[PATCH net-next 5/8] r8152: support rtl8157_unload and rtl8157_change_mtu

[Chih Kai Hsu <hsu.chih.kai@realtek.com>]

Introduce dedicated rtl_ops callbacks for RTL8157 and RTL8159:
- rtl8157_unload: a dedicated unload callback for RTL8157 and RTL8159
- rtl8157_change_mtu: determines MTPS depending on the packet size,
  with the range of MTPS from 10K to 16K

Signed-off-by: Chih Kai Hsu <hsu.chih.kai@realtek.com>
---
 drivers/net/usb/r8152.c | 47 ++++++++++++++++++++++++++++++++---------
 1 file changed, 37 insertions(+), 10 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 90b628790a148..0cc3e8cedb84d 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -7031,6 +7031,28 @@ static void rtl8156_down(struct r8152 *tp)
 	r8153_aldps_en(tp, true);
 }
 
+static void rtl8157_change_mtu(struct r8152 *tp)
+{
+	u32 max_pkt_size = mtu_to_size(tp->netdev->mtu);
+	u32 ocp_data;
+
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, max_pkt_size);
+
+	/* Use at least 10K for MTPS */
+	ocp_data = max_t(u32, max_pkt_size, 10 * 1024) / 64;
+
+	/* 16 * 1024 / 64 = 0x100, so the max is 0xff for 8 bits data */
+	ocp_data = min_t(u32, ocp_data, 0xff);
+
+	ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, ocp_data);
+	r8156_fc_parameter(tp);
+
+	/* TX share fifo free credit full threshold */
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_CTRL, 512 / 64);
+	ocp_write_word(tp, MCU_TYPE_PLA, PLA_TXFIFO_FULL,
+		       ALIGN(max_pkt_size + tp->tx_desc.size, 1024) / 16);
+}
+
 static void rtl8157_up(struct r8152 *tp)
 {
 	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
@@ -7055,7 +7077,7 @@ static void rtl8157_up(struct r8152 *tp)
 
 	rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX);
 
-	rtl8156_change_mtu(tp);
+	rtl8157_change_mtu(tp);
 
 	/* share FIFO settings */
 	ocp_word_w0w1(tp, MCU_TYPE_PLA, PLA_RXFIFO_FULL, RXFIFO_FULL_MASK,
@@ -10245,11 +10267,6 @@ static void rtl8153_unload(struct r8152 *tp)
 		return;
 
 	r8153_power_cut_en(tp, false);
-
-	if (tp->version >= RTL_VER_16) {
-		/* Disable Interrupt Mitigation */
-		ocp_byte_clr_bits(tp, MCU_TYPE_USB, 0xcf04, BIT(0) | BIT(1) | BIT(2) | BIT(7));
-	}
 }
 
 static void rtl8153b_unload(struct r8152 *tp)
@@ -10260,6 +10277,16 @@ static void rtl8153b_unload(struct r8152 *tp)
 	r8153b_power_cut_en(tp, false);
 }
 
+static void rtl8157_unload(struct r8152 *tp)
+{
+	if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
+		return;
+
+	r8157_power_cut_en(tp, false);
+	ocp_byte_clr_bits(tp, MCU_TYPE_USB, 0xcf04,
+			  BIT(0) | BIT(1) | BIT(2) | BIT(7));
+}
+
 static int r8152_desc_init(struct r8152 *tp)
 {
 	tp->rx_desc.size = sizeof(struct rx_desc);
@@ -10438,13 +10465,13 @@ static int rtl_ops_init(struct r8152 *tp)
 		ops->disable		= rtl8153_disable;
 		ops->up			= rtl8157_up;
 		ops->down		= rtl8157_down;
-		ops->unload		= rtl8153_unload;
+		ops->unload		= rtl8157_unload;
 		ops->eee_get		= r8153_get_eee;
 		ops->eee_set		= r8152_set_eee;
 		ops->in_nway		= rtl8153_in_nway;
 		ops->hw_phy_cfg		= r8157_hw_phy_cfg;
 		ops->autosuspend_en	= rtl8157_runtime_enable;
-		ops->change_mtu		= rtl8156_change_mtu;
+		ops->change_mtu		= rtl8157_change_mtu;
 		tp->rx_buf_sz		= 32 * 1024;
 		tp->support_2500full	= 1;
 		tp->support_5000full	= 1;
@@ -10461,13 +10488,13 @@ static int rtl_ops_init(struct r8152 *tp)
 		ops->disable		= rtl8153_disable;
 		ops->up			= rtl8157_up;
 		ops->down		= rtl8157_down;
-		ops->unload		= rtl8153_unload;
+		ops->unload		= rtl8157_unload;
 		ops->eee_get		= r8153_get_eee;
 		ops->eee_set		= r8152_set_eee;
 		ops->in_nway		= rtl8153_in_nway;
 		ops->hw_phy_cfg		= r8159_hw_phy_cfg;
 		ops->autosuspend_en	= rtl8157_runtime_enable;
-		ops->change_mtu		= rtl8156_change_mtu;
+		ops->change_mtu		= rtl8157_change_mtu;
 		tp->rx_buf_sz		= 48 * 1024;
 		tp->support_2500full	= 1;
 		tp->support_5000full	= 1;
-- 
2.34.1