = hns3_get_timeout_queue(ndev);
- if (timeout_queue >= ndev->num_tx_queues) {
+ if (txqueue >= h->kinfo.num_tqps ||
+ !hns3_dump_timeout_queue(ndev, txqueue)) {
netdev_info(ndev,
"no netdev TX timeout queue found, timeout count: %llu\n",
priv->tx_timeout_count);
@@ -2917,8 +2913,8 @@ static bool hns3_get_tx_timeo_queue_info(struct net_device *ndev)
priv->tx_timeout_count++;
- tx_ring = &priv->ring[timeout_queue];
- hns3_dump_queue_stats(ndev, tx_ring, timeout_queue);
+ tx_ring = &priv->ring[txqueue];
+ hns3_dump_queue_stats(ndev, tx_ring, txqueue);
/* When mac received many pause frames continuous, it's unable to send
* packets, which may cause tx timeout
@@ -2941,7 +2937,7 @@ static void hns3_nic_net_timeout(struct net_device *ndev, unsigned int txqueue)
struct hns3_nic_priv *priv = netdev_priv(ndev);
struct hnae3_handle *h = priv->ae_handle;
- if (!hns3_get_tx_timeo_queue_info(ndev))
+ if (!hns3_get_tx_timeo_queue_info(ndev, txqueue))
return;
/* request the reset, and let the hclge to determine
--
2.33.0
next prev parent reply other threads:[~2026-08-07 9:55 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-07 9:54 [PATCH v2 net-next 0/3] net: hns3: some cleanups for hns3 driver Jijie Shao
2026-08-07 9:54 ` [PATCH v2 net-next 1/3] net: hns3: set msg->desc to NULL after kfree in hclge_query_reg_info() Jijie Shao
2026-08-07 9:54 ` [PATCH v2 net-next 2/3] net: hns3: add missing const qualifier to hclge_log_error() reg parameter Jijie Shao
2026-08-07 9:54 ` Jijie Shao [this message]
2026-08-10 16:45 ` [PATCH v2 net-next 3/3] net: hns3: use txqueue parameter directly in ndo_tx_timeout Simon Horman
2026-08-11 14:10 ` [PATCH v2 net-next 0/3] net: hns3: some cleanups for hns3 driver patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260807095435.2959246-4-shaojijie@huawei.com \
--to=shaojijie@huawei.com \
--cc=andrew+netdev@lunn.ch \
--cc=chenhao418@huawei.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=liuyonglong@huawei.com \
--cc=netdev@vger.kernel.org \
--cc=ningwei15@huawei.com \
--cc=pabeni@redhat.com \
--cc=shenjian15@huawei.com \
--cc=yangshuaisong@h-partners.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox