From: Alex Elder <elder@riscstar.com>
To: maxime.chevallier@bootlin.com, andrew+netdev@lunn.ch,
davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
pabeni@redhat.com
Cc: sashiko-bot@kernel.org, mcoquelin.stm32@gmail.com,
alexandre.torgue@foss.st.com,
linux-stm32@st-md-mailman.stormreply.com, netdev@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH net-next v2 1/2] net: stmmac: use dma_addr_t for DMA addresses
Date: Wed, 12 Aug 2026 11:38:30 -0500 [thread overview]
Message-ID: <20260812163832.271742-2-elder@riscstar.com> (raw)
In-Reply-To: <20260812163832.271742-1-elder@riscstar.com>
In jumbo_frm() (implemented in both "chain_mode.c" and "ring_mode.c"),
an unsigned integer local variable is used to hold the value returned
by dma_map_single(). On systems where a dma_addr_t is 64 bits, the
subsequent dma_mapping_error() check of the returned value operates
only on the low 32 bits (whose high bit won't be sign-extended). In
this case, dma_mapping_error() would return 0 (no error) even if there
were one.
Fix this in both spots by using a dma_addr_t for the local variable.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Link: https://lore.kernel.org/linux-devicetree/20260606010122.21A211F00899@smtp.kernel.org/
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Alex Elder <elder@riscstar.com>
---
drivers/net/ethernet/stmicro/stmmac/chain_mode.c | 3 ++-
drivers/net/ethernet/stmicro/stmmac/ring_mode.c | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/chain_mode.c b/drivers/net/ethernet/stmicro/stmmac/chain_mode.c
index fc04a23342cfc..ec25193d287bb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/chain_mode.c
+++ b/drivers/net/ethernet/stmicro/stmmac/chain_mode.c
@@ -20,9 +20,10 @@ static int jumbo_frm(struct stmmac_tx_queue *tx_q, struct sk_buff *skb,
unsigned int nopaged_len = skb_headlen(skb);
struct stmmac_priv *priv = tx_q->priv_data;
unsigned int entry = tx_q->cur_tx;
- unsigned int bmax, buf_len, des2;
+ unsigned int bmax, buf_len;
unsigned int i = 1, len;
struct dma_desc *desc;
+ dma_addr_t des2;
desc = tx_q->dma_tx + entry;
diff --git a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
index 78fc6aa5bbe95..664d8cfb58cdc 100644
--- a/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
+++ b/drivers/net/ethernet/stmicro/stmmac/ring_mode.c
@@ -20,8 +20,9 @@ static int jumbo_frm(struct stmmac_tx_queue *tx_q, struct sk_buff *skb,
unsigned int nopaged_len = skb_headlen(skb);
struct stmmac_priv *priv = tx_q->priv_data;
unsigned int entry = tx_q->cur_tx;
- unsigned int bmax, len, des2;
+ unsigned int bmax, len;
struct dma_desc *desc;
+ dma_addr_t des2;
if (priv->extend_desc)
desc = (struct dma_desc *)(tx_q->dma_etx + entry);
--
2.53.0
next prev parent reply other threads:[~2026-08-12 16:38 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-12 16:38 [PATCH net-next v2 0/2] net: stmmac: DMA address handling fixes Alex Elder
2026-08-12 16:38 ` Alex Elder [this message]
2026-08-12 16:38 ` [PATCH net-next v2 2/2] net: stmmac: convert DMA address to lower 32 before assignment Alex Elder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260812163832.271742-2-elder@riscstar.com \
--to=elder@riscstar.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=maxime.chevallier@bootlin.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=sashiko-bot@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox