Netdev List
 help / color / mirror / Atom feed
From: Alessio Faina <alessio.faina@canonical.com>
To: andrea.mayer@uniroma2.it
Cc: davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
	pabeni@redhat.com, horms@kernel.org, shuah@kernel.org,
	netdev@vger.kernel.org, linux-kselftest@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH net] selftest/net: skip srv6_end_d[t/x][4/6]_*_test.sh if iproute2 too old
Date: Mon, 24 Aug 2026 11:15:37 +0200	[thread overview]
Message-ID: <20260824091537.2305107-1-alessio.faina@canonical.com> (raw)

In case iproute2 is older than version 5.14.0, released ~Sept 1, 2021,
the End.DT4/DT6/DX4/DX6 support are not available and the tests
contained in the following 4 test files
 - srv6_end_dt4_l3vpn_test.sh
 - srv6_end_dt6_l3vpn_test.sh
 - srv6_end_dx4_netfilter_test.sh
 - srv6_end_dx6_netfilter_test.sh
are failing in some kernel backports.
This is the result of one those tests in an unsupported environment:

\################################################################################
\TEST SECTION: SRv6 VPN connectivity test among hosts in the same tenant
\################################################################################
\
\    TEST: Hosts connectivity: hs-t100-1 -> hs-t100-2 (tenant 100)       [FAIL]
\
\    TEST: Hosts connectivity: hs-t100-2 -> hs-t100-1 (tenant 100)       [FAIL]
\
\    TEST: Hosts connectivity: hs-t200-3 -> hs-t200-4 (tenant 200)       [FAIL]
\
\    TEST: Hosts connectivity: hs-t200-4 -> hs-t200-3 (tenant 200)       [FAIL]
\

To amend this, check the current running iproute2 supports the required
feature and, if not, just skip the entire test to avoid a failure.

This is similar to what have been done for srv6_end_dt46_l3vpn_test.sh in
https://patchwork.kernel.org/project/netdevbpf/patch/20260715122859.36177-1-alessio.faina@canonical.com/

Signed-off-by: Alessio Faina <alessio.faina@canonical.com>
---
 tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh      | 10 ++++++++++
 tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh      | 10 ++++++++++
 tools/testing/selftests/net/srv6_end_dx4_netfilter_test.sh  | 10 ++++++++++
 tools/testing/selftests/net/srv6_end_dx6_netfilter_test.sh  | 10 ++++++++++
 4 files changed, 40 insertions(+)

diff --git a/tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh b/tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh
index a649dba3cb77..50e8c733cf9f 100755
--- a/tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh
+++ b/tools/testing/selftests/net/srv6_end_dt4_l3vpn_test.sh
@@ -459,6 +459,14 @@ host_vpn_isolation_tests()
 	done
 }
 
+test_iproute2_supp_or_ksft_skip()
+{
+	if ! ip route help 2>&1 | grep -qo "End.DT4"; then
+		echo "SKIP: Missing SRv6 End.DT4 support in iproute2"
+		exit "${ksft_skip}"
+	fi
+}
+
 if [ "$(id -u)" -ne 0 ];then
 	echo "SKIP: Need root privileges"
 	exit $ksft_skip
@@ -469,6 +477,8 @@ if [ ! -x "$(command -v ip)" ]; then
 	exit $ksft_skip
 fi
 
+test_iproute2_supp_or_ksft_skip
+
 modprobe vrf &>/dev/null
 if [ ! -e /proc/sys/net/vrf/strict_mode ]; then
         echo "SKIP: vrf sysctl does not exist"
diff --git a/tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh b/tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh
index e408406d8489..9ed985559c6b 100755
--- a/tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh
+++ b/tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh
@@ -469,6 +469,14 @@ host_vpn_isolation_tests()
 	done
 }
 
+test_iproute2_supp_or_ksft_skip()
+{
+	if ! ip route help 2>&1 | grep -qo "End.DT6"; then
+		echo "SKIP: Missing SRv6 End.DT6 support in iproute2"
+		exit "${ksft_skip}"
+	fi
+}
+
 if [ "$(id -u)" -ne 0 ];then
 	echo "SKIP: Need root privileges"
 	exit $ksft_skip
@@ -479,6 +487,8 @@ if [ ! -x "$(command -v ip)" ]; then
 	exit $ksft_skip
 fi
 
+test_iproute2_supp_or_ksft_skip
+
 modprobe vrf &>/dev/null
 if [ ! -e /proc/sys/net/vrf/strict_mode ]; then
         echo "SKIP: vrf sysctl does not exist"
diff --git a/tools/testing/selftests/net/srv6_end_dx4_netfilter_test.sh b/tools/testing/selftests/net/srv6_end_dx4_netfilter_test.sh
index e23210aa547f..b0bc85db8353 100755
--- a/tools/testing/selftests/net/srv6_end_dx4_netfilter_test.sh
+++ b/tools/testing/selftests/net/srv6_end_dx4_netfilter_test.sh
@@ -311,6 +311,14 @@ router_netfilter_tests()
 	check_and_log_hs_connectivity 2 1 100
 }
 
+test_iproute2_supp_or_ksft_skip()
+{
+	if ! ip route help 2>&1 | grep -qo "End.DX4"; then
+		echo "SKIP: Missing SRv6 End.DX4 support in iproute2"
+		exit "${ksft_skip}"
+	fi
+}
+
 if [ "$(id -u)" -ne 0 ];then
 	echo "SKIP: Need root privileges"
 	exit $ksft_skip
@@ -321,6 +329,8 @@ if [ ! -x "$(command -v ip)" ]; then
 	exit $ksft_skip
 fi
 
+test_iproute2_supp_or_ksft_skip
+
 cleanup &>/dev/null
 
 setup
diff --git a/tools/testing/selftests/net/srv6_end_dx6_netfilter_test.sh b/tools/testing/selftests/net/srv6_end_dx6_netfilter_test.sh
index 9e69a2ed5bc3..9bfbc5bbbdeb 100755
--- a/tools/testing/selftests/net/srv6_end_dx6_netfilter_test.sh
+++ b/tools/testing/selftests/net/srv6_end_dx6_netfilter_test.sh
@@ -316,6 +316,14 @@ router_netfilter_tests()
 	check_and_log_hs_connectivity 2 1 100
 }
 
+test_iproute2_supp_or_ksft_skip()
+{
+	if ! ip route help 2>&1 | grep -qo "End.DX6"; then
+		echo "SKIP: Missing SRv6 End.DX6 support in iproute2"
+		exit "${ksft_skip}"
+	fi
+}
+
 if [ "$(id -u)" -ne 0 ];then
 	echo "SKIP: Need root privileges"
 	exit $ksft_skip
@@ -326,6 +334,8 @@ if [ ! -x "$(command -v ip)" ]; then
 	exit $ksft_skip
 fi
 
+test_iproute2_supp_or_ksft_skip
+
 cleanup &>/dev/null
 
 setup
-- 
2.43.0


             reply	other threads:[~2026-08-24  9:24 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-24  9:15 Alessio Faina [this message]
2026-08-25  8:39 ` [PATCH net] selftest/net: skip srv6_end_d[t/x][4/6]_*_test.sh if iproute2 too old Hangbin Liu
2026-08-25  8:45   ` Hangbin Liu
2026-08-25 22:01 ` Andrea Mayer
2026-08-26 11:49   ` Alessio Faina
2026-08-27  1:07     ` Andrea Mayer
2026-08-27  9:56       ` Alessio Faina
2026-08-28  2:23         ` Andrea Mayer
2026-08-28 16:04           ` Alessio Faina

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260824091537.2305107-1-alessio.faina@canonical.com \
    --to=alessio.faina@canonical.com \
    --cc=andrea.mayer@uniroma2.it \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=horms@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=shuah@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox