Netdev List
 help / color / mirror / Atom feed
From: Xuanqiang Luo <xuanqiang.luo@linux.dev>
To: netdev@vger.kernel.org
Cc: andrew@lunn.ch, hkallweit1@gmail.com, linux@armlinux.org.uk,
	davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
	pabeni@redhat.com, linux-kernel@vger.kernel.org,
	Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Subject: [PATCH net v1 1/2] net: phy: split phy_probe() error paths
Date: Wed, 12 Aug 2026 20:51:26 +0800	[thread overview]
Message-ID: <20260812125127.106255-2-xuanqiang.luo@linux.dev> (raw)
In-Reply-To: <20260812125127.106255-1-xuanqiang.luo@linux.dev>

From: Xuanqiang Luo <luoxuanqiang@kylinos.cn>

phy_probe() uses one cleanup path for failures at every initialization
stage. This runs cleanup for resources that have not been initialized
and leaves phy_setup_ports() relying on its caller to remove an SFP
upstream after a partial failure.

Make phy_setup_ports() unwind the SFP upstream before removing its ports.
Then split the phy_probe() cleanup so each failure path unwinds only the
resources that may have been initialized.

Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
---
 drivers/net/phy/phy_device.c | 23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 0615228459ef4..f8e434daab66e 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -3556,6 +3556,9 @@ static int phy_setup_ports(struct phy_device *phydev)
 	return 0;
 
 out:
+	sfp_bus_del_upstream(phydev->sfp_bus);
+	phydev->sfp_bus = NULL;
+
 	phy_cleanup_ports(phydev);
 	return ret;
 }
@@ -3681,7 +3684,7 @@ static int phy_probe(struct device *dev)
 	if (phydev->drv->probe) {
 		err = phydev->drv->probe(phydev);
 		if (err)
-			goto out;
+			goto out_reset;
 	}
 
 	phy_disable_interrupts(phydev);
@@ -3702,7 +3705,7 @@ static int phy_probe(struct device *dev)
 		err = genphy_read_abilities(phydev);
 
 	if (err)
-		goto out;
+		goto out_reset;
 
 	if (!linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
 			       phydev->supported))
@@ -3719,7 +3722,7 @@ static int phy_probe(struct device *dev)
 
 	err = phy_setup_ports(phydev);
 	if (err)
-		goto out;
+		goto out_reset;
 
 	phy_advertise_supported(phydev);
 
@@ -3728,7 +3731,7 @@ static int phy_probe(struct device *dev)
 	 */
 	err = genphy_c45_read_eee_adv(phydev, phydev->advertising_eee);
 	if (err)
-		goto out;
+		goto out_ports;
 
 	/* Get the EEE modes we want to prohibit. */
 	of_set_phy_eee_broken(phydev);
@@ -3781,20 +3784,22 @@ static int phy_probe(struct device *dev)
 	if (IS_ENABLED(CONFIG_PHYLIB_LEDS) && !phy_driver_is_genphy(phydev)) {
 		err = of_phy_leds(phydev);
 		if (err)
-			goto out;
+			goto out_led_triggers;
 	}
 
 	return 0;
 
-out:
+out_led_triggers:
+	if (!phydev->is_on_sfp_module)
+		phy_led_triggers_unregister(phydev);
+
+out_ports:
 	sfp_bus_del_upstream(phydev->sfp_bus);
 	phydev->sfp_bus = NULL;
 
 	phy_cleanup_ports(phydev);
 
-	if (!phydev->is_on_sfp_module)
-		phy_led_triggers_unregister(phydev);
-
+out_reset:
 	/* Re-assert the reset signal on error */
 	phy_device_reset(phydev, 1);
 
-- 
2.43.0


  reply	other threads:[~2026-08-12 12:52 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-12 12:51 [PATCH net v1 0/2] net: phy: fix driver cleanup after probe failure Xuanqiang Luo
2026-08-12 12:51 ` Xuanqiang Luo [this message]
2026-08-12 13:41   ` [PATCH net v1 1/2] net: phy: split phy_probe() error paths Andrew Lunn
2026-08-12 16:05     ` Maxime Chevallier
2026-08-12 12:51 ` [PATCH net v1 2/2] net: phy: call driver remove when core initialization fails Xuanqiang Luo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260812125127.106255-2-xuanqiang.luo@linux.dev \
    --to=xuanqiang.luo@linux.dev \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=luoxuanqiang@kylinos.cn \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox