From: Jakub Kicinski <kuba@kernel.org>
To: javen <javen_xu@realsil.com.cn>
Cc: <hkallweit1@gmail.com>, <nic_swsd@realtek.com>,
<andrew+netdev@lunn.ch>, <davem@davemloft.net>,
<edumazet@google.com>, <pabeni@redhat.com>, <horms@kernel.org>,
<netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH net-next v10 5/7] r8169: add support and enable rss
Date: Mon, 10 Aug 2026 14:38:25 -0700 [thread overview]
Message-ID: <20260810143825.28a3d516@kernel.org> (raw)
In-Reply-To: <20260803021305.488-6-javen_xu@realsil.com.cn>
On Mon, 3 Aug 2026 10:13:03 +0800 javen wrote:
> From: Javen Xu <javen_xu@realsil.com.cn>
>
> This patch adds support and enable rss for RTL8127.
>
> Signed-off-by: Javen Xu <javen_xu@realsil.com.cn>
> ---
> Changes in v2:
> - some changes moved from Patch 2/7
>
> Changes in v3:
> - add struct rtl8169_rss_data. Allocate it dynamically when needed.
> - define rss_key as an u32 array
> - replace some magic bit numbers in rtl8169_set_rss_hash_opt() and
> rtl8125_set_rx_q_num()
> - use union to combine different rx descriptor, refactor struct RxDesc
> - remove dead code from rtl8169_double_check_rss_support()
>
> Changes in v4:
> - rename macro definition, e.g R8127_MAX_IRQ to R8127_MAX_NUM_IRQVEC
> - change hw_supp_indir_tbl_entries type to unsigned int
> - change init_rx_desc_type type to enum
> - remove rtl_check_rss_support(), add helper function
> rtl_hw_support_rss()
> - remove hw_curr_isr_ver, use irq_nvecs to judge whether we should
> enable vector interrupt mapping, use tp->num_rx_ring to judge whether
> we should enable rss
> - remove function rtl8169_double_check_rss_support(), use
> rtl8169_set_rx_ring_num() to set num_rx_ring according to tp->irq_nvecs
>
> Changes in v5:
> - no changes
>
> Changes in v6:
> - change rss_queue_num type from u8 to unsigned int
> - fix rx desc clear in rtl8169_rx_clear() for different desc type
> - clamping num_rx_ring with rounddown_pow_of_two()
>
> Changes in v7:
> - remove unused macro
> - change unfixed type in rtl8169_store_reta
>
> Changes in v8:
> - refill desc->addr when rx_desc reset
> - rtl8169_set_channels fixed in patch 7/7
>
> Changes in v9:
> - remove rtl8169_set_desc_dma_addr, only set desc dma addr for
> RX_DESC_TYPE_RSS desc
>
> Changes in v10:
> - Change rss_key to u8 array and write rss_key_reg as u32 values.
> Use get_unaligned_le32() to keep behavior consistent on big-endian
> and little-endian
> ---
> drivers/net/ethernet/realtek/r8169_main.c | 379 ++++++++++++++++++++--
> 1 file changed, 346 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
> index 31f6d0c2e3d1..4e571fcea092 100644
> --- a/drivers/net/ethernet/realtek/r8169_main.c
> +++ b/drivers/net/ethernet/realtek/r8169_main.c
> @@ -88,6 +88,19 @@
> #define R8127_MAX_TX_QUEUES 8
> #define R8169_DEFAULT_RX_QUEUES 1
> #define R8169_MAX_TX_QUEUES 1
> +#define R8127_MAX_NUM_IRQVEC 32
> +#define R8127_MIN_NUM_IRQVEC 30
> +#define R8169_IRQ_DEFAULT 1
> +#define RTL_RSS_KEY_SIZE 40
> +#define RSS_CPU_NUM_MASK GENMASK(18, 16)
> +#define RSS_HASH_MASK GENMASK(10, 8)
> +#define RTL_MAX_INDIRECTION_TABLE_ENTRIES 128
> +#define RXS_RSS_UDP BIT(27)
> +#define RXS_RSS_IPV4 BIT(28)
> +#define RXS_RSS_IPV6 BIT(29)
> +#define RXS_RSS_TCP BIT(30)
> +#define RXS_RSS_L3_TYPE_MASK (RXS_RSS_IPV4 | RXS_RSS_IPV6)
> +#define RXS_RSS_L4_TYPE_MASK (RXS_RSS_TCP | RXS_RSS_UDP)
>
> #define OCP_STD_PHY_BASE 0xa400
>
> @@ -595,6 +608,20 @@ enum rtl_register_content {
> #define ISRIMR_LINKCHG BIT(29)
> #define ISRIMR_TOK_Q0 BIT(8)
> #define ISRIMR_ROK_Q0 BIT(0)
> +#define RTL_DESC_TYPE_CTRL 0xd8
> +#define RSS_KEY_REG 0x4600
> +#define RSS_INDIRECTION_TBL_REG 0x4700
> +#define RSS_CTRL_TCP_IPV4_SUPP BIT(0)
> +#define RTL_DESC_TYPE_RSS BIT(1)
> +#define RSS_CTRL_IPV4_SUPP BIT(1)
> +#define RSS_CTRL_TCP_IPV6_SUPP BIT(2)
> +#define RSS_CTRL_IPV6_SUPP BIT(3)
> +#define RSS_CTRL_IPV6_EXT_SUPP BIT(4)
> +#define RSS_CTRL_TCP_IPV6_EXT_SUPP BIT(5)
> +#define RX_RES_RSS BIT(22)
> +#define RX_RUNT_RSS BIT(21)
> +#define RX_CRC_RSS BIT(20)
> +#define RTL_RX_Q_NUM_MASK GENMASK(4, 2)
> };
>
> enum rtl_desc_bit {
> @@ -652,6 +679,11 @@ enum rtl_rx_desc_bit {
> #define RxProtoIP (PID1 | PID0)
> #define RxProtoMask RxProtoIP
>
> +#define RX_UDPT_DESC_RSS BIT(19)
> +#define RX_TCPT_DESC_RSS BIT(18)
> +#define RX_UDPF_DESC_RSS BIT(16) /* UDP/IP checksum failed */
> +#define RX_TCPF_DESC_RSS BIT(15) /* TCP/IP checksum failed */
> +
> IPFail = (1 << 16), /* IP checksum failed */
> UDPFail = (1 << 15), /* UDP/IP checksum failed */
> TCPFail = (1 << 14), /* TCP/IP checksum failed */
> @@ -673,9 +705,27 @@ struct TxDesc {
> };
>
> struct RxDesc {
> - __le32 opts1;
> - __le32 opts2;
> - __le64 addr;
> + union {
> + /* RX_DESC_TYPE_DEFAULT */
> + struct {
> + __le32 opts1;
> + __le32 opts2;
> + __le64 addr;
> + };
> +
> + /* RX_DESC_TYPE_RSS */
> + struct {
> + union {
> + __le64 rss_addr;
> + struct {
> + __le32 rss_info;
> + __le32 rss_result;
> + } rss_dword;
> + };
> + __le32 rss_opts2;
> + __le32 rss_opts1;
> + };
> + };
> };
>
> struct ring_info {
> @@ -747,6 +797,11 @@ enum rtl_dash_type {
> RTL_DASH_25_BP,
> };
>
> +enum rx_desc_type {
> + RX_DESC_TYPE_DEFAULT,
> + RX_DESC_TYPE_RSS,
> +};
> +
> struct rtl8169_rx_ring {
> u32 cur_rx; /* Index of next Rx pkt. */
> u32 dirty_rx; /* Index for recycling. */
> @@ -756,6 +811,12 @@ struct rtl8169_rx_ring {
> struct page *rx_databuff[NUM_RX_DESC]; /* Rx data buffers */
> };
>
> +struct rtl8169_rss_data {
> + u8 rss_key[RTL_RSS_KEY_SIZE];
> + u8 rss_indir_tbl[RTL_MAX_INDIRECTION_TABLE_ENTRIES];
> + unsigned int hw_supp_indir_tbl_entries;
> +};
> +
> struct rtl8169_private {
> void __iomem *mmio_addr; /* memory map physical address */
> struct pci_dev *pci_dev;
> @@ -775,7 +836,9 @@ struct rtl8169_private {
> u16 tx_lpi_timer;
> u32 irq_mask;
> unsigned int hw_supp_num_rx_queues;
> + struct rtl8169_rss_data *rss_data;
> unsigned int irq_nvecs;
> + enum rx_desc_type init_rx_desc_type;
> struct clk *clk;
>
> struct {
> @@ -1605,6 +1668,11 @@ static bool rtl_dash_is_enabled(struct rtl8169_private *tp)
> }
> }
>
> +static bool rtl_hw_support_rss(struct rtl8169_private *tp)
> +{
> + return tp->mac_version == RTL_GIGA_MAC_VER_80;
> +}
> +
> static enum rtl_dash_type rtl_get_dash_type(struct rtl8169_private *tp)
> {
> switch (tp->mac_version) {
> @@ -1906,9 +1974,20 @@ static inline u32 rtl8169_tx_vlan_tag(struct sk_buff *skb)
> TxVlanTag | swab16(skb_vlan_tag_get(skb)) : 0x00;
> }
>
> -static void rtl8169_rx_vlan_tag(struct RxDesc *desc, struct sk_buff *skb)
> +static void rtl8169_rx_vlan_tag(struct rtl8169_private *tp,
> + struct RxDesc *desc,
> + struct sk_buff *skb)
> {
> - u32 opts2 = le32_to_cpu(desc->opts2);
> + u32 opts2;
> +
> + switch (tp->init_rx_desc_type) {
> + case RX_DESC_TYPE_RSS:
> + opts2 = le32_to_cpu(desc->rss_opts2);
> + break;
> + default:
> + opts2 = le32_to_cpu(desc->opts2);
> + break;
> + }
>
> if (opts2 & RxVlanTag)
> __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), swab16(opts2 & 0xffff));
> @@ -2736,17 +2815,27 @@ static void rtl_hw_reset(struct rtl8169_private *tp)
> rtl_loop_wait_low(tp, &rtl_chipcmd_cond, 100, 100);
> }
>
> +static void rtl8169_init_rss(struct rtl8169_private *tp)
> +{
> + for (int i = 0; i < tp->rss_data->hw_supp_indir_tbl_entries; i++)
> + tp->rss_data->rss_indir_tbl[i] = ethtool_rxfh_indir_default(i, tp->num_rx_rings);
> +
> + netdev_rss_key_fill(tp->rss_data->rss_key, RTL_RSS_KEY_SIZE);
> +}
> +
> static void rtl_setup_rx_params(struct rtl8169_private *tp)
> {
> tp->num_rx_rings = 1;
> switch (tp->mac_version) {
> case RTL_GIGA_MAC_VER_80:
> tp->hw_supp_num_rx_queues = R8169_MAX_RX_QUEUES;
> + tp->rss_data->hw_supp_indir_tbl_entries = RTL_MAX_INDIRECTION_TABLE_ENTRIES;
> break;
> default:
> tp->hw_supp_num_rx_queues = R8169_DEFAULT_RX_QUEUES;
> break;
> }
> + tp->init_rx_desc_type = RX_DESC_TYPE_DEFAULT;
> }
>
> static void rtl_request_firmware(struct rtl8169_private *tp)
> @@ -2871,6 +2960,58 @@ static void rtl_set_rx_max_size(struct rtl8169_private *tp)
> RTL_W16(tp, RxMaxSize, R8169_RX_BUF_SIZE + 1);
> }
>
> +static void rtl8169_store_rss_key(struct rtl8169_private *tp)
> +{
> + u8 *rss_key = tp->rss_data->rss_key;
> + const u16 rss_key_reg = RSS_KEY_REG;
> +
> + /* Write redirection table to HW */
> + for (int i = 0; i < RTL_RSS_KEY_SIZE; i += sizeof(u32))
> + RTL_W32(tp, rss_key_reg + i, get_unaligned_le32(rss_key + i));
you fetched packed word of the key with get_unaligned_le32()..
> +}
> +
> +static void rtl8169_store_reta(struct rtl8169_private *tp)
> +{
> + u8 *indir_tbl = tp->rss_data->rss_indir_tbl;
> + unsigned int i;
> +
> + /* Write redirection table to HW */
> + for (i = 0; i < tp->rss_data->hw_supp_indir_tbl_entries; i += 4) {
> + u32 reta = (u32)indir_tbl[i] |
> + (u32)indir_tbl[i + 1] << 8 |
> + (u32)indir_tbl[i + 2] << 16 |
> + (u32)indir_tbl[i + 3] << 24;
.. but the indir table you pack manually, why?
> + RTL_W32(tp, RSS_INDIRECTION_TBL_REG + i, reta);
> + }
> +}
> +
> +static void rtl8169_set_rss_hash_opt(struct rtl8169_private *tp)
> +{
> + u32 rss_ctrl;
> +
> + rss_ctrl = FIELD_PREP(RSS_CPU_NUM_MASK, ilog2(tp->num_rx_rings));
> +
> + /* Perform hash on these packet types */
> + rss_ctrl |= RSS_CTRL_TCP_IPV4_SUPP
> + | RSS_CTRL_IPV4_SUPP
> + | RSS_CTRL_IPV6_SUPP
> + | RSS_CTRL_IPV6_EXT_SUPP
> + | RSS_CTRL_TCP_IPV6_SUPP
> + | RSS_CTRL_TCP_IPV6_EXT_SUPP;
| should be at the end of the lines
> + rss_ctrl |= FIELD_PREP(RSS_HASH_MASK,
> + ilog2(tp->rss_data->hw_supp_indir_tbl_entries));
> +
> + RTL_W32(tp, RSS_CTRL_8125, rss_ctrl);
> +}
> +
> +static void rtl_set_rss_config(struct rtl8169_private *tp)
> +{
> + rtl8169_set_rss_hash_opt(tp);
> + rtl8169_store_reta(tp);
> + rtl8169_store_rss_key(tp);
> +}
> + /* enable rx descriptor type v4 and set queue num for rss*/
nit: missing space at the end of the comment
> - nvecs = pci_alloc_irq_vectors(pdev, 1, 1, flags);
> + nvecs = pci_alloc_irq_vectors(pdev, get_min_irq_nvecs(tp), get_max_irq_nvecs(tp), flags);
> +
> + if (nvecs < 0)
> + nvecs = pci_alloc_irq_vectors(pdev, 1, 1, flags);
Why the two calls to pci_alloc_irq_vectors() ?
It should select the best number of IRQs it can, so why not just call
pci_alloc_irq_vectors(pdev, 1, get_max_irq_nvecs(tp), flags);
note: please review the submission for unnecessarily going over 80
chars, we still prefer <=80 lines in netdev
> if (nvecs < 0)
> return nvecs;
next prev parent reply other threads:[~2026-08-10 21:38 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-03 2:12 [PATCH net-next v10 0/7] r8169: add RSS support for RTL8127 javen
2026-08-03 2:12 ` [PATCH net-next v10 1/7] r8169: add support for multi irqs javen
2026-08-03 2:13 ` [PATCH net-next v10 2/7] r8169: refactor RX path to prepare for multi-queue javen
2026-08-10 21:26 ` Jakub Kicinski
2026-08-03 2:13 ` [PATCH net-next v10 3/7] r8169: add support for new interrupt mapping javen
2026-08-10 21:29 ` Jakub Kicinski
2026-08-03 2:13 ` [PATCH net-next v10 4/7] r8169: enable " javen
2026-08-10 21:31 ` Jakub Kicinski
2026-08-03 2:13 ` [PATCH net-next v10 5/7] r8169: add support and enable rss javen
2026-08-10 21:31 ` Jakub Kicinski
2026-08-10 21:38 ` Jakub Kicinski [this message]
2026-08-03 2:13 ` [PATCH net-next v10 6/7] r8169: move struct ethtool_ops javen
2026-08-03 2:13 ` [PATCH net-next v10 7/7] r8169: support setting rx queue numbers via ethtool javen
2026-08-10 21:41 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260810143825.28a3d516@kernel.org \
--to=kuba@kernel.org \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=horms@kernel.org \
--cc=javen_xu@realsil.com.cn \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nic_swsd@realtek.com \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox