[PATCH v3 0/3] fix the MTL fifo and DMA race condition

[Abid Ali <dev.taqnialabs@gmail.com>]

To: Andrew Lunn <andrew+netdev@lunn.ch>
To: David S. Miller <davem@davemloft.net>
To: Eric Dumazet <edumazet@google.com>
To: Jakub Kicinski <kuba@kernel.org>
To: Paolo Abeni <pabeni@redhat.com>
To: Maxime Coquelin <mcoquelin.stm32@gmail.com>
To: Alexandre Torgue <alexandre.torgue@foss.st.com>
To: Russell King <linux@armlinux.org.uk>
To: Qingfang Deng <qingfang.deng@linux.dev>
Cc: netdev@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Abid Ali <dev.taqnialabs@gmail.com>

Changes in v3:
- v2 tried to fix the ordering in teardown path, but it still would
  not follow the ideal flow mentioned in the databook. So have
  seperated the patches to deal with the teardown and some findings
  from sashiko.

- "net: stmmac: enable MAC rx/tx after DMA start": reduced in scope,
  now only moves the MAC enable after stmmac_start_all_dma() in
  stmmac_hw_setup() and stmmac_xdp_open().
  This is to handle the overflow scenario during bootup causing hang.
  The teardown side in __stmmac_release() is no longer touched here.
  This change could go independently fix the overflow hang at bootup.

- Added "net: stmmac: xgmac: tear the datapath down in the documented
  order": for ensuring ordered sequence is followed for teardown.

- Added "net: stmmac: xgmac: decouple the MAC Rx/Tx enables from the
  DMA ops": drops the global TE/RE writes from the per-channel XGMAC
  DMA start/stop ops.

- Link to v2: https://lore.kernel.org/r/20260727-stmmac-rx-fifo-block-v2-1-4dc3457d31d0@gmail.com

Changes in v2:
- Corrected the ordering in teardown for xdp at stmmac_xdp_release().
- Link to v1: https://lore.kernel.org/r/20260726-stmmac-rx-fifo-block-v1-1-45ab094b6c02@gmail.com

---
Abid Ali (3):
      net: stmmac: enable MAC rx/tx after DMA start
      net: stmmac: xgmac: tear the datapath down in the documented order
      net: stmmac: xgmac: decouple the MAC Rx/Tx enables from the DMA ops

 drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h     |  8 ++
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c | 94 +++++++++++++++++++---
 drivers/net/ethernet/stmicro/stmmac/hwif.h         | 17 ++++
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  | 85 ++++++++++++++-----
 4 files changed, 170 insertions(+), 34 deletions(-)
---
base-commit: 8cd9520d35a6c38db6567e97dd93b1f11f185dc6
change-id: 20260726-stmmac-rx-fifo-block-ef589c38f96b

Best regards,
-- 
Abid Ali <dev.taqnialabs@gmail.com>