From: Subrat Pandey <subratp@marvell.com>
To: <linux-kernel@vger.kernel.org>, <netdev@vger.kernel.org>
Cc: <pabeni@redhat.com>, <kuba@kernel.org>, <edumazet@google.com>,
<davem@davemloft.net>, <andrew+netdev@lunn.ch>,
<sbhatta@marvell.com>, <rkannoth@marvell.com>,
<gakula@marvell.com>, <sgoutham@marvell.com>,
<subratp@marvell.com>
Subject: [PATCH net v3 1/2] octeontx2-pf: Fix aura BPID assignment when CONFIG_DCB is enabled
Date: Wed, 12 Aug 2026 17:22:57 +0530 [thread overview]
Message-ID: <20260812115258.773319-2-subratp@marvell.com> (raw)
In-Reply-To: <20260812115258.773319-1-subratp@marvell.com>
From: Geetha sowjanya <gakula@marvell.com>
Previously, BPID assignment under CONFIG_DCB assumed
`queue_to_pfc_map` was always initialized. For SDP VFs this leads to
invalid memory access as it was not initialized.
This patch adds a NULL check for `queue_to_pfc_map` before
dereferencing it. Also, simplifies the logic by always assigning a
default BPID first, then conditionally overriding it if CONFIG_DCB is
enabled and the map exists.
Fixes: 184fb40f731b ("octeontx2-pf: Avoid adding dcbnl_ops for LBK and SDP vf")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Subrat Pandey <subratp@marvell.com>
---
v3:
- Unify BPID index logic into a shared otx2_get_bpid_idx() helper,
dropping the per-file #ifdef CONFIG_DCB and cn20k_aura_bpid_idx().
- Drop trailing period from the Fixes: tag.
.../net/ethernet/marvell/octeontx2/nic/cn20k.c | 11 +----------
.../ethernet/marvell/octeontx2/nic/otx2_common.c | 16 ++++++----------
.../ethernet/marvell/octeontx2/nic/otx2_common.h | 8 ++++++++
3 files changed, 15 insertions(+), 20 deletions(-)
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/cn20k.c b/drivers/net/ethernet/marvell/octeontx2/nic/cn20k.c
index dbf173196608..65248bb0b61d 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/cn20k.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/cn20k.c
@@ -242,15 +242,6 @@ int cn20k_register_pfvf_mbox_intr(struct otx2_nic *pf, int numvfs)
#define RQ_BP_LVL_AURA (255 - ((85 * 256) / 100)) /* BP when 85% is full */
-static u8 cn20k_aura_bpid_idx(struct otx2_nic *pfvf, int aura_id)
-{
-#ifdef CONFIG_DCB
- return pfvf->queue_to_pfc_map[aura_id];
-#else
- return 0;
-#endif
-}
-
static int cn20k_tc_get_entry_index(struct otx2_flow_config *flow_cfg,
struct otx2_tc_flow *node)
{
@@ -580,7 +571,7 @@ static int cn20k_aura_aq_init(struct otx2_nic *pfvf, int aura_id,
if (pfvf->nix_blkaddr == BLKADDR_NIX1)
aq->aura.bp_ena = 1;
- bpid_idx = cn20k_aura_bpid_idx(pfvf, aura_id);
+ bpid_idx = otx2_get_bpid_idx(pfvf, aura_id);
aq->aura.bpid = pfvf->bpid[bpid_idx];
/* Set backpressure level for RQ's Aura */
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
index 3d253132a17f..142e331cff9e 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
@@ -1055,6 +1055,7 @@ int otx2_cq_init(struct otx2_nic *pfvf, u16 qidx)
struct nix_aq_enq_req *aq;
struct otx2_cq_queue *cq;
struct otx2_pool *pool;
+ u8 bpid_idx;
cq = &qset->cq[qidx];
cq->cq_idx = qidx;
@@ -1132,11 +1133,8 @@ int otx2_cq_init(struct otx2_nic *pfvf, u16 qidx)
if (!is_otx2_lbkvf(pfvf->pdev)) {
/* Enable receive CQ backpressure */
aq->cq.bp_ena = 1;
-#ifdef CONFIG_DCB
- aq->cq.bpid = pfvf->bpid[pfvf->queue_to_pfc_map[qidx]];
-#else
- aq->cq.bpid = pfvf->bpid[0];
-#endif
+ bpid_idx = otx2_get_bpid_idx(pfvf, qidx);
+ aq->cq.bpid = pfvf->bpid[bpid_idx];
/* Set backpressure level is same as cq pass level */
aq->cq.bp = RQ_PASS_LVL_CQ(pfvf->hw.rq_skid, qset->rqe_cnt);
@@ -1378,6 +1376,7 @@ int otx2_aura_aq_init(struct otx2_nic *pfvf, int aura_id,
{
struct npa_aq_enq_req *aq;
struct otx2_pool *pool;
+ u8 bpid_idx;
int err;
pool = &pfvf->qset.pool[pool_id];
@@ -1433,11 +1432,8 @@ int otx2_aura_aq_init(struct otx2_nic *pfvf, int aura_id,
*/
if (pfvf->nix_blkaddr == BLKADDR_NIX1)
aq->aura.bp_ena = 1;
-#ifdef CONFIG_DCB
- aq->aura.nix0_bpid = pfvf->bpid[pfvf->queue_to_pfc_map[aura_id]];
-#else
- aq->aura.nix0_bpid = pfvf->bpid[0];
-#endif
+ bpid_idx = otx2_get_bpid_idx(pfvf, aura_id);
+ aq->aura.nix0_bpid = pfvf->bpid[bpid_idx];
/* Set backpressure level for RQ's Aura */
aq->aura.bp = RQ_BP_LVL_AURA;
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
index eecee612b7b2..e6918252cca4 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
@@ -1029,6 +1029,14 @@ static inline int otx2_tc_flower_rule_cnt(struct otx2_nic *pfvf)
return pfvf->flow_cfg->nr_flows;
}
+static u8 otx2_get_bpid_idx(struct otx2_nic *pfvf, int qidx)
+{
+ if (IS_ENABLED(CONFIG_DCB))
+ return pfvf->queue_to_pfc_map[qidx];
+
+ return 0;
+}
+
/* MSI-X APIs */
void otx2_free_cints(struct otx2_nic *pfvf, int n);
void otx2_set_cints_affinity(struct otx2_nic *pfvf);
--
2.43.0
next prev parent reply other threads:[~2026-08-12 11:53 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-12 11:52 [PATCH net v3 0/2] octeontx2: Misc fixes for RVU drivers Subrat Pandey
2026-08-12 11:52 ` Subrat Pandey [this message]
2026-08-12 11:52 ` [PATCH net v3 2/2] octeontx2-af: mcs: Fix SC resource cleanup loop Subrat Pandey
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260812115258.773319-2-subratp@marvell.com \
--to=subratp@marvell.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=gakula@marvell.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=rkannoth@marvell.com \
--cc=sbhatta@marvell.com \
--cc=sgoutham@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox