[PATCH net-next v9 13/15] ax88179_178a: Update driver name and information

[Birger Koblitz <mail@birger-koblitz.de>]

Add additionally supported devices to Kconfig description, add
further requirements such as PHYLINK.

Update driver name in usb_driver and update MODULE_DESCRIPTION
to include the additionally supported chips.

Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/usb/Kconfig        | 10 +++++++---
 drivers/net/usb/Makefile       |  2 +-
 drivers/net/usb/ax88179_178a.c |  8 ++++----
 3 files changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 115990b0d9537aea2776544c9768b034f32aa7a4..4158455a2da76cd43a9a9d9d0e8c66028d57b095 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -195,11 +195,12 @@ config USB_NET_AX8817X
 	  This driver creates an interface named "ethX", where X depends on
 	  what other networking devices you have in use.
 
-config USB_NET_AX88179_178A
-	tristate "ASIX AX88179/178A USB 3.0/2.0 to Gigabit Ethernet"
+config USB_NET_AX88179
+	tristate "ASIX AX88179/179A/178A USB 3.0/2.0 to Gigabit Ethernet"
 	depends on USB_USBNET
-	select CRC32
 	select PHYLINK
+	select AX88796B_PHY
+	select CRC32
 	default y
 	help
 	  This option adds support for ASIX AX88179 based USB 3.0/2.0
@@ -207,6 +208,9 @@ config USB_NET_AX88179_178A
 
 	  This driver should work with at least the following devices:
 	    * ASIX AX88179
+	    * ASIX AX88179A/B
+	    * ASIX AX88279
+	    * ASIX AX88772D/E
 	    * ASIX AX88178A
 	    * Sitcomm LN-032
 
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile
index 2ecead0181eaf8d66fb6f5dbd6f2905b22b6eb57..4026f19ecb826a6465de38f1d9bb0e4c0af80421 100644
--- a/drivers/net/usb/Makefile
+++ b/drivers/net/usb/Makefile
@@ -12,7 +12,7 @@ obj-$(CONFIG_USB_HSO)		+= hso.o
 obj-$(CONFIG_USB_LAN78XX)	+= lan78xx.o
 obj-$(CONFIG_USB_NET_AX8817X)	+= asix.o
 asix-y := asix_devices.o asix_common.o ax88172a.o
-obj-$(CONFIG_USB_NET_AX88179_178A)      += ax88179.o
+obj-$(CONFIG_USB_NET_AX88179)      += ax88179.o
 ax88179-y := ax88179_178a.o ax88179a_devices.o ax88179_lib.o
 obj-$(CONFIG_USB_NET_CDCETHER)	+= cdc_ether.o
 obj-$(CONFIG_USB_NET_CDC_EEM)	+= cdc_eem.o
diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index 44a768c5808ac1f7071e186d9c86cd6149601971..1d35ef90eceb77b27e8d96e64a008c63b40f4bd7 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -1341,8 +1341,8 @@ static const struct usb_device_id products[] = {
 };
 MODULE_DEVICE_TABLE(usb, products);
 
-static struct usb_driver ax88179_178a_driver = {
-	.name =		"ax88179_178a",
+static struct usb_driver ax88179_driver = {
+	.name =		"ax88179",
 	.id_table =	products,
 	.probe =	usbnet_probe,
 	.suspend =	ax88179_suspend_wrapper,
@@ -1353,7 +1353,7 @@ static struct usb_driver ax88179_178a_driver = {
 	.disable_hub_initiated_lpm = 1,
 };
 
-module_usb_driver(ax88179_178a_driver);
+module_usb_driver(ax88179_driver);
 
-MODULE_DESCRIPTION("ASIX AX88179/178A based USB 3.0/2.0 Gigabit Ethernet Devices");
+MODULE_DESCRIPTION("ASIX AX88179/179A/178A based USB 3.0/2.0 Gigabit Ethernet Devices");
 MODULE_LICENSE("GPL");

-- 
2.47.3