From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-wr1-f54.google.com (mail-wr1-f54.google.com [209.85.221.54]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id F2AC63A3E97 for ; Sun, 9 Aug 2026 11:23:09 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.221.54 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1786274592; cv=none; b=oN555iACWcr29E5/H4eVCpP+g2QwjkGMk+mRIJ6tbNII0d8UXU9vRJ9VSc0F/RcOg0trQE1TD0OcbZ0osGSUcxQazU62QrnGDrhJyh4Fqs/JenMchDxKRUhPN7gQsHzLDVJSmyrsXXzGMQJjuhhVkTmzVh+WVhMzdmGOoKuoRoc= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1786274592; c=relaxed/simple; bh=u7ppirKfLU4ZVz/nEOJZj7e8SzDZbS0KCbHmJCtYC4g=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=cM+doyTd95mNOXHP8tf8TV9gNLHohLlk3qKcTpvn2J/bEMSAnlE53UIE6QggQSn4EELltvn2KzKdsQT+1oHcMYBgPYED/xkE7Trd/Tpn5End+Yhkfc/GmNyGIjrtecXcPWusCBH9imU7jvJrFfFc4VqTtf1rQ/2kqO1+4B+CmLo= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=Cu/EIFKc; arc=none smtp.client-ip=209.85.221.54 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="Cu/EIFKc" Received: by mail-wr1-f54.google.com with SMTP id ffacd0b85a97d-476a130c138so925989f8f.0 for ; Sun, 09 Aug 2026 04:23:09 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20251104; t=1786274588; x=1786879388; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to:content-type; bh=QonosjSsHGuiSY52r6oXtU1gWhClDfkzKprjwVtzsIY=; b=Cu/EIFKco4AS+82/1qrcY9oMb1iUUprFlpISYhrDdXABV0J4obqiLtb7t11S00jqe8 Hx9xRVDpG5fSPU7ws7W/Vi046czOFBrlG0awyhB0f4nfDAHXQ0RSvy+l4lNvVg6YiwV4 Uh49IpgoLDCeDD6IpGp7CRYkQn3NmnbTBKDXMfEKosj0u67tszyfO7pM00P0fKxIMtHR pVM9mZhGH6lAEBRPesjY3B4Bii8sYKSsXx1r/3O0/fjRGoKni+uFuILsw5XYjfH262uC vtSyTivdhxVilHt74Wxt7M5vBUFhEx6EnQ/rqzrFbNVqTMqQ7cBRaaJbO9jTC/aZxnTF gzBQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20251104; t=1786274588; x=1786879388; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-gg:x-gm-message-state:from :to:cc:subject:date:message-id:reply-to:content-type; bh=QonosjSsHGuiSY52r6oXtU1gWhClDfkzKprjwVtzsIY=; b=pXYVIecp3ItZDWK6FJ5nGiKgPDqC7PGSLwZlNwoY4+1LO8jTNtyimgxVwW1+IPNTZY Pr7kQU3FgRoo3p+A/nspY4vJDOEwGQ7dtWDYt/QXYWNRigX4hzifbAENO+XKwvQ5FY57 dK25z/oWVlqTQa56soP444EAbjg9NUO3vjxMAjPKrG7bclbmO8EfsXWujQol/Bx66bfk ebUCJZVJYlIhGfhaSPJhxb7/7R4aRatq4cBNLgA96WpQcDAHClS3erVCYSS2HfEP/mbR BTlpLq3fVvFwLyojyuz/Qa6qpHiNpFBSAdiNpWvqzqqfGdfA4/VlOnCke1Liacx0hjrJ 1o9w== X-Gm-Message-State: AOJu0YzDU0UrFFq2mxuM2fRw/QxC1QZEjBop9/CR/FSotOQxXrA7iJ7y HI6X4KP78uOV5JM9ZE9OX86g9hKdQAbfGmUOuE3ush8sTFmu3OJwWkfa X-Gm-Gg: AR+sD12EXLfGfTe7ZgtVAu+lNe+O3qgSdjRBZD1LsQO1yXm48yzkG6wevvS/zr5Ldfn Vcf8PPJ4VD8kXfpOTExlppHHy12+iIYd6OLILpFanSx6/FTYPWQA/1/50YueBVyhVVafflmb6qE vIPKqE2Bdpd9WbMEpUi2kOaqduOFBhu7b5ZaqWIZkfl9/ekiIJDCaJPaFdiieCe4VRh6biMd91c 3U+wwQzDEfOvPOd7oxJScKUQd7ywd9U+z+kEg8SzWLyIT5HGwgrJJ806WrvWaNLl7iTwwSwrGdh PT4uMGgeA4qDa3FXpeLj7Rbu/xjgHctsEymsex6ia4WwDJosjnuJzW7hOzUe9SeIZc2nkGlBjt5 4ubXftR7tAyWzlX21673RxZIW3gOVNHSexxHunoNsH3OR9zD8enx1Vzl03wqyewLv6XChQa15Kj BwuA3xaM9JlFiEu0zbMDHhvo6YOxawTbMdcnHdSU+b7kBuINpWbJNSEzyhs4ageFw= X-Received: by 2002:a05:6000:46d4:b0:47f:34ba:2d0d with SMTP id ffacd0b85a97d-47ffd21d9f3mr22800589f8f.8.1786274588178; Sun, 09 Aug 2026 04:23:08 -0700 (PDT) Received: from builder ([2001:9e8:f105:3c16:be24:11ff:fe30:5d85]) by smtp.gmail.com with ESMTPSA id ffacd0b85a97d-480021f9182sm23156775f8f.28.2026.08.09.04.23.07 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sun, 09 Aug 2026 04:23:07 -0700 (PDT) From: Jonas Jelonek To: Oleksij Rempel , Kory Maincent , Andrew Lunn , "David S . Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Daniel Golle , =?UTF-8?q?Bj=C3=B8rn=20Mork?= , Sander Vanheule , Jonas Jelonek Subject: [PATCH net-next v12 1/4] dt-bindings: net: pse-pd: add bindings for Realtek PSE MCU Date: Sun, 9 Aug 2026 11:22:47 +0000 Message-ID: <20260809112251.5797-2-jelonek.jonas@gmail.com> X-Mailer: git-send-email 2.53.0 In-Reply-To: <20260809112251.5797-1-jelonek.jonas@gmail.com> References: <20260809112251.5797-1-jelonek.jonas@gmail.com> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Add a binding for the microcontroller (MCU) that fronts the PSE silicon on a range of managed Realtek-based switches. The host talks only to the MCU, over I2C/SMBus or UART, using a fixed message-based protocol; the PSE chips behind it never appear on the bus. The device is the MCU together with its Realtek firmware: the firmware and its host protocol are what the binding describes, not the general-purpose microcontroller they run on. The PSE silicon behind the MCU (Realtek or Broadcom) is reported by the MCU and detected at runtime, so it is not described here - hence the 'realtek' vendor prefix. Two protocol generations exist, both Realtek's, selected by the compatible: gen1 on older boards (fronting Broadcom PSE silicon) and gen2, the altered protocol used with Realtek's own PSE silicon. On an I2C attachment the framing the MCU firmware expects is part of the compatible as well - '-smbus' or raw '-i2c'; a UART attachment carries no framing suffix, as the transport is given by the parent serial node. Each board additionally carries a device-specific compatible that falls back to one of the protocol compatibles above. Drivers bind on the protocol compatible; the device-specific string identifies the board and reserves a place for a future per-board quirk without having to retrofit device trees already in the field. Signed-off-by: Jonas Jelonek Reviewed-by: Oleksij Rempel --- .../net/pse-pd/realtek,pse-mcu-gen1.yaml | 182 ++++++++++++++++++ 1 file changed, 182 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/pse-pd/realtek,pse-mcu-gen1.yaml diff --git a/Documentation/devicetree/bindings/net/pse-pd/realtek,pse-mcu-gen1.yaml b/Documentation/devicetree/bindings/net/pse-pd/realtek,pse-mcu-gen1.yaml new file mode 100644 index 000000000000..3bb32349c28c --- /dev/null +++ b/Documentation/devicetree/bindings/net/pse-pd/realtek,pse-mcu-gen1.yaml @@ -0,0 +1,182 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/pse-pd/realtek,pse-mcu-gen1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek PSE MCU + +maintainers: + - Jonas Jelonek + +description: | + A microcontroller (MCU) that manages the PSE (Power Sourcing Equipment) + hardware on a range of managed PoE switches. The host CPU talks only to + this MCU - over I2C/SMBus or UART - using a small message-based protocol; + the PSE silicon it drives sits behind the MCU and is never accessed + directly. For example, on the Zyxel GS1900-10HP the SoC reaches the MCU + over UART, and the MCU manages the on-board PSE chip. + + This binding describes the MCU together with its Realtek firmware: the + firmware and its host protocol, which are stable across boards. The + microcontroller silicon is a general-purpose part that varies, and the + PSE silicon behind the MCU (Realtek RTL823x/RTL8239* or Broadcom + BCM59xxx) is reported by the MCU and detected at runtime - neither is + named here. + + Two protocol generations exist, both Realtek's: + gen1 older boards, where the MCU fronts Broadcom PSE silicon + gen2 the altered protocol used with Realtek's own PSE silicon + + On an I2C attachment the framing the MCU firmware expects is part of the + compatible: '-smbus' (reads carry a leading command byte and a repeated + start) or '-i2c' (bare block writes and reads). A UART attachment carries + no framing suffix; the transport is given by the parent 'serial' node. + + Each board additionally carries a device-specific compatible that falls + back to one of the protocol compatibles above. Drivers bind on the + protocol compatible; the device-specific string identifies the board and + reserves a place for a future per-board quirk without having to retrofit + device trees already in the field. + +properties: + compatible: + oneOf: + # UART + - items: + - enum: + - zyxel,gs1900-10hp-a1-pse + - const: realtek,pse-mcu-gen1 + + # I2C, SMBus framing + - items: + - enum: + - zyxel,gs1920-24hp-v2-pse + - const: realtek,pse-mcu-gen1-smbus + + # UART + - items: + - enum: + - zyxel,gs1900-10hp-b1-pse + - zyxel,xmg1915-10ep-pse + - const: realtek,pse-mcu-gen2 + + # I2C, SMBus framing + - items: + - enum: + - zyxel,xs1930-12hp-pse + - const: realtek,pse-mcu-gen2-smbus + + # I2C, raw framing + - items: + - enum: + - linksys,lgs328mpc-v2-pse + - const: realtek,pse-mcu-gen2-i2c + + reg: + maxItems: 1 + + reset-gpios: + description: Reset line of the MCU. + maxItems: 1 + + disable-ports-gpios: + description: + Hardware gate that forces all ports into admin-disabled state while + asserted. + maxItems: 1 + +required: + - compatible + +allOf: + - $ref: pse-controller.yaml# + # A '-smbus'/'-i2c' compatible is an I2C attachment: it has 'reg' and + # cannot carry serial bus properties. A bare gen compatible is a UART + # attachment: no 'reg', the transport comes from the parent serial node. + - if: + properties: + compatible: + contains: + enum: + - realtek,pse-mcu-gen1-smbus + - realtek,pse-mcu-gen2-smbus + - realtek,pse-mcu-gen2-i2c + then: + required: + - reg + properties: + current-speed: false + max-speed: false + else: + allOf: + - $ref: /schemas/serial/serial-peripheral-props.yaml# + + properties: + reg: false + +unevaluatedProperties: false + +examples: + # SMBus-framed I2C attachment + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-pse@20 { + compatible = "zyxel,xs1930-12hp-pse", "realtek,pse-mcu-gen2-smbus"; + reg = <0x20>; + + pse-pis { + #address-cells = <1>; + #size-cells = <0>; + + pse-pi@0 { + reg = <0>; + #pse-cells = <0>; + }; + }; + }; + }; + + # Raw-I2C-framed attachment + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-pse@20 { + compatible = "linksys,lgs328mpc-v2-pse", "realtek,pse-mcu-gen2-i2c"; + reg = <0x20>; + + pse-pis { + #address-cells = <1>; + #size-cells = <0>; + + pse-pi@0 { + reg = <0>; + #pse-cells = <0>; + }; + }; + }; + }; + + # UART attachment + - | + serial { + ethernet-pse { + compatible = "zyxel,gs1900-10hp-a1-pse", "realtek,pse-mcu-gen1"; + current-speed = <19200>; + + pse-pis { + #address-cells = <1>; + #size-cells = <0>; + + pse-pi@0 { + reg = <0>; + #pse-cells = <0>; + }; + }; + }; + }; -- 2.53.0